Results 1 to 20 of 25

Hybrid View

  1. #1
    BRASSCATCHER's Avatar
    SMF Badges of Honor


    Member since
    Feb 2012
    Posts
    2,476
    Thanks
    3,419
    Thanked 3,934 Times in 1,371 Posts
    Maybe a stupid question but want to make sure what I am doing is ok. I hit the hd with a ballpein cracking the alum case and breaking part of the platter. Then I take a chunk of the platter and throw in my alum bucket and then turn in the hd to my buyer. I do this so I am not losing too much weight from the hd. By doing this am I doing enough to ensure that the platter is made unreadable because of the missing piece? I don't get a large volume of hd's when I get towers and servers so this is the quickest way for me to ensure that the hd's are unreadable.

    I won't be wronged. I won't be insulted. I won't be laid a-hand on. I don't do these things to other people, and I require the same from them.” John Wayne-- The Shootist

    NEWBS READ THIS THREAD ABOUT REFINING!!!!
    http://www.scrapmetalforum.com/off-t...ning-read.html

  2. #2
    jghilino's Avatar
    SMF Badges of Honor

    Buying Specialty Escrap of all kinds, resale grade computer parts

    Member since
    Sep 2012
    Location
    KANSAS CITY
    Posts
    2,673
    Thanks
    1,422
    Thanked 1,452 Times in 918 Posts
    arnt there companies out there that shred drives that would pay you for them or take them for free, they have to be making a killing on the scrap hard drive boards plus all the aluminum and stainless they generate? i would have a few guys tearing boards off and another one feeding the shredder


  3. #3
    wdaddy started this thread.
    SMF Badges of Honor



    Member since
    Aug 2011
    Posts
    224
    Thanks
    27
    Thanked 224 Times in 66 Posts
    Quote Originally Posted by jghilino View Post
    arnt there companies out there that shred drives that would pay you for them or take them for free, they have to be making a killing on the scrap hard drive boards plus all the aluminum and stainless they generate? i would have a few guys tearing boards off and another one feeding the shredder
    They don't take anything for free. They charge $10 per drive to do this. I looked into one of these and would have not way to recoup the costs of $18,000 for a small model... then you have to find a buyer for your mixed drive scrap....

    I charge less, keep it local, and recycle all my waste locally.

  4. The Following User Says Thank You to wdaddy for This Post:


  5. #4
    jghilino's Avatar
    SMF Badges of Honor

    Buying Specialty Escrap of all kinds, resale grade computer parts

    Member since
    Sep 2012
    Location
    KANSAS CITY
    Posts
    2,673
    Thanks
    1,422
    Thanked 1,452 Times in 918 Posts
    my method of choice, remove the board then have at it:

  6. #5
    Bear is offline Metal Recycling Entrepreneur
    SMF Badges of Honor



    Member since
    Feb 2012
    Location
    OK
    Posts
    5,731
    Thanks
    6,810
    Thanked 3,466 Times in 1,991 Posts
    Quote Originally Posted by BRASSCATCHER View Post
    Maybe a stupid question but want to make sure what I am doing is ok. I hit the hd with a ballpein cracking the alum case and breaking part of the platter. Then I take a chunk of the platter and throw in my alum bucket and then turn in the hd to my buyer. I do this so I am not losing too much weight from the hd. By doing this am I doing enough to ensure that the platter is made unreadable because of the missing piece? I don't get a large volume of hd's when I get towers and servers so this is the quickest way for me to ensure that the hd's are unreadable.
    There's NO stupid questions, those are just the easiest ones to answer ; ) In light of what's been said on this thread alone, I believe you should be relatively worry free. I've also read in indepth studies that using the hammer was more than enough. I have been through a LOT of computers, and drives over the last ten or 12 years, including ones from FBI, Homeland Security, Dept Commerce, Census etc, and never lost a moments sleep worrying about their data being retrieved or "stolen". The horror stories are most likely related to gross negligence on the part of the "victim" (or maybe just plain ignorance). I've have a NASA hard drive nearly ten years (it snuck past them inside a large unit, I didn't know it was a HD either until beginning to dismantle it), and this thing weighs 35 pounds! I've advertised it on both Ebay and Craigslist numerous times, but the shipping alone was prohibitive(if anyone had wanted data, and won't pay shipping, how will they spend thousands to retrieve it). Ohwelll! I almost believe for someone to connect with someone's important data, they'd need to stalk the original owner until they disposed of their computer, then wait until you removed it from their storage, then stalk you until you disposed of the HD, then stalk your buyer until, ohboy!! Why didn't they just follow the person to the ATM in the first place, and grab the receipt he tossed on the sidewalk as he was walking away??

  7. The Following 3 Users say Thank You for This Post by Bear:


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook