$$$ Buying Electronic precious metal scrap! $$$ - Page 20

[IF YOU PLAN ON LEAVING US A REVIEW PLEASE PLACE IT ON THIS THREAD. THE ADMIN HAS MADE IT CLEAR HE WILL DELETE ANY REVIEWS FOR CASHFORCOMPUTERSCRAP.COM THAT AREN'T ON THIS THREAD. Admin previously took the time to move them over here but it is now becoming a time consuming task... so IF YOU WANT TO LEAVE A REVIEW PLEASE LEAVE IT HERE. Thanks ]

R2/RIOS Processed!

Buying Electronic Precious Metal Scrap!
Cash for your Computer Scrap | Cash for Computer Scrap

PRICING EFFECTIVE (meaning current)
4-15-2024

ATTENTION: If interested in working with us, please allow us to send you a quote on shipping picked up at your door!
Effective Immediately:
Mail in program criteria:
1. Must have a lot value of $150 or more (if using our prepaid labels, the $150 is the total lot value before shipping deduction)
2. If lot value is less than $150, we request no more than 3 grades of material, pre sorted.

Pricing delivered to our dock (44139)
PRINTED CIRCUIT BOARDS
Please remove batteries and excess AL and Steel - Please remove mercury relays as well. Those will incur a charge if received.
PRICE/LB MATERIAL
$2.40 Motherboards Small Socket (All Colors - P4 and Newer)
$5.50 Motherboards Large Socket (All Colors - Slot, P3 and older)
$2.90 Mid Grade High - Finger Board Trimmed/Devalued, Peripheral Boards, Wireless Router Boards Low End
$1.50 Mid Grade – Mid grade boards that are less populated than mid grade high and/or contain and abundance of contamination and/or are newer with less intrinsic metal content.
$5.25 Finger Boards (Only need to remove OVERSIZED heatsinks, battery... metal bracket is OK)
$6.35 Dual Socket Server Boards - Large Socket
$3.85 Dual Socket Server Boards - Small Socket
$4.35 Telecom Low Grade
$6.35 Telecom Mid Grade
$5.50 CD/DVD Boards (please remove ribbon wire and brown board if attached)
$4.35+ Tape Drive Boards (Paid on sort)
$5.50 Laptop Motherboard Boards

HIGH VALUE PRINTED CIRCUIT BOARDS
PRICE/LB MATERIAL
$10.50 RAMBUS (Memory with METAL Enclosure, also Blank Memory and Memory with Gold Trim cut)
$13.00 Hard Drive Boards (Sorting fee of $.30 per lb. Hard Drive Boards paid on sort once removing Floppy, CD/DVD and Media Boards)
$13.00 Cell Phone Boards CLEAN (please remove excess Plastic, Steel, Screens, Aluminum and Battery)
$-.50/lb Memory Mixed (Sorting fee of $.50 per lb. Memory paid on sort at pricing below)
$25.25 Gold Memory
$11.25 Silver/Tin Memory
$50.00 Gold Fingers (Pricing is for quality cut trim. Little to no Green, otherwise deduction)
$21.00 Slot Processor

OTHER PRECIOUS METAL ITEMS
PRICE/LB MATERIAL

$1.25 Gold Connectors
$5.85 Older Cell Phones w/o battery and back cover removed
$3.25 Smart Phones w/o battery and back cover removed
$2.75 Any Cell Phone with back cover and/or battery
$8.25 IC Chips/Eproms



CPUs (Must be Sorted)
PRICE/LB MATERIAL
$190.00 Intel 386 and 486
$190.00 Motorola
$115.00 Pentium Pro Gold Caps
$75.00 Cyrix/IBM/VIA Gold Cap
$50.00 Pentium Ceramic
$50.00 AMD Ceramic Clean (without Al. Cap. Take $15 off for CPU with Lid)
$55.00 Black Fiber CPU
$20.00 Green/Brown Fiber without Heatsink
$10.00 Green Fiber with Heatsink - Pins
$7.50 Green Fiber with Heatsink - Pinless

COMPUTER/SERVER PARTS
PRICE/LB MATERIAL
$0.85 Hard Drives Complete
$0.60 Hard Drives Complete (Bent, Punched, Crushed - NOT Shredded)
$0.45 Hard Drives w/o Boards
$0.45 Power Supply w/ Wire
$0.35 Power Supply w/o Wire
$0.35 Mixed Floppy/CD/DVD Drives

OTHER ITEMS
PRICE/LB MATERIAL
$1.20 Laptops Complete
$0.90 Incomplete laptops (Must have Motherboard)
$0.40 AC Adapter w/ Wire
$0.30 AC Adapter w/o Wire
$0.85 Mixed Computer Wire
$0.40 Mixed Christmas/Holiday Wire
$1.20 Ribbon wire with ends (Must be PRESORTED from other wire)
$1.20 Cat5/6 with ends (Must be PRESORTED from other wire)
$0.00 Mixed Computer Plastic (NO METAL!)
$0.40 Clean Aluminum Heatsink
$1.05 Clean Cu/Al Heatsink (No fans, plastic or attachments)
$3.40 Silver Plated Brass (Holloware and the similar. No Industrial. Non Magnetic)
$0.00 15" & 17" LCD [per POUND] DESKTOP LCD MONITORS - with or without BASE - BASE - No screen bleeding, gouges, Cracks, Cut cables, water damage . Must be monitor, NOT just a panel
$0.50 19"+ LCD [per UNIT] DESKTOP LCD MONITOR - with or without BASE - No screen bleeding, gouges, Cracks, Cut cables, water damage . Must be monitor, NOT just a panel
-$.10/lb LCD Monitor Scrap (LCD monitors that fail testing are considered scrap and charged at $.10/lb)
$0.50 Laptop Screens [per UNIT] Must be in case, pass light test, be in tact, no bleeding, water damage or cracks. ... Cut wire/bad screen -$0.25/lb (CHARGE) - All Netbooks Screens are Scrap. Please do not send them unless you plan on paying the recycling fee.


BATTERIES (CAREFULLY READ!! CRITERIA BELOW)
PRICE/LB MATERIAL
$0.50 Li Ion Laptop Cell 18650 (NO Swollen Batteries. Exposed terminals MUST be taped)
$0.30 Li Ion Cell Phone Batteries (NO Swollen Batteries. Exposed terminals MUST be taped)
$0.30 Li Ion Polymer - Laptop, Tablet and Cell (NO Swollen Batteries. Exposed terminals MUST be taped) (No ECIG or Lithium Compound batteries!)
$0.40/lb NiMh
-$.15/lb SWOLLEN BATTERIES ARE A CHARGE ITEM
-$.40 CHARGE Terminal Tape Fee
-$.10/lb CHARGE NI CD (Dry Cell)

Prices are subject to change without notice.
Pricing is determined by date of RECEIPT of material unless otherwise noted.

Anything else, send us an email: info@CashForComputerScrap.com Thanks

Originally Posted by Petey

Any idea how long it takes to get a password confirmation email? It's been about an hour and a half. I went thorough step 1 on the home page and then it states an email will arrive shortly (something along those lines). Not in my spam folder either. Thoughts??

Maybe their swamped right now but mine arrived almost right away.

He is referring to the automatic generated email once you register on the site. I sent him a message that his email server is bouncing our emails back to our server.

Just a quick note. As always I keep getting great service from Ewasted. I am shipping on an almost weekly basis these days and everything is great as usual. And I have a bunch of shipments ahead. It is getting crazy around here. Thanks to a great buyer and a great forum member.

great prices, so much positive feedback, love the website will be sending a large load real soon!! Cant wait!

Originally Posted by jghilino

what do you pay for cell phone boards and floppy drive boards? and do you cover the shipping cost?

The cell phone boards are listed on his price list on the first page, $11.75. BTW the updated prices are always on the front page for ewasted.

By floppy drives I assume you are referring to the old 3.5" floppy drives. If so the boards are brown on one side and are considered low grade. I break off the connectors and toss them in with the other connectors with gold plated pins.

If by floppy drives you are in fact referring to cd/dvd drives then those are also in his price list and are $4.05/lb. I hope this answers your questions, Mike.

Thanks Miked!

E are you still on ? I need to cover some last minite things. how is the best way to contact phone, here or pm ?

then the plastic guts with the motors ivd just been tossing in the trash, to much work to take it apart for 2 tiny motors.

Grab those motors with a bigger pair of channel locks and give a twisting jerk and they'll usually pop right off, those are small screws there holding the motors.

We took several pictures this weekend. We will get those taken care of this week. Excess metals - the Battery, Steel plate on the rear of CPU (sometimes plastic) and the heat sinks.

Originally Posted by Blue

I wish I had read the first page more carefully, I just finished today taking all the steel brackets off my many many fingercards, even though it clearly says too on the first page.

On a side note, when using the website to request a freight quote does it show us somewhere once we submit for one that it is currently in the process?
Also, if we want to drop-off our material at your facility should we contact you directly to set that up or use the info@cashforcomputerscrap.com route, or other?

Thanks

Hi Blue,
A human needs to do the quote so typically it is done within a few hours of receipt M-F between 8am and 430 pm.

Contact the general mail box to schedule an appointment. Thanks!