Results 1 to 7 of 7
  1. #1
    ggariepy started this thread.
    ggariepy's Avatar
    SMF Badges of Honor


    Member since
    Jul 2012
    Location
    Southeast Michigan
    Posts
    157
    Thanks
    87
    Thanked 114 Times in 58 Posts

    Smile Gold fingers: even small-time operations can make money

    I just got done auctioning off a really small quantity of "finger board" gold fingers on eBay. Small as in only 50 grams! I wanted to test the market out and just used the handful of cut fingers that I had on hand. I'm going to get $15.27 (less the eBay fee) for what is a very tiny amount of material. I would guesstimate that this is about a dozen PCs worth of gold fingers, maybe a few more, maybe a few less.



    As I've mentioned elsewhere, I cut these off the boards using a regular coping saw, like you would use for fitting trim molding.

    I don't have a fancy electronic scale; the one I've got is the type used by people counting calories on a diet. So I took multiple pics of the material and the scale: both with the scale zeroed out and with the gold fingers in the tray.

    I'm pretty pleased with this. Now I must find a more reliable source of PCs.



    I also auctioned off a 14-piece lot of hard drive magnets which brought me $6.00 not counting the eBay fees or shipping. So the market for those on eBay is pretty good too.

  2. The Following 7 Users say Thank You for This Post by ggariepy:



  3. #2
    jghilino's Avatar
    SMF Badges of Honor

    Buying Specialty Escrap of all kinds, resale grade computer parts

    Member since
    Sep 2012
    Location
    KANSAS CITY
    Posts
    2,672
    Thanks
    1,429
    Thanked 1,453 Times in 919 Posts
    everyone just goes for the fingers. Dont forget to trim off the solid gold plated areas on boards also some of them are even plated solid on both sides. I was taking apart cd rom drives today well i found a board that has some single sided solid plated on it, came out to 0.2 ounce worth, well thats $2 i wouldve missed if i hadnt trimed the board. Cell phone boards and lcd boards have a ton of solid plated on them.

    Im using scissors on the thin boards, using tin snips on the carrds/ thick pcb's.

  4. The Following User Says Thank You to jghilino for This Post:


  5. #3
    SMF Badges of Honor


    Member since
    Jul 2012
    Location
    florida
    Posts
    96
    Thanks
    30
    Thanked 26 Times in 19 Posts
    I would be careful about posting such low weighted items on ebay weighed w/ those type of scales. they may be fine, but it has been my experience they easily become a little off especially in low weights. You don't want bad eBay ratings over something like that or have to deal w/ someone wanting refund for missing grams. Most pawn shops have little cheap electronic scales for 8-12$ that weigh in gms/oz/lbs up to 10-15lbs and good from .1 grm

  6. The Following User Says Thank You to brucie for This Post:


  7. #4
    parrothead's Avatar
    SMF Badges of Honor


    Member since
    Jan 2011
    Location
    Treasure Coast, FL
    Posts
    2,416
    Thanks
    667
    Thanked 2,067 Times in 953 Posts
    Quote Originally Posted by brucie View Post
    I would be careful about posting such low weighted items on ebay weighed w/ those type of scales. they may be fine, but it has been my experience they easily become a little off especially in low weights. You don't want bad eBay ratings over something like that or have to deal w/ someone wanting refund for missing grams. Most pawn shops have little cheap electronic scales for 8-12$ that weigh in gms/oz/lbs up to 10-15lbs and good from .1 grm
    I agree. Take that money and put it towards a postal scale from a buyer on E-bay. Well worth the money.
    "64K should be enough for anybody." - Bill Gates 1981
    http://www.treasurecoastelectronicrecycling.com/

  8. The Following User Says Thank You to parrothead for This Post:


  9. #5
    PartTimeScrapper's Avatar
    SMF Badges of Honor



    Member since
    Aug 2011
    Location
    Morrison, Colorado
    Posts
    3,400
    Thanks
    1,004
    Thanked 3,256 Times in 1,335 Posts
    This one will work just fine for you. I have on just like it. I also baught test weights to make sure it stays accurate.
    0 1g 1000g 1kg Waage Digital Pocket Balance Weighing Mini Scale New | eBay

  10. The Following User Says Thank You to PartTimeScrapper for This Post:


  11. #6
    ggariepy started this thread.
    ggariepy's Avatar
    SMF Badges of Honor


    Member since
    Jul 2012
    Location
    Southeast Michigan
    Posts
    157
    Thanks
    87
    Thanked 114 Times in 58 Posts
    Quote Originally Posted by PartTimeScrapper View Post
    This one will work just fine for you. I have on just like it. I also baught test weights to make sure it stays accurate.
    0 1g 1000g 1kg Waage Digital Pocket Balance Weighing Mini Scale New | eBay
    You sold me. It's on its way to my house. Where did you get the test weights?

    --Geoff

  12. The Following User Says Thank You to ggariepy for This Post:


  13. #7
    wadarbr549's Avatar
    SMF Badges of Honor


    Member since
    May 2013
    Location
    southern ohio
    Posts
    412
    Thanks
    175
    Thanked 505 Times in 204 Posts
    ggariepy,i dont no about test weights but i know the exact weights of a couple items you probably have in your pockets right now.a nickel weighs 5 grams and a dollar bill weighs 1 gram hope this helps

  14. The Following User Says Thank You to wadarbr549 for This Post:



  15. Similar threads on the Scrap Metal Forum

    1. 3 simple things that will make more money.
      By Rusty Nuts in forum General - Let's talk business
      Replies: 17
      Last Post: 07-23-2014, 02:19 AM
    2. new scrapper here would i make money off of this
      By krut in forum Scrap Metal Tips and Advice
      Replies: 5
      Last Post: 04-06-2014, 06:41 PM
    3. how to make more money scrapping
      By ddm7 in forum Scrap Metal Tips and Advice
      Replies: 17
      Last Post: 10-29-2012, 11:00 PM
    4. a way to make some extra money (:
      By luke in forum Off Topic Discussions
      Replies: 5
      Last Post: 08-19-2011, 05:13 AM

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook