Page 1 of 2 12 LastLast
Results 1 to 20 of 21

Catalytic Converter

| Scrap Metal Questions and Answers
  1. #1
    TexasDeere started this thread.
    TexasDeere's Avatar
    SMF Badges of Honor


    Member since
    Mar 2012
    Location
    Spring, TX (Houston Suburb)
    Posts
    68
    Thanks
    15
    Thanked 46 Times in 19 Posts

    Catalytic Converter

    I did a cleanout for a guy a few months ago. Part of the junk he had me hauling off were these things. He drove a Dodge Diesel 1 ton truck and said he had to replace the exhaust system on it. It is a post 2007 model truck and he said one of these are the catalytic converter. First question, can someone identify which one of these three pieces is the catalytic converter? Second, I have read several post on this board and I was wondering if there is any value to these beyond the shreddable scrap iron value? I have never tried to sell a catalytic converter but understand some are worth alot of money.






  2. #2
    TexasDeere started this thread.
    TexasDeere's Avatar
    SMF Badges of Honor


    Member since
    Mar 2012
    Location
    Spring, TX (Houston Suburb)
    Posts
    68
    Thanks
    15
    Thanked 46 Times in 19 Posts
    Kris Kringle...Thanks for the info. Are pre-cats worth taking in seperately or should I just throw them in my next tariler load of shreddable? When taking the actual catalytic converter in, other than cutting it away from the other pieces, is there anything I should do to prepare it?

    Thanks in advance.

  3. #3
    SMF Badges of Honor


    Member since
    Oct 2010
    Posts
    234
    Thanks
    71
    Thanked 195 Times in 90 Posts
    Top left is the converter, it's currently worth around $450-650 depending on part numbers on it. look for a 4-digit number and then 3 letters, like AAP, AAB, etc. Top right is the DPF, or diesel particulate filter. Again, depending on part number, it's worth from $50-$250. The part numbers on these pieces are stamped in in a dot-matrix style, can be a real pain in the butt to find. The part numbers are usually located down about 2-3" from the top on either side. The "top" being designated by where those little nibs are sticking up that have threaded bolt holes in them (they are for the diesel injection line brackets to bolt in to). So have the system sitting so those little bolt-hole towers are up top (in your current picture you can just see them sticking out on the bottom) and a few inches down from there, somewhere, will be those part numbers. The bottom piece is the foil/wire pre-converter, it's currently worth around $100. Don't throw any of that into your shred pile. Ever. That system there is currently the most valuable scrap converter being bought. Especially if it's 2008-2009, those are the most valuable.

  4. The Following 5 Users say Thank You for This Post by zito:


  5. #4
    SMF Badges of Honor


    Member since
    Oct 2010
    Posts
    234
    Thanks
    71
    Thanked 195 Times in 90 Posts
    Sorry, was reading through the rest of the threads with new posts, didn't know you were waiting for me to reply. Don't beat me, I'll do better next time!

    http://autocorebuyer.com/catalytic-c...er-prices.html

    down at the bottom of the LH column.

    PS. it was described as "post 2007", not as 2007.
    Last edited by zito; 03-12-2012 at 10:53 PM.

  6. The Following 3 Users say Thank You for This Post by zito:


  7. #5
    TexasDeere started this thread.
    TexasDeere's Avatar
    SMF Badges of Honor


    Member since
    Mar 2012
    Location
    Spring, TX (Houston Suburb)
    Posts
    68
    Thanks
    15
    Thanked 46 Times in 19 Posts
    Wow. Great information everyone. I will look for more specific information (parts numbers, etc.) and get some better pictures. Funny thing is I a drive an '08 Ford F-250 Diesel and had to replace the entire exhaust system about a year ago. It completely clogged at 103,000 miles. Since I had multiple problems with it (exhaust system) from about 20K miles on and had a long service history with it, Ford chipped in and it only cost me $1600 out of pocket. They were originally quoting around over $6K. This guy told me he had about the same problem and had a friend who worked at the dealershiphelp him do it themselves after hours/weekend.

    How do you go about taking these things in without the yard trying to rip you off? I go to multiple yards throughout Houston. My work has me driving all over town so no where is out of the question if anyone has a referal to a good scrap dealer who handles these things.

    Thanks again for everyone's help. I have had these stored for a couple months just because I didn't know how to proceed with them.

    If anyone has anymore info, please pass along.

  8. #6
    SMF Badges of Honor


    Member since
    Oct 2010
    Posts
    234
    Thanks
    71
    Thanked 195 Times in 90 Posts
    You'll probably have better luck finding a buyer who deals specifically in catalytic converters. That's who most scrapyards/wrecking yards sell their own to. At least where I am, the converter buyers are often also the same guys who buy batteries, radiators, alum rims etc.

    I know you can find YouTube videos of the Fords throwing flames out the exhaust pipe. They apparently had a lot of problems with their diesel injection purge system in the cats when they introduced it.

  9. #7
    SMF Badges of Honor


    Member since
    Oct 2010
    Posts
    234
    Thanks
    71
    Thanked 195 Times in 90 Posts
    Let me know when you've got those 1000 converters collected for me MDG, it'll be a nice payday!

  10. The Following User Says Thank You to zito for This Post:


  11. #8
    SMF Badges of Honor


    Member since
    Feb 2012
    Location
    Denver
    Posts
    343
    Thanks
    5
    Thanked 366 Times in 147 Posts
    Technically it is against the law to replace your cat with an OEM without needing too...but don't worry fellas I won't be running to tattle on y'all to the EPA.

  12. #9
    SMF Badges of Honor

    Member since
    May 2011
    Location
    Saint Louis, MO
    Posts
    762
    Thanks
    15
    Thanked 900 Times in 349 Posts
    I know the yard I am at pays 175 for a 2002 honda accord converter and that is the most expensive one they buy. Apparently there are over 70 different styles and prices from 50 to 175. I almost fell off my lunchbox when they said 175. I have crushed 1000s of cars back in the day and we never cut them off. I felt like the biggest dumba$$ ever. I could have had container after container full of them to.

  13. #10
    SMF Badges of Honor

    Member since
    May 2011
    Location
    Saint Louis, MO
    Posts
    762
    Thanks
    15
    Thanked 900 Times in 349 Posts
    I am paying 10 grand for them but charging a shipping and handling fee of 9,999.00 feel free to pm me if you are interested. I pay the most and will send you the money via paypay. There is a 1.00 dollar convenience fee though for using payypal. I hope to hear from all you sellers very soon. Dont miss out on this redhot deal.

  14. #11
    SMF Badges of Honor


    Member since
    Oct 2011
    Location
    Canada
    Posts
    169
    Thanks
    29
    Thanked 72 Times in 40 Posts
    hey pistone.. I have 200, and would like to take you up on your offer =P

  15. #12
    Mick's Avatar
    SMF Badges of Honor



    Member since
    Aug 2010
    Location
    Palermo, Me
    Posts
    3,405
    Thanks
    363
    Thanked 3,086 Times in 1,326 Posts
    Quote Originally Posted by PistoneScrapProcessing View Post
    I am paying 10 grand for them but charging a shipping and handling fee of 9,999.00 feel free to pm me if you are interested. I pay the most and will send you the money via paypay. There is a 1.00 dollar convenience fee though for using payypal. I hope to hear from all you sellers very soon. Dont miss out on this redhot deal.
    Shipping and handling fees are for when YOU ship something to ME. Your deal sounds kind of shady to me.
    People may laugh at me, but that's ok. I laugh all the way to the bank.

  16. #13
    SMF Badges of Honor

    Member since
    May 2011
    Location
    Saint Louis, MO
    Posts
    762
    Thanks
    15
    Thanked 900 Times in 349 Posts
    I hope you realize I am joking I wish there was a sarcasm button on here.

  17. #14
    Mick's Avatar
    SMF Badges of Honor



    Member since
    Aug 2010
    Location
    Palermo, Me
    Posts
    3,405
    Thanks
    363
    Thanked 3,086 Times in 1,326 Posts
    Quote Originally Posted by PistoneScrapProcessing View Post
    I hope you realize I am joking I wish there was a sarcasm button on here.
    Yes. And I figured you'd get the same from my response.

  18. #15
    SMF Badges of Honor


    Member since
    Oct 2010
    Posts
    234
    Thanks
    71
    Thanked 195 Times in 90 Posts
    Quote Originally Posted by Kris Kringle View Post
    Please Don't forget the Disclaimers.

    I could tell you I am paying $7000 a Converter. and use this Disclaimer to Devaule that $7000 to $300.

    Prices/Grades subject to change based on
    market and {assay}
    That is the current price on those converters, MDG. I'm in Alberta, Canada, and my price for the 3 grades of the Dodge diesel converter are $440, $490, and $650. That's just the converter, not including the DPF and foil pre. I know it's the same in Vancouver (give or take a few bucks), and I'm guessing in any major city/competitive market in the U.S. or Canada. Those prices have been up there for almost the past year, not just the last few weeks or something. I believe CoryCouch actually sent that buyer some cats, so maybe once he's heard back from them he can let us know if the prices he was paid matched up to what they listed on their pricelist. They're not going to pay on an assay when you bring in a few cats, they're going to use their pricelist. And of course it's going to change according to the market (in platinum group metals).

  19. #16
    pappawheelie's Avatar
    SMF Badges of Honor

    Member since
    Apr 2013
    Location
    WI
    Posts
    94
    Thanks
    69
    Thanked 148 Times in 48 Posts
    Would a system like this have any demand or higher value as "used parts" or as "scrap"? I know a lot of guys modifying their trucks with aftermarket exhausts. But haven't heard of anyone putting a stock exhaust back on. Found this tread doing a search. I found a used system I could pick up but have been unable to find any "part numbers" on it.

  20. #17
    SMF Badges of Honor



    Member since
    Jan 2011
    Posts
    1,159
    Thanks
    0
    Thanked 248 Times in 169 Posts
    i would like it if you didnt post in 3 year old threads lol

  21. #18
    msmoorad's Avatar
    SMF Badges of Honor


    Member since
    Apr 2013
    Location
    Durban, South Africa
    Posts
    690
    Thanks
    715
    Thanked 746 Times in 356 Posts
    sorry to bring a "dead" thread back to life but can anyone tell me if the catalytic converters from buses are worth anything
    or which kind of buses have the most valuable cat converters?

  22. #19
    eesakiwi's Avatar
    SMF Badges of Honor



    Member since
    Dec 2010
    Location
    NZ
    Posts
    2,531
    Thanks
    2,909
    Thanked 2,556 Times in 1,227 Posts
    Generally I think Diesels have the highest value cats.
    And the bigger the engine the more value, as well as anything European...

    But it pays to check the numbers anyway. If its a good cat that can be resold, better $.

    Also, I think you need to 'rechip' the engine if you remove the cat.
    From what I can figure, the engine will use extra fuel at certain times to 'burn out' the oxides from the cat, in some clever way.
    And then oxygen levels or something get all screwed up if there's no cat, or oxygen sensors where the cats were.

    My cars a 1996 model. The last of the 'old schools', for a reason.

  23. #20
    APA's Avatar
    SMF Badges of Honor


    Member since
    Mar 2016
    Location
    Western Pennsylvania
    Posts
    628
    Thanks
    638
    Thanked 545 Times in 289 Posts
    Someone please delete the last post. We don’t need a fake passport maker.


  24. Similar threads on the Scrap Metal Forum

    1. Value of this catalytic converter?
      By HyderConsulting in forum Vehicle Recycling
      Replies: 24
      Last Post: 10-25-2019, 11:46 PM
    2. Catalytic converter
      By BubbasGarage in forum Vehicle Recycling
      Replies: 72
      Last Post: 04-21-2015, 03:24 PM
    3. How Much Can I Get For This 98 Firebird Catalytic Converter?
      By Ptscrapper in forum Scrap Metal Questions and Answers
      Replies: 4
      Last Post: 01-24-2012, 10:30 PM
    4. Catalytic Converter folks
      By cobre collector in forum Scrap Metal Questions and Answers
      Replies: 12
      Last Post: 01-24-2012, 09:20 AM

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook