Results 1 to 16 of 16

Shipping a pallet - Anyone have tips or advice?

| Scrap Shipping and Logistics
  1. #1
    ScrappinRed started this thread.
    ScrappinRed's Avatar
    SMF Badges of Honor

    Member since
    Jan 2012
    Location
    texas
    Posts
    709
    Thanks
    319
    Thanked 710 Times in 342 Posts

    Shipping a pallet - Anyone have tips or advice?

    My apologies if this has been addressed already. I have never shipped a pallet... but I want to!



    Is everyone shrink wrapping your boxes to the pallet? If there are just 4 large boxes, one layer, can I just tie them on with rope? What about a cheap tarp completely wrapping the boxes together and then tying it down? I'm just trying to be cost effective and avoid a lot of money in shrink wrap if possible, even using items I already have... but don't want to be cheap and shoot myself in the foot! Also, if you used shrink wrap, where did you purchase it?

    Thanks!
    ~You have to start somewhere to get anywhere~


  2. #2
    MattInTheHat's Avatar
    SMF Badges of Honor


    Member since
    Sep 2012
    Location
    rock hill, sc
    Posts
    1,464
    Thanks
    1,142
    Thanked 1,396 Times in 703 Posts

    Shipping a pallet - Anyone have tips or advice?

    Walmart, Lowes, home depot, etc...
    Currently looking for a job in or related to scrap/recycling. Relocation is possible for the right offer.

  3. The Following User Says Thank You to MattInTheHat for This Post:


  4. #3
    numbers's Avatar
    SMF Badges of Honor

    Member since
    Nov 2011
    Location
    Kansas
    Posts
    167
    Thanks
    1,421
    Thanked 312 Times in 115 Posts
    My local Tru-Value hardware store has the stretch film. You really need to get some. Consider it cheap insurance to keep all of your boxes on the pallet.

  5. #4
    gorven's Avatar
    SMF Badges of Honor


    Member since
    Jun 2012
    Location
    Pennsylvania
    Posts
    402
    Thanks
    911
    Thanked 495 Times in 201 Posts
    Let me say that shrink wrap is the best way to secure your load to the pallet. Matador sent in a pallet with multiboxes tied down with rope and made it ok from WY to OH. My best advice if you use anything other then shrink wrap make triple sure the boxes are secure to the pallet.

  6. The Following 4 Users say Thank You for This Post by gorven:


  7. #5
    SMF Badges of Honor



    Member since
    Jul 2011
    Location
    Jacksonville, NC
    Posts
    4,917
    Thanks
    15,632
    Thanked 5,861 Times in 2,713 Posts
    Shrink wrap is cheap and easy and you will use it again. Mike
    "Profit begins when you buy NOT when you sell." {quote passed down to me from a wise man}

    Now go beat the copper out of something, Miked

  8. The Following User Says Thank You to miked for This Post:


  9. #6
    matador's Avatar
    SMF Badges of Honor

    We purchase laptop computers and many components for greater than scrap value. We offer a shipping reimbursement program.replies

    Member since
    Nov 2013
    Location
    Big Wonderful Wyoming
    Posts
    2,310
    Thanks
    1,813
    Thanked 3,204 Times in 1,450 Posts
    I'll dig up a photo of that pallet. Ropes worked, but I really spent a lot of time securing that.

    I'm working up another pallet to go to Gorven, and I'm doing it a little differently this time. I'll grab a photo of that.

    I'm not aware of any place that sells shrink wrap or gaylord boxes within 150 miles, so you make do with what you have. But, ropes can be used. What I'm doing this time is a little easier, though
    More than Scrap Value Shipment Tips: http://www.scrapmetalforum.com/scrap...tml#post242349

  10. #7
    matador's Avatar
    SMF Badges of Honor

    We purchase laptop computers and many components for greater than scrap value. We offer a shipping reimbursement program.replies

    Member since
    Nov 2013
    Location
    Big Wonderful Wyoming
    Posts
    2,310
    Thanks
    1,813
    Thanked 3,204 Times in 1,450 Posts
    Here is the pallet that I sent out:



    The Priority Mail box was used to send material in to me. Do not use unused Priority Mail boxes for this- that would be illegal. As you can see, I used a lot of ropes on it, but I had over a dozen boxes, and they were of different sizes. If you're boxes are the same size, it should be easier.

    This time, I'm adding wooden sides to the pallet, basically turning it into a large box that I'll fill with my cardboard boxes. I can already tell that it's a lot more stable. I'll get photos of that when I get a chance. I'll still run a couple of ropes around the wooden structure to reinforce it, and tie the bozes down to the pallet with ropes, but it'll basically create a cage for the material.

    It's a lot of trouble to go to, but it works. Gorven is right, though- if you have access to shrink wrap, use it. That stuff really does wonders!

  11. The Following 3 Users say Thank You for This Post by matador:


  12. #8
    ScrapperTrecycling's Avatar
    SMF Badges of Honor

    Member since
    Oct 2014
    Location
    Montana
    Posts
    213
    Thanks
    1,824
    Thanked 435 Times in 148 Posts
    I'm still trying to talk myself into doing a pallet, if only for the experience, but I'm also a long ways from shrink wrap.
    Every time I start having doubts, I pull up matador's photo for inspiration.
    I'm dying to see his next setup! Crafty little fella....

  13. The Following User Says Thank You to ScrapperTrecycling for This Post:


  14. #9
    nutpie's Avatar
    SMF Badges of Honor


    Member since
    Feb 2014
    Location
    maine
    Posts
    441
    Thanks
    379
    Thanked 404 Times in 227 Posts
    I am the inventory manager at my job and I receive and ship pallets loads often. The best shipments we receive are bundled with a bundler or bailer (plastic straps) and straps attached to the pallet. I don't expect you will be doing that. The shipments we receive that are shrink-wrapped almost always received in great condition with the exception of poorly stacked boxes or heavier boxes stacked on top. The next has been boxes wrapped with lots of packing tape, around and around. Probably the cheapest way. I've never received one tied with ropes like matadors' so I have no comment on that. Sounds like it worked though.

    When I ship a pallet load, I ALWAYS ship shrink-wrapped. I've never had a problem with the shipment. I make sure it's absolutely secure, I don't want the business I work for to lose money. I assume you don't want to lose money. It's also called cellophane wrap.
    Last edited by nutpie; 09-25-2015 at 08:09 AM.

  15. The Following 2 Users say Thank You for This Post by nutpie:


  16. #10
    MattInTheHat's Avatar
    SMF Badges of Honor


    Member since
    Sep 2012
    Location
    rock hill, sc
    Posts
    1,464
    Thanks
    1,142
    Thanked 1,396 Times in 703 Posts

    Shipping a pallet - Anyone have tips or advice?

    shrink wrap is also easier to remove at the destination

  17. The Following 2 Users say Thank You for This Post by MattInTheHat:


  18. #11
    SMF Badges of Honor



    Member since
    Jul 2011
    Location
    Jacksonville, NC
    Posts
    4,917
    Thanks
    15,632
    Thanked 5,861 Times in 2,713 Posts
    Shrink wrap is at wal mart, lowes, home depot, and ebay, just the places I've seen it. Mike

  19. The Following User Says Thank You to miked for This Post:


  20. #12
    ScrappinRed started this thread.
    ScrappinRed's Avatar
    SMF Badges of Honor

    Member since
    Jan 2012
    Location
    texas
    Posts
    709
    Thanks
    319
    Thanked 710 Times in 342 Posts
    I knew I'd seen one roped down! I guess it depends on the size, weight, and amount of boxes for sure. I was checking prices for the shrink wrap online and pricing was all over the place. It seems like the best way to go though so I'll pick some up when I get around to packing all my boxes. Thanks all!

  21. The Following User Says Thank You to ScrappinRed for This Post:


  22. #13
    SMF Badges of Honor

    Member since
    Oct 2012
    Location
    Alabama
    Posts
    764
    Thanks
    1,067
    Thanked 1,213 Times in 471 Posts
    I know you have boxes this time, but next time if you have items that you don't want to box, the cardboard pallet box is an alternative. I don't have a picture of mine, but I can get used ones for $5 from a local company. They are the size of a pallet and are nice for things like monitors and scrap laptops that don't need to be individually boxed.

  23. #14
    Thecamokid's Avatar
    SMF Badges of Honor

    Member since
    Jul 2015
    Location
    Vero Beach, FL
    Posts
    85
    Thanks
    73
    Thanked 51 Times in 36 Posts
    I have a local company I get my wrap from, but to all of you who said your known places that sell wrap is over so many miles away, have any of you looked into "u-line"? I have no clue what they charge for a roll or what their shipping is but they will deliver to your front door. then again I guess eBay will too haha, just a thought.

  24. #15
    etack's Avatar
    SMF Badges of Honor
    Buying Tantalum capacitors

    Member since
    Oct 2012
    Location
    United States ohio
    Posts
    503
    Thanks
    443
    Thanked 635 Times in 282 Posts
    First off "DON"T USE ROPE" that is one of the worst pallet secures you can use with the exception of a rope net they work great.

    The stretch wrap is the only way to go for multiple boxes you want to try to make it as much one item as possible. It kills me how clients will ship me thing that cost tens of thousands of dollars in cheep, old, worn-out packaging material, with barely any tape to keep the box closed. Spending .5% on packaging to the value of the continence is OK you will spend more if the pallet falls apart in transit. Also if you do have a lot of boxes you can get a small box of the plastic strapping cheap from Amazon. This works great too.

    Additionally if you don't have a dock or forklift look for a small company around you that dose. I use the feed store by my house to ship from cost me $20.00 a pallet for them to put it on a truck or take it off one. This is by far the best for me the nearest dock is 45 min.

    Eric
    Last edited by etack; 09-25-2015 at 08:05 AM.
    I buy Tantalum Capacitors and offer other services. Check out my thread for more info.

    http://www.scrapmetalforum.com/scrap...-cap-more.html

    http://recycletantalumcapacitors.com/

  25. The Following 2 Users say Thank You for This Post by etack:


  26. #16
    etack's Avatar
    SMF Badges of Honor
    Buying Tantalum capacitors

    Member since
    Oct 2012
    Location
    United States ohio
    Posts
    503
    Thanks
    443
    Thanked 635 Times in 282 Posts
    Quote Originally Posted by matador View Post
    I'll dig up a photo of that pallet. Ropes worked, but I really spent a lot of time securing that.

    I'm working up another pallet to go to Gorven, and I'm doing it a little differently this time. I'll grab a photo of that.

    I'm not aware of any place that sells shrink wrap or gaylord boxes within 150 miles, so you make do with what you have. But, ropes can be used. What I'm doing this time is a little easier, though
    Any Place that wraps pallets will sell you some, the feed store by me would give it to me if I asked its cheep the way they get it and they always have ends laying around too.

    Eric

  27. The Following User Says Thank You to etack for This Post:



  28. Similar threads on the Scrap Metal Forum

    1. Need tips, and advice on trailer scrapping
      By nhquinn in forum General - Let's talk business
      Replies: 4
      Last Post: 09-15-2021, 04:18 PM
    2. Need some urgent cellphone advice and shipping advice
      By mascraps in forum Scrap Metal Tips and Advice
      Replies: 15
      Last Post: 08-26-2012, 08:07 AM
    3. Need Tips and advice on Computer scrap
      By Russryleee in forum Scrap Metal Tips and Advice
      Replies: 6
      Last Post: 01-12-2012, 11:33 AM
    4. Bulk trash day tips and advice
      By Pattyb in forum Scrap Metal Tips and Advice
      Replies: 8
      Last Post: 11-17-2011, 03:43 PM

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook