Reliable wire stripper?

**mascraps** · 07-25-2012, 10:59 PM

Hey guys looking for a reliable wire stripper, that's under 100 bucks that's actually worth buying, and doesn't require a drill. Anyone have any suggestions any info would,be great- ma scraps

**mascraps** · 07-26-2012, 01:07 AM

No takers?

**Mechanic688** · 07-26-2012, 01:24 AM

Originally Posted by mascraps

No takers?

Some of the guys got these and seemed to work ok with a little tinkering, NEW BLUEROCK

I just seen this one tonite in my search; The 2012 MANUAL CABLE WIRE COPPER SCRAP RECYCLING STRIPPING STRIPPER MACHINE $$$ | eBay

Hope this helps some, here they all are; http://www.ebay.com/sch/i.html?_trks...ipper&_sacat=0

**thirsty** · 07-26-2012, 09:55 AM

Ive been using one like this and so far no problems (I think mine was $80 shipped). I have probably stripped a few hundred pounds of wire ranging from 14 awg to welding cable, etc with no problems. It takes a little bit to get used. I ended up ditching the wire guide with the eyehooks, they are very a very thing gauge metal and would break after a while of running heavier wire through it. I would say it is well worth the investment for myself and has paid for itself numerous times over. I hope this helped, good luck!

MANY EXTRA BLADES Manual Wire Stripper Stripping Machine Copper Scrap Cable Tool | eBay

**submarinepainter** · 07-26-2012, 12:17 PM

NEW BLUEROCK™ Model W-L100 Manual Wire Stripper- Stripping Machine NEW!

I just ordered it! will let you know

**miked** · 07-26-2012, 12:27 PM

There are several threads listed at the bottom of this page that are good to read. The one I started is there also one on homemade stripper so read them as well. Mike.

**Gord** · 07-26-2012, 12:57 PM

I have had good luck with this one

2012 NEW MANUAL STEEL CABLE WIRE STRIPPING STRIPPER MACHINE w/ CRANK ARM -FAST $ | eBay

I no longer use it manually, but use it with a drill. However its weakness is that adjusting for wire thickness is not as easy. I paid $30 and did $93 bucks of wire in about an hour my first time using it. Just my experience

**EcoSafe** · 07-26-2012, 03:59 PM

most strippers I know are not very.....OH waite you said wire strippers , I thought you said wier strippers, never mind.

(sorry couldn't pass that one up ")

**Mechanic688** · 07-26-2012, 05:22 PM

Originally Posted by olddude

most strippers I know are not very.....OH waite you said wire strippers , I thought you said wier strippers, never mind.

(sorry couldn't pass that one up ")

You jump on that one every chance you get,,,

**scrap1025** · 07-26-2012, 08:56 PM

Originally Posted by thirsty

Ive been using one like this and so far no problems (I think mine was $80 shipped). I have probably stripped a few hundred pounds of wire ranging from 14 awg to welding cable, etc with no problems. It takes a little bit to get used. I ended up ditching the wire guide with the eyehooks, they are very a very thing gauge metal and would break after a while of running heavier wire through it. I would say it is well worth the investment for myself and has paid for itself numerous times over. I hope this helped, good luck!

MANY EXTRA BLADES Manual Wire Stripper Stripping Machine Copper Scrap Cable Tool | eBay

That's the same one I bought last week. Havn't been able to take my hands off her yet. She's a hard working stripper.

**mascraps** · 07-26-2012, 09:42 PM

Thanks guys but still not sure which one to pick!! I'm using it for extension cords, etc

**miked** · 07-27-2012, 09:11 AM

Have you looked at the thread where you make you own out of a 2 X 4 and sharpened drywall screws? Seems to work well on stranded type wires. Not to mention its cheap, Mike.

**mhlyons** · 07-27-2012, 10:26 AM

Originally Posted by miked

Have you looked at the thread where you make you own out of a 2 X 4 and sharpened drywall screws? Seems to work well on stranded type wires. Not to mention its cheap, Mike.

I have been looking for that thread where did you find it. Tried search now just going thru posts lol