Quote Originally Posted by miked View Post
Hairdryer might work but I would expect you will need to use at least a small propane torch. Concentrate the heat on the handle not on the shaft. The objective is to get the handle to expand there by making the hole larger.

If all else fails you should be able to remove the shaft from the frame with the handle still attached. You could then place the shaft vertically between the jaws of your vice. This would allow the shaft to dangle while the handle rests ontop of the vice jawa. Using a drift you can now push the shaft from the handle. Best of luck and let us know how it works out. Mike.
Yes, the hairdryer worked just fine. I'm using the cordless drill now and stripping #2. The only thing I'm finding is that the smaller wires tend to go to the left or right of the blade. It won't stay in place.