Quote Originally Posted by DWJ View Post
George, motors of that size often have the weight stamped into the nameplate data. This will give you a good idea of your profit margin. A crane "drive-by" is your best, safest, option for removal from the roof. If the motors don't already have lifting eyes on them look for a threaded socket in the center/top of the motor to put in a lifting eye. That size motor will usually be a 1/2" thread. Good luck with these. Most of all be safe!
Thanks for the tip.

Right now, they are both sitting on a big piece of ply wood. Waiting to hear from my brother in law. Him and his friend have more experience with this type of situation than I do.



His friend works for a company where they easily process over 10,000 lbs of material several times of weeks.