|
|
The real test is if it can pull that skirt off your avatars tushy
I won't be wronged. I won't be insulted. I won't be laid a-hand on. I don't do these things to other people, and I require the same from them.” John Wayne-- The Shootist
NEWBS READ THIS THREAD ABOUT REFINING!!!!
http://www.scrapmetalforum.com/off-t...ning-read.html
Metal Recycling Entrepreneur
|
Originally Posted by hobo finds
It would be tough getting it off anything it's stuck to.
|
good way to keep someone at thier chair for a while.
Please Add Us On FaceBook, PC SCRAPPER Sioux Falls SD
also our Prices are listed here http://pcscrapperS.com
PC Scrappers LLC
623 S LYON ST SUUTE 200Sioux Falls, SD 57104
1-605-271-2616
Scrapper
i keep pinched fingers from dealing with the small HDD magnets, cant imagine having something that big, lol I would probably end up in the ER .. ha ha ha
|
I'm trying not to think about trying to pick up one of those while wearing steel toe shoes.
Metal Recycling Entrepreneur
|
Those could be very useful to those of us that scrap heavy metal items. It gives me an idea how to make a portable magnetic lift to lift things into truck...
|
magnets are awesome but can be very deadly if you do not understand the field strength of the ones your using the cartoon instance were things going flying across the room can be achieved but more likely in our business it would be something close like a screw or nail near by as were playing with it and rips through your hand lol as for your truck brcepurposing that's and electromagnet this one would just stick to your metal and have to use more strength to pull it off but hard drive magnets can achieve this if you use a plate backing and some good glue to attach about 100-150 magnets to which will lift about 250-400lbs depending on if your using the same sized magnets and attach it evenly to the object and lift it that way so when your in the bed of the truck then break the force easily enough by lifting from the corner of the plate. do a few trial and error runs most with glue strong enough to hold when pulled of the object
|
Or get a couple of them and just lift the back end of the truck...
Metal Recycling Entrepreneur
a plate with a hydraulic cylinder might work easy enough
|
Travis, no offense but it's really hard to read your posts without punctuation and spacing. It gives me a headache.
Guys, maybe this would help, we seem to be a hands on type of people, make our own electromagnet. Just a smaller one like at the yards but for the back of the truck.
https://www.google.com/#q=homemade+electromagnet
P & M Recycling - Specializing in E-Waste Recycling.
If you enjoy your freedom, thank a vet.
|
[QUOTE=Mechanic688;183375]Travis, no offense but it's really hard to read your posts without punctuation and spacing. It gives me a headache.
^^^^ YEP^^^^ *1 ^^^^
AMERICAN BORN, AMERICAN BRED! AND I'M PROUD TO BE AN AMERICAN!!!
Metal Recycling Entrepreneur
|
|
my original thought had been to use one of the magnets the same company makes that is a ring. if you change polarity on electronically charging them you have lift and drop. an a frame with electonic winch would give you a lifting platform.
"Reuse, Repurpose, Recycle..." - BC Repurposing Motto
www.bcrepurposing.weebly.com
https://www.facebook.com/bc.repurposing
Metal Recycling Entrepreneur
|
We use a magnetic table in the machine shop to hold metal when we surface grind something.
Its a block of metal 8 x 14 x 4 with a handle on its side.
Its full of magnets & the field projects out the top of the table, grabbing anything metal in its grasp.
The lever rotates some magnets inside the unit. They either act. Or counteract, breaking the magnetic feild.
No good for scrappin though.
There are currently 1 users browsing this thread. (0 members and 1 guests)
|
Browse the Most Recent Threads
On SMF In THIS CATEGORY. 
OR 
|
Posting Permissions
Register To Reply
Bookmarks