Page 1 of 3 123 LastLast
Results 1 to 20 of 59

asking people for scrap

| Scrap Metal Tips and Advice
  1. #1
    mike1 started this thread.
    mike1's Avatar
    SMF Badges of Honor


    Member since
    Dec 2011
    Location
    Rochester indiana
    Posts
    553
    Thanks
    231
    Thanked 93 Times in 76 Posts

    asking people for scrap

    i went to a couple houses and knocked on the door i had couple of people not anser is this normal even if there are cars in the driveway? but i had three ppl anser so far one said they would keep me in mind if they got some from there job another one said they had a scrap water heater and i said no cause i didnt know if it was worth it is it? i even wrote a list of stuff i take i kno tvs and ac's and pipes and apliances is there anything else thats worth taking apart thats not got alot of steel?



  2. #2
    SMF Badges of Honor


    Member since
    Nov 2011
    Location
    boise, ID
    Posts
    1,605
    Thanks
    469
    Thanked 1,462 Times in 668 Posts
    Water heaters are worth 15 to 20 bucks apiece depending on your tin price. Don't forget to take the brass fittings off first.

  3. The Following User Says Thank You to freonjoe for This Post:


  4. #3
    SMF Badges of Honor


    Member since
    Jan 2012
    Location
    Cincinnati, Ohio
    Posts
    286
    Thanks
    52
    Thanked 138 Times in 86 Posts
    People might not like the intrusion of a door to door "salesman". Also depends on the neighborhood you're in. Maybe print a professional looking flyer and stick it in the door? (not on a car or under the windshield wiper. When those things get wet they make a mess!)

  5. The Following User Says Thank You to IronPirate for This Post:


  6. #4
    Mick's Avatar
    SMF Badges of Honor



    Member since
    Aug 2010
    Location
    Palermo, Me
    Posts
    3,405
    Thanks
    363
    Thanked 3,086 Times in 1,326 Posts
    Honestly, I think you're shooting yourself in the foot. Why go out if you're not going to take what they're offering? Like Joe said, you just said "No" to a twenty dollar bill.
    People may laugh at me, but that's ok. I laugh all the way to the bank.

  7. The Following 6 Users say Thank You for This Post by Mick:


  8. #5
    SMF Badges of Honor


    Member since
    Nov 2010
    Location
    Boise, ID
    Posts
    2,702
    Thanks
    2,237
    Thanked 2,352 Times in 1,014 Posts
    I am baffled why one would take the effort to knock on doors and then not take free metal.

  9. The Following 6 Users say Thank You for This Post by IdahoScrapper:


  10. #6
    mike1 started this thread.
    mike1's Avatar
    SMF Badges of Honor


    Member since
    Dec 2011
    Location
    Rochester indiana
    Posts
    553
    Thanks
    231
    Thanked 93 Times in 76 Posts
    no no its not like that see they said id need a truck to get it out and i have no truck and dont know anyone with a truck dont have a trailer either. what about the anti corrosion node is that copper? and the dip thingy? does it matter if its electric or gas is there a difference? i do have a hack saw maybe i could um cut it into small pieces is there any danger to opening a water heater is it gona burst off from pressure? you see i only have a car that hinders what i can take. the house is not far from where i live i can just carry the pieces back to save gas what about the lime i guess thats y there so heavy.

  11. #7
    mikeinreco's Avatar
    SMF Badges of Honor


    Member since
    Dec 2011
    Location
    TENNESSEE
    Posts
    4,972
    Thanks
    1,257
    Thanked 5,023 Times in 2,350 Posts
    buck up and haul that thing in the trunk of your car or backseat.....Or get a wagon and haul it back to your house.....get creative and make money so u can buy a truck

  12. #8
    Mick's Avatar
    SMF Badges of Honor



    Member since
    Aug 2010
    Location
    Palermo, Me
    Posts
    3,405
    Thanks
    363
    Thanked 3,086 Times in 1,326 Posts
    Quote Originally Posted by mikeinreco View Post
    buck up and haul that thing in the trunk of your car or backseat.....Or get a wagon and haul it back to your house.....get creative and make money so u can buy a truck
    Or a little 4x8 trailer you can pull behind the car. You're already seeing that it'll pay for itself in no time.

  13. #9
    SMF Badges of Honor

    Member since
    Jan 2012
    Posts
    3
    Thanks
    0
    Thanked 4 Times in 1 Post
    wow Maybe with the preshure in it u could sit on it, then break of that dip thingy and ride it home.

  14. The Following 4 Users say Thank You for This Post by scridge:


  15. #10
    GeorgeB's Avatar
    SMF Badges of Honor

    Member since
    Sep 2011
    Location
    Manassas Park, VA
    Posts
    2,919
    Thanks
    462
    Thanked 639 Times in 432 Posts
    Quote Originally Posted by mike1 View Post
    i went to a couple houses and knocked on the door i had couple of people not anser is this normal even if there are cars in the driveway? but i had three ppl anser so far one said they would keep me in mind if they got some from there job another one said they had a scrap water heater and i said no cause i didnt know if it was worth it is it? i even wrote a list of stuff i take i kno tvs and ac's and pipes and apliances is there anything else thats worth taking apart thats not got alot of steel?
    Quote Originally Posted by mike1 View Post
    no no its not like that see they said id need a truck to get it out and i have no truck and dont know anyone with a truck dont have a trailer either. what about the anti corrosion node is that copper? and the dip thingy? does it matter if its electric or gas is there a difference? i do have a hack saw maybe i could um cut it into small pieces is there any danger to opening a water heater is it gona burst off from pressure? you see i only have a car that hinders what i can take. the house is not far from where i live i can just carry the pieces back to save gas what about the lime i guess thats y there so heavy.
    If you cannot afford even a small pickup and no trailer, you are better off sticking with non ferrous for the time being.
    George Beale - Founder & President - info@viprecyclingjunkremoval.com
    VIP Recycling Junk Removal LLC - Premier Scrap Metal, Junk, & Electronic Recyclers!
    http://www.viprecyclingjunkremoval.com

  16. The Following User Says Thank You to GeorgeB for This Post:


  17. #11
    corycouch's Avatar
    SMF Badges of Honor


    Member since
    Dec 2011
    Location
    jonesboro ar
    Posts
    1,405
    Thanks
    3,766
    Thanked 1,988 Times in 746 Posts
    the house is not far from where i live i can just carry the pieces back to save gas what about the lime i guess thats y there so heavy.

    i hate to state the obvious, its round you can roll it home

  18. The Following User Says Thank You to corycouch for This Post:


  19. #12
    KzScrapper's Avatar
    SMF Badges of Honor


    Member since
    Apr 2011
    Location
    Denver Metro, CO
    Posts
    4,841
    Thanks
    7,019
    Thanked 5,792 Times in 2,417 Posts
    Quote Originally Posted by corycouch View Post
    its round you can roll it home
    If they got two you could make a Fred Flintstone car.
    Recyclable Material Merchant Wholesaler
    Certified Zip-Tie Mechanic
    "Give them enough so they can do something with it, but not too much that they won't do nothing."

  20. The Following 8 Users say Thank You for This Post by KzScrapper:


  21. #13
    corycouch's Avatar
    SMF Badges of Honor


    Member since
    Dec 2011
    Location
    jonesboro ar
    Posts
    1,405
    Thanks
    3,766
    Thanked 1,988 Times in 746 Posts
    tie some bed rails to them lol

    edit i meant zip tie

  22. The Following 2 Users say Thank You for This Post by corycouch:


  23. #14
    Mechanic688's Avatar
    SMF Badges of Honor



    Member since
    Mar 2011
    Location
    Warsaw , Ind. In the heart of the lakes, and down the street from the hotel where Al Capone stayed.
    Posts
    9,568
    Thanks
    11,247
    Thanked 10,730 Times in 4,728 Posts
    but i had three ppl anser so far one said they would keep me in mind if they got some from there job another one said they had a scrap water heater and i said no cause i didn't know if it was worth it is it?
    If your gonna try and cut it into pieces with a hacksaw, you better eat your Wheaties cause your gonna be there quite a while.
    P & M Recycling - Specializing in E-Waste Recycling.
    If you enjoy your freedom, thank a vet.

  24. The Following User Says Thank You to Mechanic688 for This Post:


  25. #15
    skylinejack's Avatar
    SMF Badges of Honor


    Member since
    Jul 2011
    Location
    Baton Rouge, La.
    Posts
    827
    Thanks
    1,194
    Thanked 959 Times in 400 Posts
    "dip thingy?"

    Really? Did you just say, "dip thingy"? Really?
    AMERICAN BORN, AMERICAN BRED! AND I'M PROUD TO BE AN AMERICAN!!!

  26. The Following 2 Users say Thank You for This Post by skylinejack:


  27. #16
    SMF Badges of Honor


    Member since
    Nov 2010
    Location
    Boise, ID
    Posts
    2,702
    Thanks
    2,237
    Thanked 2,352 Times in 1,014 Posts
    no no its not like that see they said id need a truck to get it out and i have no truck and dont know anyone with a truck dont have a trailer either.

    People say a lot of things. Is your car nice, or can you haul scrap with it? If it's the latter, then by all means get some rope or straps and strap it to the roof or shoe horn it inside. I used to have a Nissan mini van and with both bench seats out I could stuff a lotta chit in there. Don't be afraid to make things happen.


    what about the anti corrosion node is that copper?

    http://en.wikipedia.org/wiki/Galvanic_anode


    and the dip thingy?

    The dip tube? Plastic. Unless you're referring to the T&P valve. It will be brass and likely have a copper tube coming off it.


    does it matter if its electric or gas is there a difference?

    Gas might have brass fittings for the gas connection. Otherwise they are similar.


    i do have a hack saw maybe i could um cut it into small pieces is there any danger to opening a water heater is it gona burst off from pressure?

    I have a hard time cutting them up with a sawzall and cutoff wheel. (This was back when I tried to get that bit of solid wire running between the 2 elements. Now I snip what I can get and call it good). You won't get anywhere with a hacksaw. Yes, the pressure will send you to the moon. By all means, be careful.



    you see i only have a car that hinders what i can take. the house is not far from where i live i can just carry the pieces back to save gas what about the lime i guess thats y there so heavy.

    They're heavy because they're metal. Maybe some sediment and water.

  28. #17
    Mechanic688's Avatar
    SMF Badges of Honor



    Member since
    Mar 2011
    Location
    Warsaw , Ind. In the heart of the lakes, and down the street from the hotel where Al Capone stayed.
    Posts
    9,568
    Thanks
    11,247
    Thanked 10,730 Times in 4,728 Posts
    Yes, the pressure will send you to the moon. By all means, be careful.
    If their out of the water circuit then the water lines are unhooked and their would be no pressure left. lol
    "dip thingy?" Really? Did you just say, "dip thingy"? Really?

  29. The Following 3 Users say Thank You for This Post by Mechanic688:


  30. #18
    PartTimeScrapper's Avatar
    SMF Badges of Honor



    Member since
    Aug 2011
    Location
    Morrison, Colorado
    Posts
    3,400
    Thanks
    1,004
    Thanked 3,256 Times in 1,335 Posts
    Did that dude just hit himself int he dip thingy then get pushed over to boot?

  31. #19
    SMF Badges of Honor


    Member since
    Nov 2010
    Location
    Boise, ID
    Posts
    2,702
    Thanks
    2,237
    Thanked 2,352 Times in 1,014 Posts
    Quote Originally Posted by Mechanic688 View Post
    If their out of the water circuit then the water lines are unhooked and their would be no pressure left. lol
    I know. Just having a bit of fun with it.

    Plus I would imagine if they have a scrap water heater, that it's already been pulled and ready to haul away.

  32. #20
    Mechanic688's Avatar
    SMF Badges of Honor



    Member since
    Mar 2011
    Location
    Warsaw , Ind. In the heart of the lakes, and down the street from the hotel where Al Capone stayed.
    Posts
    9,568
    Thanks
    11,247
    Thanked 10,730 Times in 4,728 Posts
    Did that dude just hit himself int he dip thingy then get pushed over to boot?
    And if you look real close as he does it you see a yellow flag go flying, Watch the ref. He got flagged for unsportsmanlike conduct!! roflmao
    Kinda like what mike1 is doing, throw the flag at him.

  33. The Following User Says Thank You to Mechanic688 for This Post:



  34. Similar threads on the Scrap Metal Forum

    1. Why do people that work at the scrap yard steal
      By camdaddy in forum General - Let's talk business
      Replies: 15
      Last Post: 06-02-2013, 07:36 PM
    2. Why do people that work at the scrap yard steal
      By camdaddy in forum General Electronics Recycling
      Replies: 11
      Last Post: 11-10-2012, 02:14 PM
    3. Some people
      By joebob49 in forum Off Topic Discussions
      Replies: 3
      Last Post: 04-04-2012, 08:35 PM
    4. Scrap Drama! Lucky I don't catch these people.
      By ScrapYaHerd in forum Off Topic Discussions
      Replies: 21
      Last Post: 02-19-2012, 05:44 PM
    5. It's People!
      By parrothead in forum Off Topic Discussions
      Replies: 1
      Last Post: 11-03-2011, 07:10 AM

Page 1 of 3 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook