Results 1 to 11 of 11

Battery back up nearly Hossed me!!!!

| Batteries, Capacitors, Heat Sinks
  1. #1
    BRASSCATCHER started this thread.
    BRASSCATCHER's Avatar
    SMF Badges of Honor


    Member since
    Feb 2012
    Posts
    2,476
    Thanks
    3,436
    Thanked 3,965 Times in 1,383 Posts

    Battery back up nearly Hossed me!!!!

    Don't take for granted that because batterys are swollen they still dont hold a charge. While tearing down some rack mount apc backups I recieved a good shock when pulling the wires off the battery terminals. This one had ten small lead acid batts that were all swollen in the housing. Not thinking they could still still have a charge I grabbed the red lead wire with my pliers and zappo....saw the flash before I felt the current. Pliers went across the shop and a mouthfull of expletives soon followed.
    I grabbed the wire near the terminal and must have grabbed a bare part as well. **** things have been sitting for two weeks and took for granted they were all shot.



    After I found my pliers and had a smoke i started to laugh. I realized I was leaning on a stack of these backups that were up to my waste as I was working on the top one, zipper on the metal housing. ALMOST HOSSED myself!!!!
    I won't be wronged. I won't be insulted. I won't be laid a-hand on. I don't do these things to other people, and I require the same from them.” John Wayne-- The Shootist

    NEWBS READ THIS THREAD ABOUT REFINING!!!!
    http://www.scrapmetalforum.com/off-t...ning-read.html

  2. The Following 16 Users say Thank You for This Post by BRASSCATCHER:



  3. #2
    JohnC4X4's Avatar
    SMF Badges of Honor


    Member since
    Apr 2011
    Location
    South East Ma
    Posts
    986
    Thanks
    162
    Thanked 1,127 Times in 514 Posts
    Quote Originally Posted by BRASSCATCHER View Post
    After I found my pliers and had a smoke i started to laugh.
    You had a smoke OR almost went up in smoke?

  4. The Following User Says Thank You to JohnC4X4 for This Post:


  5. #3
    Sirscrapalot's Avatar
    SMF Badges of Honor


    Member since
    Mar 2012
    Location
    A sandbar off the atlantic..OBX,NC
    Posts
    6,123
    Thanks
    11,885
    Thanked 8,783 Times in 3,854 Posts
    A shocking tale that should keep us all cautious.

    Glad your ok, an you didn't completely pull a Hoss. Mrs.BC wouldn't be happy I don't think.

    Sirscrapalot - Chest nuts roasting on a open spark...err..fire..

  6. The Following 2 Users say Thank You for This Post by Sirscrapalot:


  7. #4
    BRASSCATCHER started this thread.
    BRASSCATCHER's Avatar
    SMF Badges of Honor


    Member since
    Feb 2012
    Posts
    2,476
    Thanks
    3,436
    Thanked 3,965 Times in 1,383 Posts
    Quote Originally Posted by Sirscrapalot View Post
    A shocking tale that should keep us all cautious.

    Glad your ok, an you didn't completely pull a Hoss. Mrs.BC wouldn't be happy I don't think.

    Sirscrapalot - Chest nuts roasting on a open spark...err..fire..
    Mrs.BC got three kids out of me, shes been done with me for a while

  8. The Following 5 Users say Thank You for This Post by BRASSCATCHER:


  9. #5
    BroJer's Avatar
    SMF Badges of Honor


    Member since
    Feb 2012
    Location
    Phoenix-West Valley
    Posts
    1,004
    Thanks
    3,210
    Thanked 1,610 Times in 641 Posts
    ummmmmmm uhhhhhhhhhhhhhh bawhahahahahahahahahahahahahaha

    I ain't sayin NUTin

  10. The Following 3 Users say Thank You for This Post by BroJer:


  11. #6
    Gravitar's Avatar
    SMF Badges of Honor



    Member since
    Jul 2012
    Location
    Central Texas
    Posts
    1,086
    Thanks
    1,258
    Thanked 1,431 Times in 525 Posts
    Those rack mount ones must be vicious! Didn't Auminer break his ankle or something from one of those deciding to fall on him?
    Made in China, Recycled in the Republic of Texas!

    "When the mind fails, brute force prevails" - CTSSolutions

  12. The Following User Says Thank You to Gravitar for This Post:


  13. #7
    webuyselltradestuff's Avatar
    SMF Badges of Honor

    Member since
    May 2013
    Location
    Watkinsville, GA
    Posts
    950
    Thanks
    131
    Thanked 1,284 Times in 583 Posts
    rack mount ones weigh a friggin TON...I have had several...most have about 6-8 regular APC batteries or if the slim line ones like 2 that fill the entire thing....pretty **** heavy...that is not even counting the steel casing for the rack mount...yeah if one falls on you, you are going to FEEL it....I get them from my hospital account...

  14. #8
    KzScrapper's Avatar
    SMF Badges of Honor


    Member since
    Apr 2011
    Location
    Denver Metro, CO
    Posts
    4,841
    Thanks
    7,019
    Thanked 5,792 Times in 2,417 Posts
    Hahahahahah...He said "Rack Mount"!
    Recyclable Material Merchant Wholesaler
    Certified Zip-Tie Mechanic
    "Give them enough so they can do something with it, but not too much that they won't do nothing."

  15. The Following 4 Users say Thank You for This Post by KzScrapper:


  16. #9
    Sirscrapalot's Avatar
    SMF Badges of Honor


    Member since
    Mar 2012
    Location
    A sandbar off the atlantic..OBX,NC
    Posts
    6,123
    Thanks
    11,885
    Thanked 8,783 Times in 3,854 Posts
    Quote Originally Posted by KzScrapper View Post
    Hahahahahah...He said "Rack Mount"!


    Sirscrapalot - Heh heh huh heh huh huh heh heh. - Butthead

  17. The Following 3 Users say Thank You for This Post by Sirscrapalot:


  18. #10
    SMF Badges of Honor


    Member since
    Jun 2014
    Location
    Dallas/Fort Worth
    Posts
    75
    Thanks
    7
    Thanked 40 Times in 24 Posts
    I work on those all the time at work. I always just take a flathead and pop the lead off the battery just in case. Those batteries are all wired together, so if one has some charge it will go down the line

  19. The Following User Says Thank You to Jax for This Post:


  20. #11
    auminer's Avatar
    SMF Badges of Honor



    Member since
    Nov 2012
    Location
    Allen, TX
    Posts
    1,233
    Thanks
    579
    Thanked 2,301 Times in 857 Posts
    Quote Originally Posted by Gravitar View Post
    Those rack mount ones must be vicious! Didn't Auminer break his ankle or something from one of those deciding to fall on him?
    It wasn't just one battery backup. It was a server rack with 12 servers AND four battery backups in it. (story & pics here)

    And I'm the Alexander Dumas that tried to hand truck the top-heavy SOB.

    My foot still ain't the same. That foot was already 1/2 size smaller than the left... now it's a full size smaller.

    AND, the darn battery backups tried to shock me during disassembly. Here's the story: http://www.scrapmetalforum.com/off-t...tml#post154903


    It hurts when your ankle bends a server rack...




    One eyed one horned flying purple foot.

    Last edited by auminer; 07-16-2014 at 06:31 PM.
    Out of clutter, find simplicity. --Albert Einstein

  21. The Following 3 Users say Thank You for This Post by auminer:



  22. Similar threads on the Scrap Metal Forum

    1. This thead is a question - Testing battery-powered mower without a battery
      By ilyaz in forum More than Scrap Value
      Replies: 2
      Last Post: 06-06-2014, 01:09 PM
    2. Canada - buy laptop lithion battery,cell phone lithion battery
      By suntechrecycle in forum Scrap Buyers & Sellers
      Replies: 21
      Last Post: 04-12-2014, 03:03 PM
    3. This thread is a serious one - Quality Used Car Battery and Drain Car Battery Scrap In Stock For Sale
      By audreymuriel in forum Introduce yourself
      Replies: 0
      Last Post: 01-14-2014, 04:08 AM
    4. Battery Cables
      By Yunkman in forum A Day in the Life of a Scrapper
      Replies: 8
      Last Post: 01-13-2014, 12:14 AM
    5. Battery vs. Plugin
      By Rollyrogers33 in forum Tools and Equipment
      Replies: 11
      Last Post: 04-30-2012, 09:52 PM

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook