Page 1 of 2 12 LastLast
Results 1 to 20 of 23

Avoiding Fed Ex overage charges

| Scrap Shipping and Logistics
  1. #1
    billygoat started this thread.
    billygoat's Avatar
    SMF Badges of Honor

    Member since
    Feb 2012
    Location
    Rochester, NY
    Posts
    630
    Thanks
    99
    Thanked 491 Times in 250 Posts

    Avoiding Fed Ex overage charges

    I know Ewasted posted this somewhere at some time and I remember reading it. Unfortunately I didn't quite memorize it. I have done a general search using the advanced search function. Several times. I also searched through his buyer thread back when it was around 42 pages long and could not find it, even using the "find" function in my browser. I'm almost 100% positive he used the term "overage" to describe the extra charge and that was the main keyword I was using in my searches.

    So I have to ask. I know what I want to know, but am struggling to come up with the right words to describe what I'm trying to figure out. So I'll do my best.

    When it comes to box sizes, Fed Ex will charge an overage if the box is too big for its weight classification. This is what I recall from the post I can't find. But what I don't know is the box size maximum I can use to avoid that extra charge. I plan to pick up a box at Walmart that is 18x18x24 but don't know if that would result in an overage.

    Does anyone know what the size limit is for the 65-70 lb maximum weight classification?



  2. #2
    KzScrapper's Avatar
    SMF Badges of Honor


    Member since
    Apr 2011
    Location
    Denver Metro, CO
    Posts
    4,841
    Thanks
    7,019
    Thanked 5,792 Times in 2,417 Posts
    I thinks it's more about what the box is rated for and it should be on a stamp usually found on the bottom of the box. I use Heavy Duty Medium Size from Home Depot and I think they are rated for 80 pounds. They are approximately 18 x 18 x 18.
    Recyclable Material Merchant Wholesaler
    Certified Zip-Tie Mechanic
    "Give them enough so they can do something with it, but not too much that they won't do nothing."

  3. The Following 3 Users say Thank You for This Post by KzScrapper:


  4. #3
    KzScrapper's Avatar
    SMF Badges of Honor


    Member since
    Apr 2011
    Location
    Denver Metro, CO
    Posts
    4,841
    Thanks
    7,019
    Thanked 5,792 Times in 2,417 Posts

  5. #4
    billygoat started this thread.
    billygoat's Avatar
    SMF Badges of Honor

    Member since
    Feb 2012
    Location
    Rochester, NY
    Posts
    630
    Thanks
    99
    Thanked 491 Times in 250 Posts
    Thanks, KZ.

    I know about the box weight ratings listed on the bottom of the box. I do know what corrugated cardboard is.

    But I don't know what Fed Ex's size limits are for certain weight categories, before they tack on extra charges. That's what I'm trying to find out.

  6. #5
    KzScrapper's Avatar
    SMF Badges of Honor


    Member since
    Apr 2011
    Location
    Denver Metro, CO
    Posts
    4,841
    Thanks
    7,019
    Thanked 5,792 Times in 2,417 Posts
    Sorry BG...wasn't trying challenge your intelligence by giving you the definition of corrugated cardboard from Wiki, but rather provide the info about how they figure out how many pounds the box is rated for. All I know is that anything over 70 pounds and the price goes up at least $10.

  7. #6
    billygoat started this thread.
    billygoat's Avatar
    SMF Badges of Honor

    Member since
    Feb 2012
    Location
    Rochester, NY
    Posts
    630
    Thanks
    99
    Thanked 491 Times in 250 Posts
    No problem KZ! I was wondering why you were pointing me to the Wiki page for cardboard.

    Anyway, I got the answer straight from the CFCS. 18x18x24 should be fine and not result in any oversize charges, but anything larger than that might.

  8. #7
    BroJer's Avatar
    SMF Badges of Honor


    Member since
    Feb 2012
    Location
    Phoenix-West Valley
    Posts
    1,004
    Thanks
    3,210
    Thanked 1,610 Times in 641 Posts
    This may have been the post you were looking for.

    But, now I see you have the answer, anywho ;-)

  9. The Following 2 Users say Thank You for This Post by BroJer:


  10. #8
    PartTimeScrapper's Avatar
    SMF Badges of Honor



    Member since
    Aug 2011
    Location
    Morrison, Colorado
    Posts
    3,400
    Thanks
    1,004
    Thanked 3,256 Times in 1,335 Posts
    I know the post office is more than 80 inches in total girth.

  11. #9
    BRASSCATCHER's Avatar
    SMF Badges of Honor


    Member since
    Feb 2012
    Posts
    2,476
    Thanks
    3,436
    Thanked 3,965 Times in 1,383 Posts
    Quote Originally Posted by PartTimeScrapper View Post
    I know the post office is more than 80 inches in total girth.
    What is the formula for measuring "girth"? No offense PTS but that sounds like typical post office ambiguity.
    I love the mail carrier, just not who they work for.
    I won't be wronged. I won't be insulted. I won't be laid a-hand on. I don't do these things to other people, and I require the same from them.” John Wayne-- The Shootist

    NEWBS READ THIS THREAD ABOUT REFINING!!!!
    http://www.scrapmetalforum.com/off-t...ning-read.html

  12. The Following User Says Thank You to BRASSCATCHER for This Post:


  13. #10
    Mechanic688's Avatar
    SMF Badges of Honor



    Member since
    Mar 2011
    Location
    Warsaw , Ind. In the heart of the lakes, and down the street from the hotel where Al Capone stayed.
    Posts
    9,568
    Thanks
    11,247
    Thanked 10,730 Times in 4,728 Posts
    Quote Originally Posted by BRASSCATCHER View Post
    What is the formula for measuring "girth"? No offense PTS but that sounds like typical post office ambiguity.
    I love the mail carrier, just not who they work for.
    Isn't that the total inches around it??
    P & M Recycling - Specializing in E-Waste Recycling.
    If you enjoy your freedom, thank a vet.

  14. #11
    billygoat started this thread.
    billygoat's Avatar
    SMF Badges of Honor

    Member since
    Feb 2012
    Location
    Rochester, NY
    Posts
    630
    Thanks
    99
    Thanked 491 Times in 250 Posts
    Quote Originally Posted by BroJer View Post
    This may have been the post you were looking for.

    But, now I see you have the answer, anywho ;-)
    Yep, that was exactly the post I was looking for. But I would never guess the right keywords in a million years. Thanks for finding it. Going to print that out and keep it in my notebook.

    As it turns out, unfortunately, I can't use the 18x18x24 box. Filling it up will put it over 70 lbs. Ugh!

  15. #12
    KzScrapper's Avatar
    SMF Badges of Honor


    Member since
    Apr 2011
    Location
    Denver Metro, CO
    Posts
    4,841
    Thanks
    7,019
    Thanked 5,792 Times in 2,417 Posts
    If you have reached your target weight and still have room in the box make a cut in each corner down to the level of your boards or whatever, fold the flaps over and cut off the excess, then seal the top as you would normally.

  16. The Following 7 Users say Thank You for This Post by KzScrapper:


  17. #13
    TheRecycleGuy's Avatar
    SMF Badges of Honor

    Member since
    Jun 2013
    Location
    new iberia LA
    Posts
    342
    Thanks
    197
    Thanked 303 Times in 119 Posts
    Quote Originally Posted by billygoat View Post
    No problem KZ! I was wondering why you were pointing me to the Wiki page for cardboard.

    Anyway, I got the answer straight from the CFCS. 18x18x24 should be fine and not result in any oversize charges, but anything larger than that might.
    thank you cause ive ben struggeling with this for days now.. I couldn't fill the 18x18x24 to the top for 64 lbs so I added some chunked styro... thought I should go see if the 20x20 box would be better.. with different size motherboards its a hard puzzle to pack them good I guess unless you spent hours making it better.

  18. #14
    waredu's Avatar
    SMF Badges of Honor

    Member since
    Apr 2012
    Location
    Texas
    Posts
    309
    Thanks
    95
    Thanked 260 Times in 125 Posts
    I think people have dimensional weight misunderstood.

    Fedex will use the higher of actual weight or dimensional weight for calculating shipping charges. See their calculator here FedEx - Dimensional weight calculator

    So, if I have an 18x18x20 box that weighs 69 pounds, I will pay for 69 pounds. But if I have the same size box and it only weighs 30 pounds I will be charged for shipping the dimensional weight of 47 pounds.

    Big, light packages take up room - small, heavy packages take up weight. Their trucks and planes only have so much space and can only carry so much - so they charge you accordingly (does your package take up more weight or more space?).

  19. The Following 3 Users say Thank You for This Post by waredu:


  20. #15
    volvoscrapper's Avatar
    SMF Badges of Honor


    Member since
    Aug 2012
    Location
    New Jersey
    Posts
    209
    Thanks
    289
    Thanked 218 Times in 111 Posts
    Quote Originally Posted by KzScrapper View Post
    If you have reached your target weight and still have room in the box make a cut in each corner down to the level of your boards or whatever, fold the flaps over and cut off the excess, then seal the top as you would normally.
    yes! I lightly score the inside of the box at the level where I plan to fold down my new flaps

  21. #16
    SMF Badges of Honor


    Member since
    Sep 2011
    Posts
    177
    Thanks
    8
    Thanked 153 Times in 70 Posts
    Quote Originally Posted by billygoat View Post
    Yep, that was exactly the post I was looking for. But I would never guess the right keywords in a million years. Thanks for finding it. Going to print that out and keep it in my notebook
    Despite my pointing it out more than once, the search function is not much help if you don't know what the term is you are looking for. People have asked questions and the answer will be "use the search function" as if the individual didn't try that.

    I'm glad that BroJer was able to help you with the search.


    ****************************************

    I do have a question related to searching. The link provided by BroJer takes you to the scrap room which is off limits to non members. Can non members see it with a search? Just wondering if that is part of the disconnect.

    Bill

  22. #17
    SMF Badges of Honor

    Member since
    Apr 2014
    Posts
    4
    Thanks
    0
    Thanked 9 Times in 3 Posts
    Quote Originally Posted by waredu View Post
    I think people have dimensional weight misunderstood.

    Fedex will use the higher of actual weight or dimensional weight for calculating shipping charges. See their calculator here [fedex.com/be/tools/dimweight]FedEx - Dimensional weight calculator[/url]

    So, if I have an 18x18x20 box that weighs 69 pounds, I will pay for 69 pounds. But if I have the same size box and it only weighs 30 pounds I will be charged for shipping the dimensional weight of 47 pounds.

    Big, light packages take up room - small, heavy packages take up weight. Their trucks and planes only have so much space and can only carry so much - so they charge you accordingly (does your package take up more weight or more space?).

    waredu

    Your dimensional calculations are right for international shipments. The divisor for domestic ground and express is slightly higher at 166. So to calculate dimensional weight you multiply L x W x H and divide by 166. This will give you the dimensional weight that your box will be charged. For international shipments the same formula applies but you divide by 139 rather than 166. So for a 18x18x20 box, the dimensional weight would be rated at 40 lbs not 47 lbs.

    If the box is less than 5,184 cubic inches dimensional weight does not apply and the package will rate at actual weight. Dimensional weight applies as soon as the cubic inches exceed 5,184. In 2015 however this will change and FedEx will start applying dimensional weight to every package even if it is under 5,184 cubic inches.

  23. #18
    MattInTheHat's Avatar
    SMF Badges of Honor


    Member since
    Sep 2012
    Location
    rock hill, sc
    Posts
    1,464
    Thanks
    1,142
    Thanked 1,396 Times in 703 Posts
    If you poke around the fedex site enough, you should be able to find a pdf with the info you want. I looked it up about a year ago. it was something to do with adding the length, width, and height.
    Currently looking for a job in or related to scrap/recycling. Relocation is possible for the right offer.

  24. #19
    Evan's Avatar
    SMF Badges of Honor

    Member since
    Apr 2014
    Location
    San Jose, CA
    Posts
    87
    Thanks
    83
    Thanked 101 Times in 42 Posts
    I read online somewhere that you can avoid FedEx overcharges by paying upfront in cash. I've never actually tried it though.

  25. #20
    SMF Badges of Honor

    Member since
    Apr 2014
    Posts
    4
    Thanks
    0
    Thanked 9 Times in 3 Posts
    Quote Originally Posted by Evan View Post
    I read online somewhere that you can avoid FedEx overcharges by paying upfront in cash. I've never actually tried it though.
    Evan

    By paying upfront in cash you will be overpaying drastically for your shipments. If you go into a UPS store or a FedEx Office the rates they use are different than if you have an account with UPS or FedEx. In most cases the rates are almost 30% higher than if you were to open your own account with no discounts. There are 3 different types of rates that UPS and FedEx use.

    - Retail Rates (UPS store and FedEx Office)
    - Daily Shipper Rate (anybody can set up an account online)
    - Negotiated Rates (discounts off of the daily shipper rate)

    It is worth it use your account to ship. Plus UPS and FedEx can either return the package to sender or hold the package for funds if there are excessive overages that need to be collected.

  26. The Following 3 Users say Thank You for This Post by SuppliesGuy:



  27. Similar threads on the Scrap Metal Forum

    1. Does anybody know if pending charges show on background checks
      By camdaddy in forum Off Topic Discussions
      Replies: 15
      Last Post: 08-14-2018, 09:28 AM
    2. Fed Up Newbie
      By cheerio in forum Introduce yourself
      Replies: 5
      Last Post: 07-31-2012, 11:58 AM
    3. Who else charges to pick up appliances?
      By BurlyGuys in forum General - Let's talk business
      Replies: 14
      Last Post: 03-02-2012, 09:11 PM
    4. last rant,I promise. The FED RES. ?
      By EcoSafe in forum Off Topic Discussions
      Replies: 11
      Last Post: 11-21-2011, 01:45 AM

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook