Page 1 of 2 12 LastLast
Results 1 to 20 of 23

What to do with old phone(s)???

| Telecom Recycling - Cell phones, tablets, PDAs etc
  1. #1
    Ticonderoga started this thread.
    Ticonderoga's Avatar
    SMF Badges of Honor

    Member since
    Sep 2011
    Posts
    128
    Thanks
    1
    Thanked 88 Times in 38 Posts

    Question What to do with old phone(s)???

    I purchased a bunch of network switches back in December. At the same auction was a lot of Nortel phones and the backbone for them. For the price I couldn't pass it up. Have since then parted out or scrapped the phone servers. However, I still have almost 2 gaylord boxes of phones. Any idea what to do with them? Breaking them down results in a small board, some screws, all the keys, and the rest is rigid plastic. I've thought about selling the keys online for crafts. But not really much money in it for the effort it takes. Looked at selling the lot on ebay but shipping would eat me alive for what they would bring. What is everyone's thoughts?

    Thanks


  2. #2
    RLS0812's Avatar
    SMF Badges of Honor

    Member since
    Feb 2014
    Location
    Bucks County Pennsylvania
    Posts
    895
    Thanks
    155
    Thanked 633 Times in 358 Posts
    Cords are ~$0.25 /lb, gold plug ends are ~ $0.32 /lb.

    Is there gold plating under the solder mask of the controller boards ? If so, Ebay the boards for the best possible price per /lb

  3. The Following User Says Thank You to RLS0812 for This Post:


  4. #3
    SMF Badges of Honor


    Member since
    Jun 2017
    Location
    Las Vegas
    Posts
    1,306
    Thanks
    3,232
    Thanked 1,922 Times in 785 Posts
    Do they work? If so resale is the way to go even as a big lot. Freight shipping reduces the costs dramatically, under $.20/lb you can plan on unless you're shipping all the way across the country. There is a buyer in the buyer/seller section that can organize the freight shipping for you. Otherwise as scrap the board should get you somewhere in the mid grade range depending ($1-2/lb more or less). Leaves a lot of plastic to recycle unfortunately after that.

  5. The Following 2 Users say Thank You for This Post by JJinLV:


  6. #4
    Stargate1's Avatar
    SMF Badges of Honor

    Member since
    Aug 2016
    Location
    Loganville, GA
    Posts
    148
    Thanks
    24
    Thanked 116 Times in 59 Posts
    I typically try to test them at a basic level. Then I try to sell them on eBay. If they don't sell within the time frame I allot, then I just break them down gradually when I don't want to work on anything else. Unfortunately, my trash company has changed their rules on what goes in recycling. If it's not a bottle, box, or can - they don't take it. They just leave the whole dang 96-gallon bin there un-emptied and you have to worry about disposing of it. Really sucks. They won't even take clean computer towers for the steel at which they are.

  7. #5
    RLS0812's Avatar
    SMF Badges of Honor

    Member since
    Feb 2014
    Location
    Bucks County Pennsylvania
    Posts
    895
    Thanks
    155
    Thanked 633 Times in 358 Posts
    Quote Originally Posted by Stargate1 View Post
    [...]Unfortunately, my trash company has changed their rules on what goes in recycling. If it's not a bottle, box, or can - they don't take it. They just leave the whole dang 96-gallon bin there un-emptied and you have to worry about disposing of it. Really sucks.[...]
    I have to take my plastic to an older gentleman in upper West Virginia 2 or so times a year.
    Recycling plastic is getting harder and harder as time goes on.

    If you had literally tons of sorted plastics, I knew of a company in Florida that would take it, however I do not think they exist anymore

  8. The Following User Says Thank You to RLS0812 for This Post:


  9. #6
    406Refining's Avatar
    SMF Badges of Honor



    Member since
    Apr 2017
    Location
    Billings, MT
    Posts
    253
    Thanks
    317
    Thanked 397 Times in 148 Posts
    Quote Originally Posted by Stargate1 View Post
    Unfortunately, my trash company has changed their rules on what goes in recycling. If it's not a bottle, box, or can - they don't take it. They just leave the whole dang 96-gallon bin there un-emptied and you have to worry about disposing of it. Really sucks. They won't even take clean computer towers for the steel at which they are.
    In my area the state now considers plastic to be solid waste for both businesses and residential due to the recycled plastic market disappearing. Several recycle centers in the area have also stopped accepting #1 and #2 plastics which they previously got for free. If it isn't even profitable to get it for free the maket must be quite bad.

  10. The Following User Says Thank You to 406Refining for This Post:


  11. #7
    hobo finds's Avatar
    SMF Badges of Honor


    Member since
    Nov 2010
    Location
    tucson, az
    Posts
    4,746
    Thanks
    6,035
    Thanked 5,906 Times in 2,555 Posts
    Quote Originally Posted by Ticonderoga View Post
    I purchased a bunch of network switches back in December. At the same auction was a lot of Nortel phones and the backbone for them. For the price I couldn't pass it up. Have since then parted out or scrapped the phone servers. However, I still have almost 2 gaylord boxes of phones. Any idea what to do with them? Breaking them down results in a small board, some screws, all the keys, and the rest is rigid plastic. I've thought about selling the keys online for crafts. But not really much money in it for the effort it takes. Looked at selling the lot on ebay but shipping would eat me alive for what they would bring. What is everyone's thoughts?

    Thanks
    will yards by you buy them as shred? sell and be done move on to next project
    Better than the dump!

  12. The Following 2 Users say Thank You for This Post by hobo finds:


  13. #8
    SMF Badges of Honor


    Member since
    Jun 2017
    Location
    Las Vegas
    Posts
    1,306
    Thanks
    3,232
    Thanked 1,922 Times in 785 Posts
    Most recycling firms around Las Vegas also stopped taking plastic after the new National Sword policies went into effect, even if totally clean.


  14. #9
    Sirscrapalot's Avatar
    SMF Badges of Honor


    Member since
    Mar 2012
    Location
    A sandbar off the atlantic..OBX,NC
    Posts
    6,123
    Thanks
    11,885
    Thanked 8,783 Times in 3,854 Posts
    I could get tons of plastic.

    I got thrift stores that woudl give me tons of tv's by the pallet. Far more of a pain in the ass then I'm willing to endure though.

    I like money but I like working smarter more. I paid my dues with TVs. I'm ok never doing another.

    an yes...I must echo Hobo...why would you give away the towers to the trash guys? Stack'm up till you get enough an take'm to the yard. They add up very fast.

    Towers usually pay for the ice in the cooler. The good stuff pays for the beverages.

    I don't drink cheap crap unless it's free. :P

    Sirscrapalot - I'm an expensive date when it comes to beverages.

  15. The Following User Says Thank You to Sirscrapalot for This Post:


  16. #10
    RLS0812's Avatar
    SMF Badges of Honor

    Member since
    Feb 2014
    Location
    Bucks County Pennsylvania
    Posts
    895
    Thanks
    155
    Thanked 633 Times in 358 Posts
    Quote Originally Posted by JJinLV View Post
    [...] even if totally clean.
    If the plastic is clean, you could buy a granulator and pelletizer ... on Ebay, pellets go for $0.60 to $5.00 /lb
    https://www.ebay.com/bhp/plastic-resin-pellets

    According to Google, the setup would cost about $160,000 to $250,000 for a small operation. Used, the equipment would run around $90,000 - $120,000 or so.

  17. The Following User Says Thank You to RLS0812 for This Post:


  18. #11
    HipoGear's Avatar
    SMF Badges of Honor


    Member since
    May 2015
    Location
    Rochester, NY
    Posts
    734
    Thanks
    2,048
    Thanked 945 Times in 409 Posts
    Keep in mind that every phone and handset likely has a couple ounces of lead too. I have about 150 phones to break down still. Not excited to do it which is why I still have them all. Like you, i got them at an auction at a arice that was too good to refuse.
    Copper, brass, and Leather. 3 of my favorite things.

  19. The Following User Says Thank You to HipoGear for This Post:


  20. #12
    jimicrk's Avatar
    SMF Badges of Honor


    Member since
    Sep 2013
    Location
    Tennessee
    Posts
    2,825
    Thanks
    2,917
    Thanked 4,838 Times in 1,877 Posts
    Some of those phones have really nice boards in them. The Nortel 7208 and 7316's have very small boards but they are mid grade high at around $2.30 a pound. BTW, it takes 12 of those small boards to make a pound.

  21. The Following 3 Users say Thank You for This Post by jimicrk:


  22. #13
    jimicrk's Avatar
    SMF Badges of Honor


    Member since
    Sep 2013
    Location
    Tennessee
    Posts
    2,825
    Thanks
    2,917
    Thanked 4,838 Times in 1,877 Posts
    Quote Originally Posted by HipoGear View Post
    Keep in mind that every phone and handset likely has a couple ounces of lead too. I have about 150 phones to break down still. Not excited to do it which is why I still have them all. Like you, i got them at an auction at a arice that was too good to refuse.
    Do you know what the model number is on those phones?

  23. #14
    RockIsland94's Avatar
    SMF Badges of Honor

    Member since
    Apr 2018
    Location
    Central Missouri
    Posts
    5
    Thanks
    0
    Thanked 9 Times in 3 Posts
    We're breaking down all of the IP phones we take in right now... for the ~35 seconds it takes to pull them apart, it makes sense. We're able to move the boards for about 2.45, the wire sells as 35% for ~.65, and the earpieces have enough steel in them for weight that they can go into our shred.

  24. The Following 2 Users say Thank You for This Post by RockIsland94:


  25. #15
    Sirscrapalot's Avatar
    SMF Badges of Honor


    Member since
    Mar 2012
    Location
    A sandbar off the atlantic..OBX,NC
    Posts
    6,123
    Thanks
    11,885
    Thanked 8,783 Times in 3,854 Posts
    This won't help in regards to landline phones, but there used to be a buyer for Cell phones whole. Newer and older models. I'll not name them here as I'm not sure I can. Pretty sure their buyer post is still up. If it is though it'll be way at the back of the buyers listing. I know he was active on GRF as of a year or so ago. Located in Florida to.

    This is the landline phone part...Always open your house/office/landline phones. Not all created equally.

    @jimicrk aren't you are resident phone guy expert or am I getting you mixed up with another? I can't remember everyone's niche anymore. I'm either getting old, or need to visit the cooler more often. I blame Hobo. It's hard keeping up with all the goats, my quotes, an the craziness of my little band of crazy Cooler Pullers.

    An if you do break'm down. Give us some pics an make yourself loved on the forum.

    We like pictures. A lot.

    Sirscrapalot - ooooooooooo laaaaaaaaaaaaaayyy heeeeee whoooo - Don't ask.

  26. The Following User Says Thank You to Sirscrapalot for This Post:


  27. #16
    jimicrk's Avatar
    SMF Badges of Honor


    Member since
    Sep 2013
    Location
    Tennessee
    Posts
    2,825
    Thanks
    2,917
    Thanked 4,838 Times in 1,877 Posts
    Quote Originally Posted by Sirscrapalot View Post
    @jimicrk aren't you our resident phone guy expert or am I getting you mixed up with another? I can't remember everyone's niche anymore. I'm either getting old, or need to visit the cooler more often. I blame Hobo. It's hard keeping up with all the goats, my quotes, an the craziness of my little band of crazy Cooler Pullers.
    Definitely not the resident phone guy. Not my niche. You must be thinking about someone else.

    I specialize in gooble boxes, flooble cranks and blooble yanks.

  28. The Following 4 Users say Thank You for This Post by jimicrk:


  29. #17
    mikeinreco's Avatar
    SMF Badges of Honor


    Member since
    Dec 2011
    Location
    TENNESSEE
    Posts
    4,972
    Thanks
    1,257
    Thanked 5,023 Times in 2,350 Posts
    I bought 2 gaylords once for $5.....were some older rotary dial and newer office phones.....just the brass bells out of the older ones was around $50.....also check ebay for basically everything

  30. The Following User Says Thank You to mikeinreco for This Post:


  31. #18
    Ticonderoga started this thread.
    Ticonderoga's Avatar
    SMF Badges of Honor

    Member since
    Sep 2011
    Posts
    128
    Thanks
    1
    Thanked 88 Times in 38 Posts
    Sell those IP phones if they work. I'm looking for one for example just to test PoE switches.

    Sorry it took so long to reply. Been busy at work. Have a few different version's of the Nortel phones.

    NT7316E Charcoal / T7316 Platinum / M7324 / T7316E Charcoal

  32. #19
    jimicrk's Avatar
    SMF Badges of Honor


    Member since
    Sep 2013
    Location
    Tennessee
    Posts
    2,825
    Thanks
    2,917
    Thanked 4,838 Times in 1,877 Posts
    Would it be possible to sell them on ebay in lots of 10? I see a lot of the 7316 phones in the sold section. They are well made phones and there are still a lot of businesses that have older Nortel systems.
    Another option would be to locate a business in your area that has a Nortel system and sell the phones to them. A more difficult option, but not impossible.
    You could always just scrap them. Those Nortel phones have less screws than most phones and are easy to scrap. Don't forget the display board. Take the handset cords and the station cords and put them with your insulated cable.
    If you do scrap them I hope you have a place to take the plastic because you're going to have 2 gaylords when you get done.

  33. The Following 2 Users say Thank You for This Post by jimicrk:


  34. #20
    Ticonderoga started this thread.
    Ticonderoga's Avatar
    SMF Badges of Honor

    Member since
    Sep 2011
    Posts
    128
    Thanks
    1
    Thanked 88 Times in 38 Posts
    Ya - the plastic is a problem. No one around here takes it. I've even researched plastic recycling. Thanks for the advice. It's all still sitting in storage for now till I get around to messing with it. Making more money selling the switches I purchased at the same time as the phones.

  35. The Following User Says Thank You to Ticonderoga for This Post:



  36. Similar threads on the Scrap Metal Forum

    1. I Need a Phone App
      By t00nces2 in forum Off Topic Discussions
      Replies: 0
      Last Post: 04-20-2015, 02:16 PM
    2. Anyone still use a flip phone?
      By Rollyrogers33 in forum Off Topic Discussions
      Replies: 17
      Last Post: 07-07-2014, 02:20 AM
    3. SMF on your SMART PHONE
      By admin in forum Scrap Metal Forum News, Announcements, and Rules
      Replies: 38
      Last Post: 04-08-2014, 06:10 PM
    4. Phone call....
      By Mudlucky in forum A Day in the Life of a Scrapper
      Replies: 23
      Last Post: 08-17-2013, 09:35 AM
    5. Looking for a phone
      By GeorgeB in forum General Electronics Recycling
      Replies: 12
      Last Post: 01-03-2012, 02:17 PM

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook