Page 1 of 2 12 LastLast
Results 1 to 20 of 32

Hybrid View

  1. #1
    Rusty Nuts started this thread.
    Rusty Nuts's Avatar
    SMF Badges of Honor


    Member since
    Jan 2011
    Location
    Texas
    Posts
    86
    Thanks
    6
    Thanked 26 Times in 11 Posts

    $35 Harbor Freight Portable Tire Remover

    http://www.harborfreight.com/portabl...ger-34542.html




    I'm not really a big HF fan, but I thought this might be kinda useful. A couple Youtube videos made it look halfway decent.
    I've been eyeing car rims as a cheap source of steel to recycle, but I don't want to put out the cash for a Sawzall right now, and this is about half the price of used Sawzall.

  2. #2
    SMF Badges of Honor


    Member since
    Jan 2011
    Posts
    20
    Thanks
    0
    Thanked 1 Time in 1 Post

    Thats a good idea :)

    The only thing is, whare can we dispose of the tires at? I have seen ALOT of tires laying around in the woods and on the side of back country roads, but whare can we take the ruber? (:

    Thanks and God Bless

  3. #3
    SMF Badges of Honor

    Member since
    Dec 2010
    Location
    Miles City, MT
    Posts
    158
    Thanks
    50
    Thanked 27 Times in 21 Posts
    depending on where you live check with farmers and ranchers. I used to work for a feedlot and we used old tires to hold tarps down that covered the feed. we would get them from the tire shop. maybe you could find one that needs tires

  4. The Following User Says Thank You to j&jscrap for This Post:


  5. #4
    Rusty Nuts started this thread.
    Rusty Nuts's Avatar
    SMF Badges of Honor


    Member since
    Jan 2011
    Location
    Texas
    Posts
    86
    Thanks
    6
    Thanked 26 Times in 11 Posts
    I think there's some gray area....

    Hypothetically- if someone found a stack of illegally dumped wheels and tires, and did a community service by removing part of the trash- the rims- is that a net benefit or a net loss for the community??

    I'd say it's a gain.

    (It'd be nice if the .gov would push for better recycling of certain items, instead of letting them litter the countryside and create huge hazards)

  6. The Following User Says Thank You to Rusty Nuts for This Post:


  7. #5
    SMF Badges of Honor



    Member since
    Jan 2011
    Posts
    1,159
    Thanks
    0
    Thanked 248 Times in 169 Posts
    Imagine if you could get paid for recycling tires.LoL i would have loads and loads ready from all of them that are dumped near me.

  8. #6
    Destructo_d's Avatar
    SMF Badges of Honor


    Member since
    Sep 2010
    Posts
    185
    Thanks
    35
    Thanked 97 Times in 49 Posts
    I just drop tires off after hours at one of the tire shops in town.... there pile is out in the open and not fenced in... drive up and throw them out

  9. #7
    SMF Badges of Honor

    Member since
    Apr 2011
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts
    I Pick up all the tires from the shops in my area then take them to a "New & Used Tires shops" they pay me $10 a Tire, They do not take all of them but most they do find useful. The rest I take to the local recycling center (in my town) they let me dump them there for free... (Find the one guy that for 10 bucks will let you do whatever you want in the yard) One time payment that will go a loooong way =)
    Last edited by Scrapin At Heart; 04-09-2011 at 04:54 PM. Reason: I'm new, give me a break.. =)

  10. #8
    SMF Badges of Honor


    Member since
    Jan 2011
    Location
    Columbus, IN
    Posts
    204
    Thanks
    18
    Thanked 75 Times in 26 Posts
    I scrap cars, they allow the cars to have tires on them, and extras I have around I throw in the truck or under a pile of "stuffing scrap" inside the car.

    Also, I have heard it is legal to take tires to the landfill as long as you take a box knife and cut the sidewall off of the tread portion. My uncle and I did this with tractor tires using a sawzall, and I know of an auto repair shop / auto salvage yard that does this as well... so apparently it is legal here in Indiana.

  11. #9
    jerseyscrapper's Avatar
    SMF Badges of Honor

    Member since
    Dec 2010
    Location
    NJ
    Posts
    129
    Thanks
    5
    Thanked 26 Times in 10 Posts
    i have a company in town that buys used tires from $.50-$8.00 Depending on the condition of the used tire, i have not been there yet i have about 50 tires ranging in size and conditon, waiting for some more and then will give them a shot and see how i make out...

  12. #10
    SMF Badges of Honor


    Member since
    Jan 2011
    Location
    Columbus, IN
    Posts
    204
    Thanks
    18
    Thanked 75 Times in 26 Posts
    Well I went to Harbor Freight today and they didn't have any of the tire changers in stock... was kinda pissed. Went to tractor supply and bought a Larin brand one for $54.99 because Harbor Freight is over 45 minutes away and the TSC is over 1/2 hr away and on the way home... By the time HF would have more in stock, the sale would be over and they'd be back to $54.99 normal price, and I'd have to make a second trip so I figured screw it why bother. Larin is usually better quality anyway. And I needed tires dismounted today and a friend did too, he pitched in $20 toward the tire changer and he will get a lot of use from it too.... I also bought a tire iron/spoon tool while at Harbor Freight ($5.99, my friend already bent it) and an 11 gallon air tank to keep in the truck since I haul junk cars, flat tires make them catch on the trailer sometimes, and I will need the air tank for plenty of other things. The trip wasn't wasted but it was aggravating that they did not have the only sale item I specifically went there for. They didn't even have a display model, like as if they don't normally stock them. And I know of 3 guys that have bought them there before... so yea kinda aggravated. However, I scored another car while I was up there, it actually runs and drives but needs a lot of serious repairs. The lady was at work and couldn't really get away from work to mess with it so she's gonna bring it to me in the morning.


    Jerseyscrapper- I wish I could find a place to buy used tires here... There has to be a market for them because used tires are used to make that rubber mulch thats very expensive to buy but increasingly popular for playgrounds these days... and I'm sure tire rubber has many other recyclable uses....

  13. #11
    jerseyscrapper's Avatar
    SMF Badges of Honor

    Member since
    Dec 2010
    Location
    NJ
    Posts
    129
    Thanks
    5
    Thanked 26 Times in 10 Posts
    Quote Originally Posted by Bigblue12v View Post
    Well I went to Harbor Freight today and they didn't have any of the tire changers in stock... was kinda pissed. Went to tractor supply and bought a Larin brand one for $54.99 because Harbor Freight is over 45 minutes away and the TSC is over 1/2 hr away and on the way home... By the time HF would have more in stock, the sale would be over and they'd be back to $54.99 normal price, and I'd have to make a second trip so I figured screw it why bother. Larin is usually better quality anyway. And I needed tires dismounted today and a friend did too, he pitched in $20 toward the tire changer and he will get a lot of use from it too.... I also bought a tire iron/spoon tool while at Harbor Freight ($5.99, my friend already bent it) and an 11 gallon air tank to keep in the truck since I haul junk cars, flat tires make them catch on the trailer sometimes, and I will need the air tank for plenty of other things. The trip wasn't wasted but it was aggravating that they did not have the only sale item I specifically went there for. They didn't even have a display model, like as if they don't normally stock them. And I know of 3 guys that have bought them there before... so yea kinda aggravated. However, I scored another car while I was up there, it actually runs and drives but needs a lot of serious repairs. The lady was at work and couldn't really get away from work to mess with it so she's gonna bring it to me in the morning.


    Jerseyscrapper- I wish I could find a place to buy used tires here... There has to be a market for them because used tires are used to make that rubber mulch thats very expensive to buy but increasingly popular for playgrounds these days... and I'm sure tire rubber has many other recyclable uses....


    Yeah i actually found the tire guy in C.L they retread them and sell them used again and they use the real bad ones for the playgrounds they mulch them up... still did not go will update when i do.

  14. #12
    SMF Badges of Honor


    Member since
    Jan 2011
    Location
    Columbus, IN
    Posts
    204
    Thanks
    18
    Thanked 75 Times in 26 Posts
    crumbrubber is a website that deals with used tire, you can apparently submit an ad for free for your tires, but to find out what current pricing is, you have to pay $15 for a one time price inquiry, or $1,250 for a one year subscription!!! Something tells me there must be a huge market for them if the subscription to follow market pricing is $3.42 per day!

  15. #13
    SMF Badges of Honor


    Member since
    Jan 2011
    Location
    Columbus, IN
    Posts
    204
    Thanks
    18
    Thanked 75 Times in 26 Posts
    Man I got thinking about this, if I can find a buyer within somewhat reasonable range there could potentially be a huge market for this with great profit margins. I'm sure tire shops would let you take all their junk tires, they are charging $2-5 each for disposal on them, they should be more than happy to give the tires away. If I had large sides on my gooseneck I could haul a great amount of tires (once accumulated) to the buyer and probably bank a great profit with only fuel cost and time invested (plus wear and tear on the rig)

  16. #14
    SMF Badges of Honor


    Member since
    Mar 2011
    Posts
    12
    Thanks
    2
    Thanked 2 Times in 1 Post
    Thanks nice find ... I seem to keep finding alloy wheels with tires on them and I have been taking a large screwdriver and prybar which is a pain. I may add this to my list of future items to buy.

    As far as getting rid of tires call your local landfill. Im in NC and here was told that I can take them to the landfill in small quantities under 5 at a time. Anymore then 5 and I have to fill out paperwork as to where they came.

  17. #15
    c4f5's Avatar
    SMF Badges of Honor


    Member since
    Mar 2011
    Location
    northeast CO
    Posts
    387
    Thanks
    112
    Thanked 149 Times in 89 Posts
    I have one of these Harbor Frieght specials in my shop, and it is fairly handy for the price...beats the heck out of doing them by hand. I did about 30 tires before it came apart. However, with a couple ponds of scrap steel and a little welding, it is much stouter and works well. Do yourself a favor and weld the seams at the base, and wel an iron plate to the top befor you even mount it, and it will work well for up to 16.5" tires.

    As for the tires, I am allowed 4 junk tires inside each junk car.
    Last edited by c4f5; 03-31-2011 at 10:56 PM.

  18. #16
    TJMETALRECYCLERS's Avatar
    SMF Badges of Honor


    Member since
    Feb 2011
    Location
    South Carolina
    Posts
    93
    Thanks
    27
    Thanked 25 Times in 12 Posts
    I have a Tire Store that I work out for him to take my used tires. He charges me $1 ea to take them off the rims, plus $1.50 for "scrap tires", BUT, he pays me for all of my "good used tires".
    I usually have my rims, and some money in my pocket when I leave there.
    All I have to do is drop them off and I go back later on to settle up.
    It is a "WIN WIN" situation for him and me.
    I don't have to worry about the tires and I get what I wanted in the first place.
    Good Luck !!

  19. The Following User Says Thank You to TJMETALRECYCLERS for This Post:


  20. #17
    SMF Badges of Honor



    Member since
    Jan 2011
    Posts
    1,159
    Thanks
    0
    Thanked 248 Times in 169 Posts
    Yeah man getting paid for tires would be awesome lol.I have seen that tool many times at tractor supply but didnt know if it would be worth a crap or not.I just cut them off with a sawzall.Or break them down with the bobcat then take tire tools and get them off of the rim.

  21. #18
    SMF Badges of Honor


    Member since
    Jan 2011
    Location
    Columbus, IN
    Posts
    204
    Thanks
    18
    Thanked 75 Times in 26 Posts
    Focker,
    Had a set of low pros to dismount one day... pretzled the tire changer tool so we sawzalled them off... not the worst way in the world but prefer not to cut up decent tires that maybe can resell, and overall the changer is almost as fast plus no blade wear. I buy the best sawzall blades I have ever used, they are the Lenox Lazer blades, but at $20 for a 5 pack they are expensive!

  22. #19
    SMF Badges of Honor


    Member since
    Nov 2010
    Location
    Boise, ID
    Posts
    2,702
    Thanks
    2,237
    Thanked 2,352 Times in 1,014 Posts
    If a person gets enough cars to be worth it, a commercial tire machine might be the way to go. I've seen them for 500 or less on Craigslist.

  23. #20
    SMF Badges of Honor



    Member since
    Jan 2011
    Posts
    1,159
    Thanks
    0
    Thanked 248 Times in 169 Posts
    Yeah so how is that little changer does it work pretty good.I need to go buy me one if they work ok.

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook