Results 1 to 19 of 19

Craigslist Rules!

| General - Let's talk business
  1. #1
    matt018 started this thread.
    matt018's Avatar
    SMF Badges of Honor


    Member since
    Dec 2010
    Location
    Southeast PA
    Posts
    174
    Thanks
    12
    Thanked 23 Times in 15 Posts

    Craigslist Rules!

    I posted my first Craigslist add last night for scrap removal, This morning I got a call from a roofer who had allot of steel to get rid of. At first he said that he was 25 minutes away so I kinda was shying away from it. But then he said there was another scrapyard nearby. So I figured i didn't have anything else to do today so i went to go see. Well the roof was on top of a super Walmart I was in my '93 Ranger and they were 10 foot pieces along with some smaller bits. So I left the tailgate down and filled it up and took my first load over. it was 920 pounds and at .10 i made 92. when i got back they said they still had allot more to go so i called my dad and had him come over in the '87 Chevy which has an 8 foot bed. So I loaded my truck and we filled his with what was left. On the next load my truck had 1200 in it and my dads had 800. so for the day I got $292 and a contact with a roofer so i gave him my business card and hopefully i can get some more business from him.
    Also that was the most weight i had ever put in the ranger and was very impressed with what it could handle.

    Here is my Craigslist add if anyone is curious

    Old appliances, Junk, Scrap metal


    This is my truck with 1200 pounds in it

    Last edited by matt018; 07-19-2012 at 05:34 PM.

  2. The Following 8 Users say Thank You for This Post by matt018:



  3. #2
    Scrapcrazy's Avatar
    SMF Badges of Honor



    Member since
    Jul 2012
    Location
    Oklahoma
    Posts
    321
    Thanks
    153
    Thanked 321 Times in 125 Posts
    Good haul and good story Matt. I wish you continued success!

  4. #3
    SMF Badges of Honor



    Member since
    Feb 2012
    Location
    OK
    Posts
    5,728
    Thanks
    6,814
    Thanked 3,464 Times in 1,989 Posts
    what 93 ranger do you have ? It could be a 3/4 ton. My 93 is a 3/4. I have a Ford shop manual CD, if you'll get your numbers off the door I'll tell you the specs on it. There's a row of numbers along the bottom, GVW, trans, axle, etc, tell me what each one of those says, and I can tell you what each one of them is

  5. #4
    matt018 started this thread.
    matt018's Avatar
    SMF Badges of Honor


    Member since
    Dec 2010
    Location
    Southeast PA
    Posts
    174
    Thanks
    12
    Thanked 23 Times in 15 Posts
    Its a 93xl I am not sure what the specs are because the door sticker is missing. Im not sure if it was hit or had doors replaced before i bought it. I have only had the truck for a little over a month. I know its atleast a half ton for sure I am gonna try to put up a picture of both trucks.

  6. #5
    brandon's Avatar
    SMF Badges of Honor


    Member since
    Oct 2011
    Location
    North Carolina
    Posts
    787
    Thanks
    46
    Thanked 673 Times in 310 Posts
    ive got an 89 ranger 4x4 that i scrap in and the most weight i have had on it was 2200#, i know that is pushing it big time but she took off and stopped just fine.
    looks like poo but runs good and will haul anything you want to put in it.
    My fortune cookie said:
    You discover treasures where others see nothing unusual.

  7. The Following User Says Thank You to brandon for This Post:


  8. #6
    SMF Badges of Honor



    Member since
    Feb 2012
    Location
    OK
    Posts
    5,728
    Thanks
    6,814
    Thanked 3,464 Times in 1,989 Posts
    is it a 4x4 with a tow package on it? looks a lot like mine there

  9. #7
    matt018 started this thread.
    matt018's Avatar
    SMF Badges of Honor


    Member since
    Dec 2010
    Location
    Southeast PA
    Posts
    174
    Thanks
    12
    Thanked 23 Times in 15 Posts
    its a 2x4 and has the trailer harness except the ball is on the bumper.

  10. #8
    SMF Badges of Honor



    Member since
    Feb 2012
    Location
    OK
    Posts
    5,728
    Thanks
    6,814
    Thanked 3,464 Times in 1,989 Posts
    trailer harness ? do you mean wiring harness ?

  11. #9
    SMF Badges of Honor



    Member since
    Feb 2012
    Location
    OK
    Posts
    5,728
    Thanks
    6,814
    Thanked 3,464 Times in 1,989 Posts
    I'm sure yours is the long wheelbase (125" center to center) and there's 3 possibilities for the 2x (2) of em are 1240 payload, (1) is a 1550 lb payload. It's not a 114" Wheelbase is it?

  12. #10
    KeyCityRecycling's Avatar
    SMF Badges of Honor


    Member since
    Jul 2012
    Location
    Iowa
    Posts
    94
    Thanks
    0
    Thanked 57 Times in 36 Posts
    $200 dollars a ton for tin, shred, sheet iron (what ever you want to call it). That is a good price.

  13. #11
    matt018 started this thread.
    matt018's Avatar
    SMF Badges of Honor


    Member since
    Dec 2010
    Location
    Southeast PA
    Posts
    174
    Thanks
    12
    Thanked 23 Times in 15 Posts
    Yes wiring harness. and im not quite sure. how should i determine that?

    and yes i was happy with the price. i feel like i certainly made out well.

  14. #12
    SMF Badges of Honor


    Member since
    Nov 2010
    Location
    Boise, ID
    Posts
    2,702
    Thanks
    2,237
    Thanked 2,352 Times in 1,014 Posts
    Quote Originally Posted by matt018 View Post
    Yes wiring harness. and im not quite sure. how should i determine that?

    and yes i was happy with the price. i feel like i certainly made out well.
    You grab a tape measure and measure from the center of one wheel to the center of the other.



    Good haul you got. Was wondering what you've been up to. Haven't seen you around much.

    Got a call to come get an oil tank. I asked if it was empty, She said yes, but the person she called before me said it was too heavy. So by that I figured it had some, but took a look anyways. Yep. Half full on what I guess is a 200 gallon tank at least.

    It should be a treat and a half to get out.

    Dunno if oil dealers buy back oil. About to find out come Monday.

  15. The Following User Says Thank You to IdahoScrapper for This Post:


  16. #13
    matt018 started this thread.
    matt018's Avatar
    SMF Badges of Honor


    Member since
    Dec 2010
    Location
    Southeast PA
    Posts
    174
    Thanks
    12
    Thanked 23 Times in 15 Posts
    well over the winter i got a job for a landscaper as a truck and equip mechanic. that ended as the owner is down on his luck right now so im back to scrapping. and thanks for the info. ill measure it in the morning and report back

    If you have an electric pump it will suck the oil right out, and perhaps you could sell it on craigslist for cheap? i know its the wrong season to sell heating oil though.

  17. #14
    Mechanic688's Avatar
    SMF Badges of Honor



    Member since
    Mar 2011
    Location
    Warsaw , Ind. In the heart of the lakes, and down the street from the hotel where Al Capone stayed.
    Posts
    9,568
    Thanks
    11,247
    Thanked 10,730 Times in 4,728 Posts
    Quote Originally Posted by IdahoScrapper View Post
    You grab a tape measure and measure from the center of one wheel to the center of the other.
    Good haul you got. Was wondering what you've been up to. Haven't seen you around much.

    Got a call to come get an oil tank. I asked if it was empty, She said yes, but the person she called before me said it was too heavy. So by that I figured it had some, but took a look anyways. Yep. Half full on what I guess is a 200 gallon tank at least.
    It should be a treat and a half to get out.

    Dunno if oil dealers buy back oil. About to find out come Monday.
    Dealers over here will not buy back once they drop it. If it's fuel oil, or kero you should be able to sell it to a farmer real easy, they mix it into the tractor diesel tanks. I sold 150 or so gallon for $1.50 a gal and the farmer was overjoyed and he came and removed it. (they have the pumps for it you know) Just a thought.
    P & M Recycling - Specializing in E-Waste Recycling.
    If you enjoy your freedom, thank a vet.

  18. The Following 2 Users say Thank You for This Post by Mechanic688:


  19. #15
    SMF Badges of Honor


    Member since
    Nov 2010
    Location
    Boise, ID
    Posts
    2,702
    Thanks
    2,237
    Thanked 2,352 Times in 1,014 Posts
    Quote Originally Posted by Mechanic688 View Post
    Dealers over here will not buy back once they drop it. If it's fuel oil, or kero you should be able to sell it to a farmer real easy, they mix it into the tractor diesel tanks. I sold 150 or so gallon for $1.50 a gal and the farmer was overjoyed and he came and removed it. (they have the pumps for it you know) Just a thought.
    I tossed it on CL last night. No bites as of yet. I'll post under farm/garden to see if a farmer wants it. Pretty certain it's kerosene. Don't know what kerosene is worth around here.

    I'm guessing the farmer had a gauge that showed how much he pumped out? I'm totally guessing here as far as tank size and remaining gallons, though really anything made would be "profit".

    Sorry for hijacking your thread Matt.

  20. #16
    matt018 started this thread.
    matt018's Avatar
    SMF Badges of Honor


    Member since
    Dec 2010
    Location
    Southeast PA
    Posts
    174
    Thanks
    12
    Thanked 23 Times in 15 Posts
    Dont worry about it buddy, Its good you figured out what to do with your oil.

  21. #17
    SMF Badges of Honor



    Member since
    Feb 2012
    Location
    OK
    Posts
    5,728
    Thanks
    6,814
    Thanked 3,464 Times in 1,989 Posts
    Actually the 114 and the 125 WB both had the same on the low side of 1250lb payload, I think the 125 with the heavy tow package was a bit more than the 114, 1550/1650 . Payload = anything besides the from factory truck + full tank of gas ( I think they figure the weight of a full tank included) but everything else (including the driver, the owner manual, gloves in the glovebox etc, are all included in "payload")

  22. #18
    SMF Badges of Honor


    Member since
    Nov 2010
    Location
    Boise, ID
    Posts
    2,702
    Thanks
    2,237
    Thanked 2,352 Times in 1,014 Posts
    Ohh that's just it...I haven't figured out what to do with it yet.

  23. #19
    XZAV38's Avatar
    SMF Badges of Honor



    Member since
    Jun 2012
    Location
    OXFORD AL
    Posts
    127
    Thanks
    1
    Thanked 79 Times in 30 Posts
    I posted an ad on Craigslist, and that is where I had a call about some a/c widow units, that made my day, but now I am getting some people calling me and giving fake addresses, thinking I'm some kind of idiot.
    Has anyone have the same problem??????


  24. Similar threads on the Scrap Metal Forum

    1. rules for AC disposal
      By JJ9000 in forum Off Topic Discussions
      Replies: 17
      Last Post: 07-04-2012, 07:28 PM
    2. How to Post and Bump a Scrap Metal Services Thread
      By Andrew in forum Scrap Metal Removal, Junk Car Removal and Metal Recycling Services
      Replies: 0
      Last Post: 05-17-2011, 12:57 PM

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook