Results 1 to 17 of 17

Grain truck for hauling scrap

| Tools and Equipment
  1. #1
    Hillbilly94 started this thread.
    Hillbilly94's Avatar
    SMF Badges of Honor


    Member since
    Jan 2019
    Location
    Le Mars, Iowa
    Posts
    43
    Thanks
    17
    Thanked 68 Times in 32 Posts

    Grain truck for hauling scrap

    I'm wondering what your thoughts are on using an older grain truck to haul scrap with. I ended up getting a new job where I'm working day shift instead of nights. The yard I use closes at 4 and a lot of the time I'm off work just in time to get to the yard just before they close. Anywho, the crane operators are gone when I get there and I end up having to unload by hand (typically 4,000 pounds worth per load). So I had the idea of either buying a dump trailer (real easy unloading but real expensive) or I could buy an old grain truck (super easy unloading and a dime a dozen around here).

    I'm looking at a 1976 Ford f600 single axle grain truck with a gvw of around 19,000 pounds and a 1973 Chevy c65 tandem axle with a gvw of 27,500 pounds. I don't remember the length of the box on the Ford, but the Chevy has a 22 foot box. Both have gas v8 engines, 4 or 5 speed manual transmissions and 2 speed axles. Both trucks have hoists and I would be able to haul anywhere between 5 tons and 9 tons of shred in a single load. I already have a class b CDL so I'm covered for that.

    Let me know your thoughts/opinions and ideas for this.
    If you don't believe in something, you'll fall for anything. I believe everything happens for a reason. If you are strong from within, you can will anything. -Eric Davis


  2. #2
    SMF Badges of Honor


    Member since
    Jun 2017
    Location
    Las Vegas
    Posts
    1,306
    Thanks
    3,232
    Thanked 1,922 Times in 785 Posts
    It would work like dumping out a roll-off at the yard without the rolling off option too. High height to load depending on what you have available is my only thought. Otherwise sounds plausible.

  3. #3
    SMF Badges of Honor



    Member since
    Apr 2015
    Posts
    2,071
    Thanks
    615
    Thanked 2,443 Times in 1,090 Posts
    First hand experience the grain box don't lift high enough to tip scrap out, why you ask. Well grain is like BB's that roll out easy.
    Last edited by alloy2; 08-22-2020 at 11:30 PM.

  4. The Following 2 Users say Thank You for This Post by alloy2:


  5. #4
    hills's Avatar
    SMF Badges of Honor



    Member since
    Sep 2017
    Location
    Maine
    Posts
    1,351
    Thanks
    797
    Thanked 1,276 Times in 721 Posts
    I'm thinking cost of ownership.

    The Ford probably uses something like a 235 /80r 22.5. A set of tires would be somewhere around 3,600.00 $

    Fuel mileage is prolly 8 mpg. Maybe 180.00$ at the gas station to fill up if it's got dual tanks ?

    All in all you could have 8 - 10 grand invested just to make it road worthy. None the less ... it's still a 45 year old truck.

    It might be better to go with the dump trailer. You can get one brand new for roughly 7,600.00 $

  6. The Following User Says Thank You to hills for This Post:


  7. #5
    Hillbilly94 started this thread.
    Hillbilly94's Avatar
    SMF Badges of Honor


    Member since
    Jan 2019
    Location
    Le Mars, Iowa
    Posts
    43
    Thanks
    17
    Thanked 68 Times in 32 Posts
    Quote Originally Posted by alloy2 View Post
    First hand experience the grain box don't life high enough to tip scrap out, why you ask. Well grain is like BB's that roll out easy.
    That's a good point. https://www.bigiron.com/Lots/1973Che...AGrainTruck-10 Here is the Chevy I am thinking about. It doesn't have the 50 degree tilt angle that the roll offs have but it looks steep enough to work.

  8. #6
    Hillbilly94 started this thread.
    Hillbilly94's Avatar
    SMF Badges of Honor


    Member since
    Jan 2019
    Location
    Le Mars, Iowa
    Posts
    43
    Thanks
    17
    Thanked 68 Times in 32 Posts
    Quote Originally Posted by hills View Post
    I'm thinking cost of ownership.

    The Ford probably uses something like a 235 /80r 22.5. A set of tires would be somewhere around 3,600.00 $

    Fuel mileage is prolly 8 mpg. Maybe 180.00$ at the gas station to fill up if it's got dual tanks ?

    All in all you could have 8 - 10 grand invested just to make it road worthy. None the less ... it's still a 45 year old truck.

    It might be better to go with the dump trailer. You can get one brand new for roughly 7,600.00 $
    Both trucks have 20 inch wheels. I believe the Ford has a single gas tank while the Chevy has dual gas tanks. I believe I can get the Ford for $1,200 and it's got decent tires on it. Hopefully I would be able to get the Chevy for around the same amount but it would need tires. I do see what you're saying though. THank you for the input.

  9. #7
    hills's Avatar
    SMF Badges of Honor



    Member since
    Sep 2017
    Location
    Maine
    Posts
    1,351
    Thanks
    797
    Thanked 1,276 Times in 721 Posts
    Quote Originally Posted by Hillbilly94 View Post
    Both trucks have 20 inch wheels. I believe the Ford has a single gas tank while the Chevy has dual gas tanks. I believe I can get the Ford for $1,200 and it's got decent tires on it. Hopefully I would be able to get the Chevy for around the same amount but it would need tires. I do see what you're saying though. THank you for the input.
    It's all good. I just hate to see anyone have to spend more on gear than they're making on the scrap. There's probably a thing saying DOT with a number following afterward on the tire sidewall. That's the DOT date code. It's a good thing to check when you're buying a truck. It's not a good idea to run tires that are over six years old. There's a good chance that any tire over ten will blowout on the highway when under load.

    The other thing to check would be the leaf springs. It's not uncommon to get one or two in the stack that are broken with an older truck. They're kind of a booger to change out .

    Check the frame for stress cracks and so on . Just the usual stuff you would look for when you're doing your walkaround in the A.M.

  10. The Following User Says Thank You to hills for This Post:


  11. #8
    SMF Badges of Honor



    Member since
    Apr 2015
    Posts
    2,071
    Thanks
    615
    Thanked 2,443 Times in 1,090 Posts
    Tags are a joke off road/

  12. #9
    SMF Badges of Honor



    Member since
    Apr 2015
    Posts
    2,071
    Thanks
    615
    Thanked 2,443 Times in 1,090 Posts
    I purchased part of a grain truck from Jack, the frame had been cut and made into a dump trailer, my crane truck was plumbed with auxiliary hydraulics.

    Hated that thing and gave it back to Jack.

  13. #10
    SMF Badges of Honor



    Member since
    Apr 2015
    Posts
    2,071
    Thanks
    615
    Thanked 2,443 Times in 1,090 Posts
    If that 1976 Ford f600 has the widow maker rims ya won't find a tire shop that will fix a flat or even install a brand new tire.

    What I got from the description in the Chevy c65 tandem axle, not a true tandem, but a tag axle.

    Tags are a JOKE.

    Last edited by alloy2; 08-22-2020 at 11:42 PM.

  14. #11
    SMF Badges of Honor


    Member since
    Nov 2012
    Location
    Mile HIGH
    Posts
    195
    Thanks
    469
    Thanked 100 Times in 54 Posts
    id go with the trailer ... you can always sell it when you are done with it or pass it down to a family member

  15. The Following User Says Thank You to scrapGAME for This Post:


  16. #12
    matador's Avatar
    SMF Badges of Honor

    We purchase laptop computers and many components for greater than scrap value. We offer a shipping reimbursement program.replies

    Member since
    Nov 2013
    Location
    Big Wonderful Wyoming
    Posts
    2,310
    Thanks
    1,813
    Thanked 3,204 Times in 1,450 Posts
    Good luck even finding a 10.00-20 tire anymore. You might as well plan on converting it to 22.5 or 24.5 ones. You can get low profile 22.5 tires a dime a dozen used from the truck salvage yards. They’re about $100 each at ours. But, tires are only part of the equation

    What’s stopped us from getting a grain truck on our farm is that most of them are best to within an inch of their life already. Farm trucks get a reputation for being overloaded, poorly maintained, and run in bad conditions- at least out here. If you can find a good truck, I think you’d be fine. Out here, though, good grain trucks are few and far between
    More than Scrap Value Shipment Tips: http://www.scrapmetalforum.com/scrap...tml#post242349

  17. The Following User Says Thank You to matador for This Post:


  18. #13
    SMF Badges of Honor



    Member since
    Apr 2015
    Posts
    2,071
    Thanks
    615
    Thanked 2,443 Times in 1,090 Posts
    This International 1 ton is more truck than you'll need.


  19. #14
    SMF Badges of Honor



    Member since
    Apr 2015
    Posts
    2,071
    Thanks
    615
    Thanked 2,443 Times in 1,090 Posts
    Four legged garbage disposal, milk, cheese n meat when it refuses to work.


  20. The Following 2 Users say Thank You for This Post by alloy2:


  21. #15
    Hillbilly94 started this thread.
    Hillbilly94's Avatar
    SMF Badges of Honor


    Member since
    Jan 2019
    Location
    Le Mars, Iowa
    Posts
    43
    Thanks
    17
    Thanked 68 Times in 32 Posts
    You guys have great points of view. I am looking into dump trailers now. Thank you for your thoughts and responses

  22. The Following User Says Thank You to Hillbilly94 for This Post:


  23. #16
    Patriot76's Avatar
    SMF Badges of Honor


    Member since
    Dec 2012
    Location
    Buffalo Commons
    Posts
    2,949
    Thanks
    10,589
    Thanked 7,220 Times in 2,256 Posts
    To the question of grain truck or trailer, one you maintain the axles, bed, frame, tires, and hydraulics. The other you can add the engine, another set of brakes, etc. Bottom line, maintenance on the trailer is cheaper than another hauling vehicle when you consider lisc., taxes, and the fact you are already paying for maintenance on another motor.

    IMHO you have by passed the easy and cheap solution to your problem. Once you develop a relationship with your yard you have many options. I have left trailers after hours that they unloaded the next day and all I had to do was pick up the trailer and check when it was convenient. I call ahead and they leave the gate unlocked to allow me to deliver. If I need to pick it up after hours it is the same deal. Just do not forget to lock the gate when you are done or you will loose this privilege. If you doubt their honesty, weigh it before and after. Around here the truck scales will weigh for free if you emphasize you just want to be safe and legal. Just a thought.
    Give back more to this world than we take.

  24. The Following 3 Users say Thank You for This Post by Patriot76:


  25. #17
    SMF Badges of Honor



    Member since
    Apr 2015
    Posts
    2,071
    Thanks
    615
    Thanked 2,443 Times in 1,090 Posts
    Trailers equipped with hydraulic surge brakes best thing since sliced bread.

    Buy a trailer with five wheel lugs



  26. Similar threads on the Scrap Metal Forum

    1. To buy a heavy hauling truck or not to buy
      By scrapdaddyj in forum A Day in the Life of a Scrapper
      Replies: 14
      Last Post: 12-25-2017, 10:00 PM
    2. Ever see anyone hauling scrap in one of these?
      By MetalEarthRecycling in forum Tools and Equipment
      Replies: 32
      Last Post: 09-27-2013, 07:27 PM
    3. Rollback or Truck & trailer? hauling etc
      By justaguy in forum Vehicle Recycling
      Replies: 66
      Last Post: 01-06-2013, 12:19 PM
    4. Hauling scrap
      By wescrapmetal in forum A Day in the Life of a Scrapper
      Replies: 7
      Last Post: 06-02-2012, 11:23 PM

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook