Results 1 to 17 of 17
  1. #1
    miked started this thread.
    SMF Badges of Honor



    Member since
    Jul 2011
    Location
    Jacksonville, NC
    Posts
    4,917
    Thanks
    15,632
    Thanked 5,861 Times in 2,713 Posts

    Looking for a personal recommendation for a buyer of gold plated pins

    I have really looked over the different sections and am hopeful this is the correct section to post this thread.

    My wife and I have been collecting gold plated pins from ewaste type scrap for the past several years and have collect 70-80lbs. I would like to find a buyer or contract refiner willing to work with us.

    I live in coastal NC and would prefer a face to face if transferring all or the majority of our pins. Other wise shipping smallish amounts could be worked out.

    I am aware of the gold refining forum but I don't know those people and I feel I do know many of the members here on this forum.

    So if you personally know and trust someone who might be appropriate for my needs please let me know. Using a private message to communicate your recommendation might be best. Thanks to all and 73, Mike


    ps photos are a sample of one of the containers of pins but as you can see a real mix. Mike





    "Profit begins when you buy NOT when you sell." {quote passed down to me from a wise man}

    Now go beat the copper out of something, Miked

  2. The Following 4 Users say Thank You for This Post by miked:



  3. #2
    HipoGear's Avatar
    SMF Badges of Honor


    Member since
    May 2015
    Location
    Rochester, NY
    Posts
    734
    Thanks
    2,048
    Thanked 945 Times in 409 Posts
    70 to 80 pounds ... Holy Pin Plucking, Batman!!!
    I wish this info was more readily available. I'm with you though, I would want to deal in person if at all possible.

  4. The Following User Says Thank You to HipoGear for This Post:


  5. #3
    miked started this thread.
    SMF Badges of Honor



    Member since
    Jul 2011
    Location
    Jacksonville, NC
    Posts
    4,917
    Thanks
    15,632
    Thanked 5,861 Times in 2,713 Posts
    Alloy great video which reinforces my resolve to never get into gold refining. 73, Mike

  6. The Following 2 Users say Thank You for This Post by miked:


  7. #4
    SMF Badges of Honor


    Member since
    Dec 2013
    Location
    eastern kentucky
    Posts
    27
    Thanks
    3
    Thanked 25 Times in 12 Posts
    Man hate to burst your bubble. If you have 70 or 80 pounds and you have them mixed together you have a lot of sorting to do.

    Should have separated them while you were collecting them.

    Just plain full plated gold pins without solder should have been in one container.



    Fully plated pins with solder in another container.

    Pins with plated tips in another container.

    Flash plated pins in another container.

    Mot going to mention magnetic and nonmagnetic pins being separated.

  8. The Following 4 Users say Thank You for This Post by eastky:


  9. #5
    miked started this thread.
    SMF Badges of Honor



    Member since
    Jul 2011
    Location
    Jacksonville, NC
    Posts
    4,917
    Thanks
    15,632
    Thanked 5,861 Times in 2,713 Posts
    eastky, it may be late for me but others can benefit from your input. Mike

  10. #6
    HipoGear's Avatar
    SMF Badges of Honor


    Member since
    May 2015
    Location
    Rochester, NY
    Posts
    734
    Thanks
    2,048
    Thanked 945 Times in 409 Posts
    Interesting video. I used a similar process a few years ago to de-plate some silver plated trays and ended up with three tiny BBs of Ag. In the end I decided it wasn't worth the time and cost of materials.

    Quote Originally Posted by eastky View Post
    Flash plated pins in another container
    How do you tell if something was flash plated?

    Selling those pins in one pound lots on ebay may be the way to go.

  11. The Following User Says Thank You to HipoGear for This Post:


  12. #7
    miked started this thread.
    SMF Badges of Honor



    Member since
    Jul 2011
    Location
    Jacksonville, NC
    Posts
    4,917
    Thanks
    15,632
    Thanked 5,861 Times in 2,713 Posts
    Quote Originally Posted by HipoGear View Post
    Interesting video. I used a similar process a few years ago to de-plate some silver plated trays and ended up with three tiny BBs of Ag. In the end I decided it wasn't worth the time and cost of materials.


    How do you tell if something was flash plated?

    Selling those pins in one pound lots on ebay may be the way to go.
    I seem to recall a member once stating that using a pencil eraser to "rub" off the flash plating would indicate it.

    As to the ebay option that may be the way I go. 73, Mike

  13. The Following 2 Users say Thank You for This Post by miked:


  14. #8
    Scrappah's Avatar
    SMF Badges of Honor



    Member since
    Jun 2014
    Posts
    1,058
    Thanks
    320
    Thanked 1,419 Times in 676 Posts
    Ran the numbers last year and it came up that there was more value in the base metal of the pins. You would probably take a loss on refining.Ebay would be your best bet.

  15. The Following 4 Users say Thank You for This Post by Scrappah:


  16. #9
    CapitalRecovery's Avatar
    SMF Badges of Honor

    Member since
    Aug 2015
    Location
    United States
    Posts
    318
    Thanks
    232
    Thanked 256 Times in 134 Posts
    Hey guys I just check the sold listing on EBay if you still have them. Here is a link to what I found.
    gold plated computer scrap | eBay
    I know this is an older thead but maybe someone could use the info.

  17. The Following User Says Thank You to CapitalRecovery for This Post:


  18. #10
    Sirscrapalot's Avatar
    SMF Badges of Honor


    Member since
    Mar 2012
    Location
    A sandbar off the atlantic..OBX,NC
    Posts
    6,123
    Thanks
    11,885
    Thanked 8,783 Times in 3,854 Posts
    I was going to suggest the same far as eBay if your can't find someone your comfortable working with.

    When it comes to refining, Alloy knows what he's talking about as I know most of you know.

    Might be better off selling on eBay an letting someone else deal with the hassle of separating, refining, etc.

    Sirscrapalot - You've got mail! - That annoying AOL voice.

  19. The Following User Says Thank You to Sirscrapalot for This Post:


  20. #11
    CopperHeadAKA's Avatar
    SMF Badges of Honor


    Member since
    Nov 2015
    Location
    PA
    Posts
    265
    Thanks
    76
    Thanked 323 Times in 127 Posts
    After watching that video ,
    I am completely renewed that when I find 500 pounds of metal
    Aluminum scrap , motors , 5 pounds copper and other finds that I can Consistently find year after year
    and use some of those profits for a Gram of gold and some ounces of silver from Provident Metals
    That The - CORE FROM THE CURB - Hunter Scrapper is the clever one
    I see base scrapping will accumulate Gold & Silver as long as you set your mind to trading base metals
    for PM
    The toxic smells for each procedure in refining will damage your lungs
    Find scrap & sell it to the highest payer ,
    Get your money
    Use some of your $100 from the on the curb scrap
    Basically easy to find
    Then just buy what is listed below

    https://www.providentmetals.com/1-gram-9999-fine-gold-pamp-suisse-bar-with-assay-card.html


    Last edited by CopperHeadAKA; 03-05-2017 at 10:41 PM.
    http://www.scrapmetalforum.com/members/copper-head.html
    Copper Head and CopperHeadAKA (same person)
    I am back to my skill set from the 80's Painting & all that follows it
    I removed myself from the trash company I worked for as of 2 years ago
    I find scrap non the less

  21. #12
    SMF Badges of Honor

    Member since
    Aug 2019
    Posts
    16
    Thanks
    1
    Thanked 4 Times in 3 Posts
    Sorry to revive an old thread we have in house refining and that is what you are going to need to do to find a recycling company that specializes in specialty items your local scrap yard cant help or will pay a fraction of the value. Look up precious metal refiners but beware and be ready for the truth your gonna get no more than 60-70 percent of the golds value minus refining costs, others may say more but its a lie and those are the companies to watch out for, they promise X amount then will pay you half after its said and done if your lucky.

  22. #13
    SMF Badges of Honor

    Member since
    Aug 2019
    Posts
    16
    Thanks
    1
    Thanked 4 Times in 3 Posts
    Value can be from $5 a lb to Over $50 needs to be tested etc.

  23. #14
    mikeinreco's Avatar
    SMF Badges of Honor


    Member since
    Dec 2011
    Location
    TENNESSEE
    Posts
    4,972
    Thanks
    1,257
    Thanked 5,023 Times in 2,350 Posts
    Would be interesting to hear a happy ending to this story

  24. The Following User Says Thank You to mikeinreco for This Post:


  25. #15
    hills's Avatar
    SMF Badges of Honor



    Member since
    Sep 2017
    Location
    Maine
    Posts
    1,351
    Thanks
    797
    Thanked 1,276 Times in 721 Posts
    So much of it is trial & error. You do the work & invest the time and effort. Sometimes it pays off. Sometimes you hit a dead end and have to go on to something else. Sometimes it works for awhile and then plays out.

    It seems like it's the nature of the scrapping business.

  26. The Following 2 Users say Thank You for This Post by hills:


  27. #16
    NewBrunswickRRRguy's Avatar
    SMF Badges of Honor

    Member since
    Oct 2022
    Location
    Fredericton NB Canada
    Posts
    5
    Thanks
    5
    Thanked 3 Times in 3 Posts
    Reading through this forum is really helping me to get an understanding of how I value my time with scrapping... but still you can't value the experience with money, or the knowledge gained, sometimes the collecting and "picking" of things is just cathartic as well.

    I've managed to save up two milk crates so far of high-end motherboards, and even if it wouldn't be worth it economically to depopulate them, I still can't help but feel the itch to do it. There is something so soothing about it for me for some reason and I love looking at all the little resistors and crystal oscillators etc... plus snip snip make feel good principle at work in that cutting things up just seems to stimulate a part of my brain when done right, like when you get a nice grind on a motor and it just falls apart in two perfect pieces.

    Again so grateful for the knowledge in this forum because now when I do get around to it I will be sure to wear a respirator and keep my skin covered, proper washing. Also saving it up and doing it once a year to limit exposure to toxic particles. No one outranks general safety lol

    Lastly another idea I am going to implement as soon as possible as a la "CopperheadAKA" and investing a part of my non-precious revenue into buying up physical bullion so I can still accumulate and diversify my portfolio.. the thought of a physical store of value is really appealing these days.

    Cheers all!
    -Ri


  28. Similar threads on the Scrap Metal Forum

    1. Gold Plated Pins
      By injunjoe in forum General Electronics Recycling
      Replies: 25
      Last Post: 10-12-2015, 08:24 AM
    2. half plated gold pins??
      By jennija in forum General Electronics Recycling
      Replies: 4
      Last Post: 01-03-2014, 02:57 PM

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook