This is the biggest chunk of solid copper I've ever come across. 5' & 35lbs before stripping. Some kind of underground wire. Was a b!tch to strip. Enjoy
Copper sheath around main wire.
|
Mega chunk of COPPER wire
This is the biggest chunk of solid copper I've ever come across. 5' & 35lbs before stripping. Some kind of underground wire. Was a b!tch to strip. Enjoy
Copper sheath around main wire.
Metal Recycling Entrepreneur
|
what was the finished weight? too bad it wasn't a longer piece..! how did you come across it?
Metal Recycling Entrepreneur
My dad just gave me a couple of pieces of this from his work. How did you strip it? The biggest part of insulation also stinks when cut. Any body know what it is
|
It looks to be teflon.Originally Posted by scrapping4ever
P & M Recycling - Specializing in E-Waste Recycling.
If you enjoy your freedom, thank a vet.
|
|
I'm guessing there was 8-10lbs of weather stripping on it, so about 25lbs.
Yeah, longer and more of em.
I got it somewhere in the Dakotas
|
|
I stripped it with a __________stripper. But, before I had that machine, when I got large pieces I would cut them into about 12"-16" pieces. Then put your piece in a vice. Then using a reciprocating saw with a wood blade cut lengthwise as far as the blade will reach' then flip the wire 180, lined up with your first cut, and cut the rest of the length of it. I use a wood blade just because they are longer than the metal blades. (Less cutting) On this stuff I would say you would have to make your lengthwise cuts at least 4 times. 12oclock, 3oclock, 6, 9. The outer layer comes off like rubber, but the inner white stuff is quite firm. Then just pry out the copper with a screwdriver. Hope that makes sense.
As far as the smell, it's because the wire got hot when it was in use. Personally I love that smell, cuz it means more scrap
Last edited by pjost; 04-20-2014 at 09:28 PM. Reason: Removed make/model of stripper...sorry.
Metal Recycling Entrepreneur
I just used one of those old knifesto strip this
to claim my prize
this did have that copper sheet over but I already removed it
|
|
@scrapping4ever: lol I make it all complicated and you are just like "I used this old knife". Love it
Metal Recycling Entrepreneur
I tried the sawzall method and it got me ****** off. So I just used the knife@scrapping4ever: lol I make it all complicated and you are just like "I used this old knife". Love it
|
I have been able to get a couple of cable like that, just not quite that thick. I used my angle grinder with the thin metal cutoff blade, seemed to work pretty well, sliced right thru the hard rubber covering.
Metal Recycling Entrepreneur
What would that kind of cable come from?
|
|
I believe it is underground wire, but I could be wrong. Weatherstripping says 128kv. That's a lotta juice.
Metal Recycling Entrepreneur
|
I found one of these in the woods once, about three feet long, Man I was like a Kid in a candy store!!!
There are currently 1 users browsing this thread. (0 members and 1 guests)
|
Browse the Most Recent Threads
On SMF In THIS CATEGORY. 
OR 
|
Posting Permissions
Register To Reply
Bookmarks