Results 1 to 12 of 12

intro with a ?

| Introduce yourself
  1. #1
    acain started this thread.
    acain's Avatar
    SMF Badges of Honor

    Member since
    Oct 2015
    Location
    florida
    Posts
    17
    Thanks
    0
    Thanked 34 Times in 9 Posts

    intro with a ?

    Hey all. Im not into scrapping full time, but have been doing it on the side for years. Im surprised more people dont. I see it kind of like free money laying around all over the place. All you gotta do is pick it up. Any how, Right now I have a darn good pile stacked up in the back yard and its a mix of everything, including appliances, stainless, aluminum, copper, cast, ect ect. After I sort out the more valuable metals, and batteries, motors, ect.. what i have left is just stuff like old bed frames, metal shelving, metal chairs, rims, ect ect.. the stuff you see a mountain of when you pull into the scrap yard.
    Is this what the call shred? Do some places call it melt? Just something I been wondering. Thanks.


  2. The Following User Says Thank You to acain for This Post:



  3. #2
    t00nces2's Avatar
    SMF Badges of Honor


    Member since
    Jul 2014
    Location
    Sarasota, FL
    Posts
    1,701
    Thanks
    1,191
    Thanked 2,344 Times in 961 Posts
    I believe the answer is yes. It isn't worth much, so don't buy a truck on the hopes of making back the money to pay for it with that pile of bed frames and metal shelving and chairs. You will be pressed to afford a six pack.

  4. #3
    matador's Avatar
    SMF Badges of Honor

    We purchase laptop computers and many components for greater than scrap value. We offer a shipping reimbursement program.replies

    Member since
    Nov 2013
    Location
    Big Wonderful Wyoming
    Posts
    2,310
    Thanks
    1,813
    Thanked 3,204 Times in 1,450 Posts
    I've never heard it called melt, but it's definitely shred. T00nces is right- it doesn't add up to much. Last year, I hauled this load in:


    It paid around $50, before the prices collapsed. To me, shred is the byproduct of the money that you make scrapping.
    More than Scrap Value Shipment Tips: http://www.scrapmetalforum.com/scrap...tml#post242349

  5. The Following 3 Users say Thank You for This Post by matador:


  6. #4
    nutpie's Avatar
    SMF Badges of Honor


    Member since
    Feb 2014
    Location
    maine
    Posts
    441
    Thanks
    379
    Thanked 404 Times in 227 Posts
    Get yourself a nice magnet. And be sure to check the stainless and rims with the magnet.

  7. The Following User Says Thank You to nutpie for This Post:


  8. #5
    acain started this thread.
    acain's Avatar
    SMF Badges of Honor

    Member since
    Oct 2015
    Location
    florida
    Posts
    17
    Thanks
    0
    Thanked 34 Times in 9 Posts
    Yep, I agree it doesnt bring alot. I pick it up anywhere I see it or from friends (they all know to save it for me), where I work, ect. and throw it in the back yard. Theres a good yard not ten minutes away, so every five or six months I haul it over there. Its a hundred bucks or two most the time. Free money to me, so its worth it. Thanks guys.

  9. #6
    SMF Badges of Honor

    Member since
    Jul 2014
    Location
    Southern Pines, North Carolina
    Posts
    150
    Thanks
    89
    Thanked 303 Times in 82 Posts
    I like that truck matador. Does it have a 350 in it?

  10. #7
    matador's Avatar
    SMF Badges of Honor

    We purchase laptop computers and many components for greater than scrap value. We offer a shipping reimbursement program.replies

    Member since
    Nov 2013
    Location
    Big Wonderful Wyoming
    Posts
    2,310
    Thanks
    1,813
    Thanked 3,204 Times in 1,450 Posts
    I wish....

    That truck has a 305. It's a 1987, so it's TBI, not carbureted. It has the automatic 4-speed, and is two wheel drive.

    That was the truck that I was brought home from the hospital in when I was born. My father parked it next to a field where it sat abandoned for nine years. I brought it back to life three years ago. It's rough around the edges, but I'm very happy with it. There's nothing like something you put together yourself.

    Out of the four trucks we have now, it's my favorite.

  11. #8
    SMF Badges of Honor

    Member since
    Jul 2014
    Location
    Southern Pines, North Carolina
    Posts
    150
    Thanks
    89
    Thanked 303 Times in 82 Posts
    Oh, I have a 1986 Firebird Trans am that had the 305 in it. It was the car my Father drove when he was 17. It was parked due to electrical problems, so, I took it out and restored it. It's my favorite car as well but the only place I drive it is church, the parade, and the occasional car show. I really like the paint color on your truck.

  12. #9
    matador's Avatar
    SMF Badges of Honor

    We purchase laptop computers and many components for greater than scrap value. We offer a shipping reimbursement program.replies

    Member since
    Nov 2013
    Location
    Big Wonderful Wyoming
    Posts
    2,310
    Thanks
    1,813
    Thanked 3,204 Times in 1,450 Posts
    Thanks! I did the paint work myself. It's definitely a 10 foot job- there are runs, spots, and other imperfections. I used Oliver tractor green on the main body, and creme for the two-tone roof.


    A 305 in a Pontiac wouldn't be too bad. I'd much rather have the 350- in a headwind or loaded, it could use more power. But, the 2.76 rear end and no air conditioning means that I can get 22MPG on the highway. Not too bad for a V8 pickup....

    I've never been too much of a Pontiac fan (Mostly the later plasticky models), but I've always liked the Camaro/Trans Am. A reliable drivetrain in a lighter-weight body. Sounds like a winning combination!

  13. #10
    SMF Badges of Honor

    Member since
    Jul 2014
    Location
    Southern Pines, North Carolina
    Posts
    150
    Thanks
    89
    Thanked 303 Times in 82 Posts
    Heck, that's better than my '05 F-150. I did a '66 custom in Orange tractor enamel with a cream roof in my teens. My body work and painting skills were limited back then and it was definitely a 15 footer.

    Back to the thread, shred isn't exactly our bread and better, but, it's better than nothing so long as you wisely take into account your expenditures. Like matador said, it's a byproduct of our income source at the moment. I would recommend doing clean out jobs if you can get them. I had a whole business doing that when I was in college and it paid enough for me to live well. Of course it was a college town so dumpster diving after the semester was over was a no brainer, and landlords were itching to get peoples stuff out of the apartment in preparation for the next semester.

    I find I get off topic a lot. Anywho, welcome to the forum! May your stay be long and educational!

  14. #11
    SMF Badges of Honor



    Member since
    Dec 2012
    Location
    elkton,md
    Posts
    1,062
    Thanks
    8,524
    Thanked 1,470 Times in 600 Posts
    Welcome from Maryland

  15. #12
    acain started this thread.
    acain's Avatar
    SMF Badges of Honor

    Member since
    Oct 2015
    Location
    florida
    Posts
    17
    Thanks
    0
    Thanked 34 Times in 9 Posts
    Thank you.


  16. Similar threads on the Scrap Metal Forum

    1. Intro
      By Thecamokid in forum Introduce yourself
      Replies: 9
      Last Post: 07-19-2015, 12:51 AM
    2. Replies: 10
      Last Post: 02-23-2015, 07:16 AM
    3. Intro
      By InsertUserNameHere in forum Introduce yourself
      Replies: 3
      Last Post: 12-17-2012, 12:55 PM
    4. intro
      By streetdoc560 in forum Introduce yourself
      Replies: 8
      Last Post: 12-11-2012, 10:53 PM
    5. Intro: My name is..
      By Woodrow in forum Introduce yourself
      Replies: 10
      Last Post: 11-25-2012, 07:34 PM

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook