Results 1 to 20 of 20

Per Pound for Tower

| General - Let's talk business
  1. #1
    ron22 started this thread.
    SMF Badges of Honor

    Member since
    Apr 2012
    Location
    Forest Lake, MN
    Posts
    248
    Thanks
    7
    Thanked 96 Times in 51 Posts

    Per Pound for Tower

    What is the most you would pay per pound for a computer tower?
    I had someone call that has pallets of computers. He usually ships them out in a full semi at a time. He said he is getting $0.60 a lb like this.
    He is looking for other options so he does not have to store them untill he has a full load. He said he currently has 12 pallets at about 2000lbs each. He would guess about 90% of the computers are complete. The other 10% have the Harddrive removed.

    I usually pay $5 a computer if complete like most here. He is not interested in per unit but per pound. Doing the math of the average computer weighting 30lbs it comes out to $0.16 a lb. Assuming I make $15 per unit that comes out to $0.50 a lb.

    So two questions
    Is he full of it with his $0.60 a pound number?
    What is the most you would offer per pound?



  2. #2
    Ecycle Atlanta's Avatar
    SMF Badges of Honor

    Member since
    Apr 2011
    Location
    Outside Atlanta
    Posts
    734
    Thanks
    291
    Thanked 692 Times in 326 Posts
    Ron, I've been in some scrap yards where they are palletizing the computers and have buyers coming in and buying large lots at .40 per pound and up. I think the .60 is high and would love to find a buyer at that price because I'll just wholesale computers and never take another one apart. Of course its probably an overseas buyer that will only deal in large loads, and they pay more for it. My guess is that some buyers are speculating that the price of precious metals will only go up and choose this as a good investment. Most other types of investments are flat now so it makes sense. You should stick to the $5 per unit price unless there are a lot of obvious indications of higher value (old computers with nice cpu's, or newer computers with resellable parts).

  3. The Following 2 Users say Thank You for This Post by Ecycle Atlanta:


  4. #3
    SuperDave's Avatar
    SMF Badges of Honor


    Member since
    May 2012
    Location
    Usa
    Posts
    448
    Thanks
    526
    Thanked 278 Times in 170 Posts
    I think he is full of it. 12 pallets x 2000 pounds = 24,000 lbs @$0.60 = 14,400$
    You can't touch that price. Unless you are a refiner...Even then...
    I would like to know who is buying these at that price..?
    I also pay 5$ per computer sometimes 3$...
    The yard here pays $0.29 a pound.

  5. #4
    jghilino's Avatar
    SMF Badges of Honor

    Buying Specialty Escrap of all kinds, resale grade computer parts

    Member since
    Sep 2012
    Location
    KANSAS CITY
    Posts
    2,672
    Thanks
    1,429
    Thanked 1,453 Times in 919 Posts
    10 cents a pound on the safe side, cant go wrong buying it at shred price. 20 cents a pound is the most id go. Upon verification that each machine is complete. He is trying to BS you with fake prices. None pays 60 cents a pound, thats $18 for an average machine.
    I buy and sell all types of scrap and escrap. I buy specialty and hard to sell escrap. I buy resale items. PM me or contact me at jghilino@hotmail.com
    I AM ACTIVELY BUYING ESCRAP OF ALL TYPES. BOARDS, RAM, CPUS AND MUCH MORE

  6. #5
    EcoSafe's Avatar
    SMF Badges of Honor



    Member since
    May 2011
    Posts
    3,705
    Thanks
    3,713
    Thanked 6,807 Times in 1,954 Posts
    computer lots go every day on the auctions for that kind of price. why, I don't know othe then they are considered surrplus rather then scrap. .60 fo scrap computes is just plain nuts.

    If you and he/she are local , start here: deduct .10 minimum per lb for shipping, you ae hauling them at your expence. you ae going to reduce his labor expence, deduct another .10. how much pe sq foot is his storage space worth to him. deduct another .10. he pays no more then .10 per lb fo them, so you ae going to doubble his investment, no muss no fuss, no labor , no storage cost, no shipping cost. win win for both of you, this is the fomula I used on both my local yards.

    now go close the deal, and just pm me for the addess as to where to send my 10% consulting fee .
    "anyone who thinks scrappin is easy money ain't doin it right!"

  7. The Following 2 Users say Thank You for This Post by EcoSafe:


  8. #6
    happyscraper's Avatar
    SMF Badges of Honor


    Member since
    Feb 2012
    Location
    spring hill,fl
    Posts
    2,864
    Thanks
    350
    Thanked 1,371 Times in 847 Posts
    .25 cents is the most I would pay for those computers. Offer him .25 and when he says no hand him a card with your name and number and tell him to call you when he changes his mind. I bet with in a few days he'll call and at least make a better offer if not take the .25.

  9. The Following 2 Users say Thank You for This Post by happyscraper:


  10. #7
    ron22 started this thread.
    SMF Badges of Honor

    Member since
    Apr 2012
    Location
    Forest Lake, MN
    Posts
    248
    Thanks
    7
    Thanked 96 Times in 51 Posts
    I went out and talked to the guy. He had a warehouse full of Computer, Monitors, Printers...
    He showed me what they do. Sort threw the stuff. Daul Core and higher get sold to a reseller. Anything that looks incomplete gets set aside and torn down later. All other computers go on pallets. Monitors go on pallets. Printers go on pallets. Servers go on there own. All the pallets get sold complete to buyers.
    He said he currently has 3 buyers at $0.60lb. He gets more than they can handle so he is looking for more. He said would take a little less then $0.60 but do not insult me.
    I told him after I broke everything down I would get $0.50 maybe $0.60a lb.
    He then offered to buy complete computers from me for $0.45lb as long as I bring in around 2000lbs at a time.
    He also said he would pay higher then I am currently getting for MotherBoards, RAM, Harddrives ....
    He said he gets better prices becuase he will ship 1000lbs of motherboards 500lbs RAM in at a time. Something about go big or go home.

  11. #8
    EcoSafe's Avatar
    SMF Badges of Honor



    Member since
    May 2011
    Posts
    3,705
    Thanks
    3,713
    Thanked 6,807 Times in 1,954 Posts
    sounds like he needs to be on the foum in the buyes section or is 10,000 sellers too small time for him ?

    something just dosent add up here when ya figgue in all the costs. just my .02
    Last edited by EcoSafe; 12-11-2012 at 06:39 PM.

  12. #9
    ron22 started this thread.
    SMF Badges of Honor

    Member since
    Apr 2012
    Location
    Forest Lake, MN
    Posts
    248
    Thanks
    7
    Thanked 96 Times in 51 Posts
    Quote Originally Posted by olddude View Post
    sounds like he needs to be on the foum in the buyes section or is 10,000 sellers too small time for him ?
    I think the problem is he does not want to deal with small qty and most people seem to do that.

    Not sure if the numbers add up but if I can buy then at $0.10lb and sell to him at $0.45lb It works for me. But right now I do not have 2000lbs of complete towers

  13. #10
    Ecycle Atlanta's Avatar
    SMF Badges of Honor

    Member since
    Apr 2011
    Location
    Outside Atlanta
    Posts
    734
    Thanks
    291
    Thanked 692 Times in 326 Posts
    I dont claim to have any specific insight here, but I find that when the big boys start overpaying for stuff they have a good reason. Maybe some inside info on the market, or maybe they are in a position to manipulate the market (in their specific region)? I'm not saying you should follow suit, but people dont typically pay top dollar for no good reason. You just need to figure out where you can fit in and make a few $$ along the way.

  14. The Following 2 Users say Thank You for This Post by Ecycle Atlanta:


  15. #11
    EcoSafe's Avatar
    SMF Badges of Honor



    Member since
    May 2011
    Posts
    3,705
    Thanks
    3,713
    Thanked 6,807 Times in 1,954 Posts
    could be. when I first showed up in my old scrap tuck in my dirty work cloths one yard shot me a get outa here price too. funny how the secound tip in my mother in laws Escilade opened new avenues of dialog.

    back in the day when I first stated racing it was run what ya brung, today its 3 million bucks minimum and by any means necessary if ya want to play in the bigs.

    we are headed in the same diection.

    A little over a year ago companys were paying to have computer scrap hauled away. Now we are paying .60 per LB?
    Last edited by EcoSafe; 12-11-2012 at 07:27 PM.

  16. #12
    Russell's Avatar
    SMF Badges of Honor

    Member since
    Jan 2012
    Location
    Chicago,Il
    Posts
    815
    Thanks
    495
    Thanked 707 Times in 324 Posts
    Sellers like that have buyers that have means to part out/ fix or have means to refine themselves. Remember not everyone is buying oranges like you. Some people are buying apples* (pun intended). In all seriousness, I've learned from a similar situation. The process in which one buys and resells is different from person to person. If youre comparing apples to apples and oranges to oranges then there is a profitability ceiling.

    More than likely they have found an avenue different than yours as far as resale value.

  17. #13
    EcoSafe's Avatar
    SMF Badges of Honor



    Member since
    May 2011
    Posts
    3,705
    Thanks
    3,713
    Thanked 6,807 Times in 1,954 Posts
    obviously!!!!! just scanned the Gov auctions. towers are avg .50 per lb plus fees and shipping, lap tops $50 ++ no hard dives no op sys parts missing.

  18. #14
    jghilino's Avatar
    SMF Badges of Honor

    Buying Specialty Escrap of all kinds, resale grade computer parts

    Member since
    Sep 2012
    Location
    KANSAS CITY
    Posts
    2,672
    Thanks
    1,429
    Thanked 1,453 Times in 919 Posts
    Quote Originally Posted by ron22 View Post
    He said he currently has 3 buyers at $0.60lb.
    where are the 3 buyers that pay 60 cents a pound??? i think that is the information we all want to know, would save alot of time on teardowns if i could just sell desktops outright at $18 each

  19. The Following User Says Thank You to jghilino for This Post:


  20. #15
    ron22 started this thread.
    SMF Badges of Honor

    Member since
    Apr 2012
    Location
    Forest Lake, MN
    Posts
    248
    Thanks
    7
    Thanked 96 Times in 51 Posts
    Quote Originally Posted by jghilino View Post
    where are the 3 buyers that pay 60 cents a pound??? i think that is the information we all want to know, would save alot of time on teardowns if i could just sell desktops outright at $18 each
    That I could not get out of him. But he did say he had to ship a full semi at a time to get that price.

  21. #16
    jghilino's Avatar
    SMF Badges of Honor

    Buying Specialty Escrap of all kinds, resale grade computer parts

    Member since
    Sep 2012
    Location
    KANSAS CITY
    Posts
    2,672
    Thanks
    1,429
    Thanked 1,453 Times in 919 Posts
    I am still calling BS on there being any 60 cent buyers out there. And that pricing is the same whether you sell 1 pound or 10,000 pounds. I find that the real high grade stuff actually sells at a higher price the smaller the lot is.

    I do like the 45 cent offer he made you. Id be scrambling to find computers at that price.
    Last edited by jghilino; 12-11-2012 at 09:37 PM.

  22. The Following User Says Thank You to jghilino for This Post:


  23. #17
    SuperDave's Avatar
    SMF Badges of Honor


    Member since
    May 2012
    Location
    Usa
    Posts
    448
    Thanks
    526
    Thanked 278 Times in 170 Posts
    When you think of it, my yard here pays $0.29 per pound on complete towers. Then they resell it, ship it, what price are they getting? Make 15-20 cents per pound at least...they gotta make it worthwhile.
    Otherwise why buy it? I mean all the overhead and expenses.

  24. #18
    SMF Badges of Honor


    Member since
    Feb 2012
    Location
    Denver
    Posts
    343
    Thanks
    5
    Thanked 366 Times in 147 Posts
    I am buying complete PCs at $0.35 lb. and laptops at $0.40 and we have a healthy margin factored in. That being said...I don't think $0.60 lb. is too unrealistic, but it does seem a little high.

  25. #19
    ddelatorre14's Avatar
    SMF Badges of Honor


    Member since
    Aug 2012
    Location
    Kutztown PA
    Posts
    94
    Thanks
    30
    Thanked 57 Times in 23 Posts
    $0.60lb is way too high unless your going to refurb it. Even then the margin is too tight to make any real money!
    Daniel De La Torre
    JMD Recycling Services Inc.
    www.jmdrecycle.com
    dtorre@jmdrecycle.com

  26. #20
    KzScrapper's Avatar
    SMF Badges of Honor


    Member since
    Apr 2011
    Location
    Denver Metro, CO
    Posts
    4,841
    Thanks
    7,019
    Thanked 5,792 Times in 2,417 Posts
    Had a guy call me today from my Clist add of thing I pick up. He offered me .15# for my towers and up to $2# for high grade boards.

    I just had to laugh say no I'm all set.
    Recyclable Material Merchant Wholesaler
    Certified Zip-Tie Mechanic
    "Give them enough so they can do something with it, but not too much that they won't do nothing."

  27. The Following 2 Users say Thank You for This Post by KzScrapper:



  28. Similar threads on the Scrap Metal Forum

    1. Desktop Tower Analysis
      By Reelman65 in forum Scrap Metal Tips and Advice
      Replies: 24
      Last Post: 12-10-2012, 04:29 PM
    2. $12.00 per tower??
      By thirsty in forum General Electronics Recycling
      Replies: 23
      Last Post: 10-20-2012, 01:30 PM
    3. price per tower??
      By ozzy214 in forum General Electronics Recycling
      Replies: 18
      Last Post: 10-01-2012, 01:06 AM
    4. Troy pound or pound?
      By azscrapper in forum General Electronics Recycling
      Replies: 10
      Last Post: 08-10-2012, 09:35 PM
    5. Tower buy question...
      By sillllvar in forum General Electronics Recycling
      Replies: 7
      Last Post: 04-14-2012, 01:16 PM

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook