Cut barrels into containers with lids.

**ParkerFlyer4** · 08-10-2014, 01:34 PM

I tried this today and it work perfectly so I'll share. I got a sealed 55 gallon plastic barrel. I noticed the barrel is slightly tapered at the top. Figured I could cut it to make it fit inside itself for a tight fit sturdy lid.

I measured 1" down and 2" down from the top lip All the way around. I Cut both lines with my sawzall and cleaned up the edges with the grinder.

**Swampy** · 08-11-2014, 04:55 AM

I was pondering the same thing - that looks great (& easy). Thanks for posting.

**jake3340** · 08-11-2014, 07:58 AM

I was thinking about doing something like this with 25ltr frying oil containers. They can be cool cut and used as lids as they come with a handle too.

**etack** · 08-11-2014, 11:01 AM

Use a curricular saw and a pallet like a V-block. I would cut them to fit a brewery I was getting the spent grain from. The curricular saw cuts them real quick. Its easier to have extra hands too. I deburring tool will make a nice edge too.

HDX Deburring Tool-HDX090 at The Home Depot

Eric

**Mechanic688** · 08-11-2014, 01:45 PM

Originally Posted by Swampy

I was pondering the same thing - that looks great (& easy). Thanks for posting.

I thought so too at first but notice how straight he made those cuts? Wasn't easy.

**billygoat** · 08-11-2014, 02:30 PM

Actually, it can be easy to make a straight cut if you know how to set it up. I've never laid out an item that big for hand cutting though. Take a piece of cardboard or paper with a straight edge on one side and wrap it around, overlapping the edges in a straight line. Double check to be sure you have the edges lined up straight, then mark your line. Finding something long enough to wrap around a barrel would be a bit of a challenge though.

**ParkerFlyer4** · 08-11-2014, 06:03 PM

Originally Posted by Mechanic688

I thought so too at first but notice how straight he made those cuts? Wasn't easy.

Actually was easier than I thought. I laid it on its side up against a wall for stability. Started the cut with the sawzall and did about 6"-8" before rolling it to cut more. Make sure to start with the cut closest to the lid first.

**ParkerFlyer4** · 08-11-2014, 06:05 PM

Originally Posted by billygoat

Actually, it can be easy to make a straight cut if you know how to set it up. I've never laid out an item that big for hand cutting though. Take a piece of cardboard or paper with a straight edge on one side and wrap it around, overlapping the edges in a straight line. Double check to be sure you have the edges lined up straight, then mark your line. Finding something long enough to wrap around a barrel would be a bit of a challenge though.

I thought about using "pipe wrap." Its for cutting steel piling at work. The taper on the barrel makes it hard. a perfect cylinder would work.
But All I did was mark 1" and 2" down All the way around. (notice the dots) then connect the dots.

Pipe wrap -

Cut barrels into containers with lids.

Thread Tools

Search Thread

Display

Cut barrels into containers with lids.

The Following 14 Users say Thank You for This Post by ParkerFlyer4:

The Following User Says Thank You to Swampy for This Post:

The Following User Says Thank You to etack for This Post:

The Following User Says Thank You to Mechanic688 for This Post:

The Following User Says Thank You to ParkerFlyer4 for This Post:

Similar threads on the Scrap Metal Forum

- Bins and Barrels

Barrels.

what various different things make good Containers/Bins?

- Good source for 55 gallon plastic barrels

aluminum pet food containers

Thread Information

Users Browsing this Thread

Bookmarks

Bookmarks

Posting Permissions

The Scrap Metal Forum

SMF Recommended Links

SMF on Facebook and Twitter