Results 1 to 17 of 17

What is this UPS part?

| Scrap Metal Questions and Answers

Hybrid View

  1. #1
    robaz started this thread.
    robaz's Avatar
    SMF Badges of Honor

    Member since
    Jan 2018
    Location
    Arizona
    Posts
    40
    Thanks
    2
    Thanked 17 Times in 7 Posts

    What is this UPS part?

    What is the circular thing to the right and is it safe to open? I assume transformer coil but not sure. The middle has a hard substance with a tube in the middle and a screw was holding it from both sides. Is there a good way to disassemble this? Is it safe? I dont want to cut or chop into this thing if there is a chance it is hazardous. Thanks.


    Last edited by robaz; 07-10-2018 at 08:12 PM.

  2. #2
    PartTimeScrapper's Avatar
    SMF Badges of Honor



    Member since
    Aug 2011
    Location
    Morrison, Colorado
    Posts
    3,392
    Thanks
    993
    Thanked 3,243 Times in 1,327 Posts
    It is a transformer coil. If you took the batteries out you should be ok to start snipping and tearing it apart I would think.

  3. The Following 2 Users say Thank You for This Post by PartTimeScrapper:


  4. #3
    robaz started this thread.
    robaz's Avatar
    SMF Badges of Honor

    Member since
    Jan 2018
    Location
    Arizona
    Posts
    40
    Thanks
    2
    Thanked 17 Times in 7 Posts
    Quote Originally Posted by PartTimeScrapper View Post
    It is a transformer coil. If you took the batteries out you should be ok to start snipping and tearing it apart I would think.
    So is the stuff in the middle toxic in any way? It is very solid and looks almost like ceramic or glass. I have never seen one like this in an UPS.

  5. #4
    mikeinreco's Avatar
    SMF Badges of Honor



    Member since
    Dec 2011
    Location
    TENNESSEE
    Posts
    4,978
    Thanks
    1,244
    Thanked 4,986 Times in 2,334 Posts
    Everything you want to know

    https://en.wikipedia.org/wiki/Ferrite_core

  6. The Following User Says Thank You to mikeinreco for This Post:


  7. #5
    robaz started this thread.
    robaz's Avatar
    SMF Badges of Honor

    Member since
    Jan 2018
    Location
    Arizona
    Posts
    40
    Thanks
    2
    Thanked 17 Times in 7 Posts
    Quote Originally Posted by mikeinreco View Post
    Everything you want to know

    https://en.wikipedia.org/wiki/Ferrite_core
    Nope, that is not everything I want to know. I don't see mention in your link of whether or not it is hazardous. If anyone knows how or if I even can safely take that thing apart let me know.

  8. #6
    520 is offline Metal Recycling Entrepreneur
    SMF Badges of Honor


    Member since
    Dec 2017
    Location
    Tucson AZ
    Posts
    361
    Thanks
    305
    Thanked 577 Times in 230 Posts
    Quote Originally Posted by robaz View Post
    Nope, that is not everything I want to know. I don't see mention in your link of whether or not it is hazardous. If anyone knows how or if I even can safely take that thing apart let me know.
    Maybe try Googling something like "Is Ferrite Hazardous?" instead of acting like a entitled little prick expecting others to answer every stupid question you might have.

    But to answer you question yes it is very hazardous and should be encased in concrete and disposed of at a site that handles radio active nuclear waste.

  9. #7
    jimicrk's Avatar
    SMF Badges of Honor



    Member since
    Sep 2013
    Location
    Tennessee
    Posts
    2,804
    Thanks
    2,902
    Thanked 4,796 Times in 1,857 Posts
    Quote Originally Posted by 520 View Post
    Maybe try Googling something like "Is Ferrite Hazardous?" instead of acting like a entitled little prick expecting others to answer every stupid question you might have.

    But to answer you question yes it is very hazardous and should be encased in concrete and disposed of at a site that handles radio active nuclear waste.
    Ok, take a deep breath and count to 10 unless you want to be put on "Taking a vacation" status by the admin. My advice, whether you want it or not, would be to post a spoon fed baby meme or something else that won't get you banned.

    The OP is not asking about the ferrite, he's concerned about the substance that is melted and poured into the center of the component that holds the metal tube used for mounting it.

    To the OP. I've seen a handful of these since I started scrapping and removed the core once to get to the copper. I don't know what it's made of but it was a PITA to take apart and not worth it to me. The few I get now go in the shred pile.

    If I don't know what something is I'll ask here or google it. If I can't find an answer, I throw it in the shred pile and move on.

    You can google How toroidal transformers are made. There are some videos showing how they are made but I didn't see the part where they pour the center for the mounting tube.
    Last edited by jimicrk; 07-11-2018 at 03:49 AM.

  10. The Following 5 Users say Thank You for This Post by jimicrk:


  11. #8
    t00nces2's Avatar
    SMF Badges of Honor



    Member since
    Jul 2014
    Location
    Sarasota, FL
    Posts
    1,710
    Thanks
    1,187
    Thanked 2,349 Times in 962 Posts
    Quote Originally Posted by 520 View Post
    Maybe try Googling something like "Is Ferrite Hazardous?" instead of acting like a entitled little prick expecting others to answer every stupid question you might have.

    But to answer you question yes it is very hazardous and should be encased in concrete and disposed of at a site that handles radio active nuclear waste.
    I have been there and sometimes you just have to hold their hands...

    Quote Originally Posted by robaz View Post
    Nope, that is not everything I want to know. I don't see mention in your link of whether or not it is hazardous. If anyone knows how or if I even can safely take that thing apart let me know.
    Yes, very dangerous.. DO NOT:
    Eat it!
    Hit yourself in the head with it!
    Use it to comb your dogs hair!
    Clean your windshield with it!
    Diaper your baby with it!
    Ride it like a bicycle!
    Give it as an anniversary gift to your wife!
    Use it to bribe a police officer!
    Put it in your eye!
    Play toss with your kids with it!
    Use it as an emergency plug for your boat!
    Use it as a bookmark!
    Use it a a cushion for your grandmother to sit on!
    Use it for a postage stamp!
    Use it as a toothbrush!
    Use it as a substitute for a parachute!
    Use it for removing earwax!
    Drop it on your toe!
    Use it for fishing bait!
    Use it to cook asparagus!
    Use as payment for drugs or prostitution!
    Use it as a telephone (cell or rotary dial)!
    Use as a STOP sign!

  12. The Following User Says Thank You to t00nces2 for This Post:


  13. #9
    mikeinreco's Avatar
    SMF Badges of Honor



    Member since
    Dec 2011
    Location
    TENNESSEE
    Posts
    4,978
    Thanks
    1,244
    Thanked 4,986 Times in 2,334 Posts
    Quote Originally Posted by robaz View Post
    Nope, that is not everything I want to know. I don't see mention in your link of whether or not it is hazardous. If anyone knows how or if I even can safely take that thing apart let me know.
    This was meant to point you in the right direction........from this page there are many links which tell about this type of material.........Honestly what one person considers hazardous others may not......There are people on here that work with chemicals, heavy machinery, large scrap, small scrap, ewaste, refrigerant, etc etc and so on and so forth...........All can be hazardous to your health if not handled properly.........This item is the same thing.........it is fairly easy to take apart but can be very time consuming if done by hand......Oh well back into my shell I will go and try not to stir the pot

  14. The Following User Says Thank You to mikeinreco for This Post:

    APA

  15. #10
    RLS0812's Avatar
    SMF Badges of Honor


    Member since
    Feb 2014
    Location
    Clearfield County Pennsylvania
    Posts
    897
    Thanks
    155
    Thanked 633 Times in 358 Posts

    Cool

    It's a T-600 transformer coil ( 2,000 watt ) manufactured by ZeroZone. Used in amplifiers and power supplies.

  16. The Following User Says Thank You to RLS0812 for This Post:


  17. #11
    APA is offline Metal Recycling Entrepreneur
    APA's Avatar
    SMF Badges of Honor


    Member since
    Mar 2016
    Location
    Western Pennsylvania
    Posts
    627
    Thanks
    635
    Thanked 540 Times in 286 Posts
    If you are that worried about it, just leave it alone. The tiny bit of copper in it probably isn’t worth your time. Sell it whole for the best price you can find and take your freed up time to find more scrap.

  18. The Following 2 Users say Thank You for This Post by APA:


  19. #12
    mikeinreco's Avatar
    SMF Badges of Honor



    Member since
    Dec 2011
    Location
    TENNESSEE
    Posts
    4,978
    Thanks
    1,244
    Thanked 4,986 Times in 2,334 Posts
    I see the natives are restless....it is not really dangerous unless eaten or inhaled in large quanity....if anyone can think of any other reason it would be dangerous let me know ty

  20. #13
    PartTimeScrapper's Avatar
    SMF Badges of Honor



    Member since
    Aug 2011
    Location
    Morrison, Colorado
    Posts
    3,392
    Thanks
    993
    Thanked 3,243 Times in 1,327 Posts
    SELL IT WHOLE WITH THE REST OF YOUR TRANSFORMERS!!! Not worth the time to take it apart.

  21. The Following 3 Users say Thank You for This Post by PartTimeScrapper:


  22. #14
    robaz started this thread.
    robaz's Avatar
    SMF Badges of Honor

    Member since
    Jan 2018
    Location
    Arizona
    Posts
    40
    Thanks
    2
    Thanked 17 Times in 7 Posts
    Thanks to those who posted civil comments, I will just get rid of it. I am new to scrapping and just wanted to know from the experienced members if I should mess with it. The consensus seems to be it's not worth it. Fair bit of hostility in this place, noobs have to take their knocks I guess.

  23. #15
    RLS0812's Avatar
    SMF Badges of Honor


    Member since
    Feb 2014
    Location
    Clearfield County Pennsylvania
    Posts
    897
    Thanks
    155
    Thanked 633 Times in 358 Posts
    Just a note - if you can properly test it, you have a $20+ part there.

  24. The Following User Says Thank You to RLS0812 for This Post:


  25. #16
    hobo finds's Avatar
    SMF Badges of Honor


    Member since
    Nov 2010
    Location
    tucson, az
    Posts
    4,756
    Thanks
    6,022
    Thanked 5,902 Times in 2,551 Posts
    Better than the dump!

  26. The Following User Says Thank You to hobo finds for This Post:

    APA

  27. #17
    Kalvlin's Avatar
    SMF Badges of Honor

    Member since
    Dec 2013
    Location
    CT
    Posts
    318
    Thanks
    595
    Thanked 322 Times in 179 Posts
    aaaaaaaand bring on the goats
    Remember... wherever you go... there you are

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook