Page 1 of 2 12 LastLast
Results 1 to 20 of 21

flat bed or goose neck

| Tools and Equipment
  1. #1
    bigdog72 started this thread.
    bigdog72's Avatar
    SMF Badges of Honor


    Member since
    Dec 2012
    Location
    honey brook PA
    Posts
    274
    Thanks
    14
    Thanked 137 Times in 68 Posts

    flat bed or goose neck

    well with what I want to do, being more with cars and trucks and just generally grow as a scrapper I was considering putting a 5th wheel/ goose neck hitch in my truck, this would result in me getting a trailer to fit the bill. (keep in mind these are future plans, I'm not running out tomorrow and getting anything new). I would also be able to get campers and other trailers that require this hitch and haul heavier loads to the yard. the though crossed my mind that maybe I should just get a flatbed truck to make getting car very easy, I would probably use it for more then just cars since it would have a higher gvw then my pickup. the down side with getting a new truck is more cost. I'll have gas and maintenance that I would have with just another trailer. so I guess what I want to know is what is a better move? what do you guys use? and how hard would it be to put a 5th wheel hitch in my truck haha



  2. #2
    PartTimeScrapper's Avatar
    SMF Badges of Honor



    Member since
    Aug 2011
    Location
    Morrison, Colorado
    Posts
    3,400
    Thanks
    1,004
    Thanked 3,256 Times in 1,335 Posts
    5th wheel hitch is very easy to install. Basicaly your drilling holes threw the bed into the fram then using bolts to secure the rails to the frame. I did mine in about an hour. Only took so long because I had to cut around my bed liner. Still need to get a spray in. Now in my opinion you may want to go the gooseneck route with a flip up ball in the bed. I have both in my truck. If you decide to get a 5th wheel trailer they sell adapters now to fit the gooseneck ball.

  3. #3
    cummins's Avatar
    SMF Badges of Honor


    Member since
    Apr 2013
    Location
    ontario
    Posts
    573
    Thanks
    15
    Thanked 255 Times in 171 Posts
    yea its not hard go to etrailer.com and order a kit for your truck. watch a couple vids on youtube... you can get goose neck hitches that will bolt into your 5th wheel rails. were slowly going all 5th wheel trailers, dump and flat bed. thats my direction anyways. i hate scraping out of the back of my truck....so hard to keep things nice lol, truck box gets beat to sh@t i just missed out on a nice husky 16k slider hitch for 300 bucks

  4. #4
    Mechanic688's Avatar
    SMF Badges of Honor



    Member since
    Mar 2011
    Location
    Warsaw , Ind. In the heart of the lakes, and down the street from the hotel where Al Capone stayed.
    Posts
    9,568
    Thanks
    11,247
    Thanked 10,730 Times in 4,728 Posts
    Keep in mind that there is a big difference between a farmers - a truckers - and a camper 5th wheel.
    Those are all different.

    camper;


    ranch 5th wheel;


    Semi 5 wheel;
    P & M Recycling - Specializing in E-Waste Recycling.
    If you enjoy your freedom, thank a vet.

  5. #5
    1956's Avatar
    SMF Badges of Honor

    Member since
    Jul 2012
    Location
    Fort lauderdale FL The Venice of The USA
    Posts
    642
    Thanks
    399
    Thanked 1,276 Times in 348 Posts

    Trucks and trailers

    I have both the flat bed is 28 feet long and carries a nice load,the flat bed is forty feet long I use that for large bulky items and the tri axle I use for cars and equipment.i get the most use out of the flatbed.
    Attached Images Attached Images     

  6. #6
    Mechanic688's Avatar
    SMF Badges of Honor



    Member since
    Mar 2011
    Location
    Warsaw , Ind. In the heart of the lakes, and down the street from the hotel where Al Capone stayed.
    Posts
    9,568
    Thanks
    11,247
    Thanked 10,730 Times in 4,728 Posts
    Quote Originally Posted by cummins View Post
    yea its not hard go to etrailer.com and order a kit for your truck. watch a couple vids on youtube... you can get goose neck hitches that will bolt into your 5th wheel rails. were slowly going all 5th wheel trailers, dump and flat bed. thats my direction anyways. i hate scraping out of the back of my truck....so hard to keep things nice lol, truck box gets beat to sh@t i just missed out on a nice husky 16k slider hitch for 300 bucks
    Check this out;
    16K E5 Fifth Wheel Hitch 16115 [16115] - $296.96 : The Hitch Store, Trailer Hitches Online

  7. #7
    bigdog72 started this thread.
    bigdog72's Avatar
    SMF Badges of Honor


    Member since
    Dec 2012
    Location
    honey brook PA
    Posts
    274
    Thanks
    14
    Thanked 137 Times in 68 Posts
    now I thought there was a difference with a ball or a slider, would you say the ball is a better way to go? I would like to still use my bed

  8. #8
    bigdog72 started this thread.
    bigdog72's Avatar
    SMF Badges of Honor


    Member since
    Dec 2012
    Location
    honey brook PA
    Posts
    274
    Thanks
    14
    Thanked 137 Times in 68 Posts
    1956; if you were to have one over the other you said you'd take the 5th wheel right? thats what I was thinking I just didn't know if a flat bed would be easier, also did you have to remove the freon from those a/c's?

  9. #9
    Mechanic688's Avatar
    SMF Badges of Honor



    Member since
    Mar 2011
    Location
    Warsaw , Ind. In the heart of the lakes, and down the street from the hotel where Al Capone stayed.
    Posts
    9,568
    Thanks
    11,247
    Thanked 10,730 Times in 4,728 Posts
    Quote Originally Posted by bigdog72 View Post
    now I thought there was a difference with a ball or a slider, would you say the ball is a better way to go? I would like to still use my bed
    The farmers style (ball) recesses down into the bed but the camper style you can pull the center plate to use the bed.
    My older style 5th wheel in my duellie had bars the went over the rear fenders and the actual 5th wheel fastened to it. That way I could pull the 5th wheel and the main bed was opened up for use.

  10. #10
    bigdog72 started this thread.
    bigdog72's Avatar
    SMF Badges of Honor


    Member since
    Dec 2012
    Location
    honey brook PA
    Posts
    274
    Thanks
    14
    Thanked 137 Times in 68 Posts
    thanks mec, guess I have more options to consider haha

  11. #11
    Kochy's Avatar
    SMF Badges of Honor

    Member since
    Jul 2012
    Location
    Sunbury, PA
    Posts
    532
    Thanks
    214
    Thanked 276 Times in 138 Posts
    Dude big dog a gooseneck is gunna really cut ur gas down pulling it. Its gunna drop to like 7 or 8 fully loaded. If I was u I'd wanna get a duramax.

  12. #12
    bigdog72 started this thread.
    bigdog72's Avatar
    SMF Badges of Honor


    Member since
    Dec 2012
    Location
    honey brook PA
    Posts
    274
    Thanks
    14
    Thanked 137 Times in 68 Posts
    well my future plans include getting a 1 ton dually, I'd probably put the 5th wheel in that but we'll see what the future hold, right now I'll get between 11 and 12 when pulling a decent load

  13. #13
    Kochy's Avatar
    SMF Badges of Honor

    Member since
    Jul 2012
    Location
    Sunbury, PA
    Posts
    532
    Thanks
    214
    Thanked 276 Times in 138 Posts
    Oh, that 6.0 even under pressure stays at the same gas mileage? Dang!

  14. #14
    1956's Avatar
    SMF Badges of Honor

    Member since
    Jul 2012
    Location
    Fort lauderdale FL The Venice of The USA
    Posts
    642
    Thanks
    399
    Thanked 1,276 Times in 348 Posts
    Yes two both they fifth wheel is the way to go,yes I remove all freeons that chiller had four large compressors got out around 64 lbs r-22

  15. #15
    SMF Badges of Honor




    Member since
    Mar 2012
    Location
    ks
    Posts
    2,187
    Thanks
    2,513
    Thanked 2,140 Times in 898 Posts
    Why not go with a gooseneck trailer ? With a 2 5/16" ball and if you get a turnover ball, it flips unpside down with no tools in the matter of minutes. I know a true 5th wheel is rated for more with weight, but even with my ball right side up it never seems to be in the road. I've pulled my old man's 30' trailer grossing over 30k without a bit of trouble.
    Alvord iron and salvage
    3rd generation scrapper and dam proud of it

  16. #16
    Mechanic688's Avatar
    SMF Badges of Honor



    Member since
    Mar 2011
    Location
    Warsaw , Ind. In the heart of the lakes, and down the street from the hotel where Al Capone stayed.
    Posts
    9,568
    Thanks
    11,247
    Thanked 10,730 Times in 4,728 Posts
    Dude big dog a gooseneck is gunna really cut ur gas down pulling it. Its gunna drop to like 7 or 8 fully loaded.
    A gooseneck should not change the fuel milage over a bumper pull trailer. Heck your pulling the same weight, just hitched up in a different spot. I will say a gooseneck will handle a lot smoother where a bumper type trailer beats on the back of the truck.

  17. #17
    SMF Badges of Honor


    Member since
    Oct 2011
    Location
    fresno, california
    Posts
    146
    Thanks
    2
    Thanked 41 Times in 26 Posts
    i had a dozen 5th wheel hitches some sliders. some were new and when i looked them up they were selling for 800-1500 new. put em on craigs for 150 a pop and only one guy responded. then he went crazy on me because he wanted all 12 for 150.

  18. #18
    Russell's Avatar
    SMF Badges of Honor

    Member since
    Jan 2012
    Location
    Chicago,Il
    Posts
    815
    Thanks
    495
    Thanked 707 Times in 324 Posts
    Goosenecks are way more to insure.

  19. #19
    SMF Badges of Honor


    Member since
    Nov 2010
    Location
    Boise, ID
    Posts
    2,702
    Thanks
    2,237
    Thanked 2,352 Times in 1,014 Posts
    B&W makes a gooseneck set up that you can add a 5th wheel to. Kinda spendy though.

  20. #20
    bigdog72 started this thread.
    bigdog72's Avatar
    SMF Badges of Honor


    Member since
    Dec 2012
    Location
    honey brook PA
    Posts
    274
    Thanks
    14
    Thanked 137 Times in 68 Posts
    thanks all for the responds I was thinking 5th wheel from the start but just wanted to check, russell said they are more to insure and I guess with a trailer that size, being 20ft+ it would be a good idea to get insurance on it haha


  21. Similar threads on the Scrap Metal Forum

    1. tanning bed
      By hogs in forum Scrap Metal Spots
      Replies: 20
      Last Post: 10-27-2014, 08:43 PM
    2. tanning bed
      By joe00 in forum Scrap Metal Questions and Answers
      Replies: 7
      Last Post: 06-18-2013, 10:15 AM
    3. Bought a brass bed.
      By wavecrazed in forum A Day in the Life of a Scrapper
      Replies: 21
      Last Post: 10-18-2012, 06:12 PM
    4. pick up bed trailer
      By taterjuice in forum Tools and Equipment
      Replies: 27
      Last Post: 06-20-2012, 08:23 PM
    5. Steel bed frame?
      By jessarox in forum Scrap Metal Questions and Answers
      Replies: 2
      Last Post: 04-18-2012, 09:43 PM

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook