Results 1 to 12 of 12
  1. #1
    ScrapmanIndustries started this thread.
    ScrapmanIndustries's Avatar
    SMF Badges of Honor


    Member since
    Feb 2017
    Location
    Easton, Pa
    Posts
    361
    Thanks
    99
    Thanked 303 Times in 132 Posts

    Processing sealed units Instructional.

    I learned how to do this by looking at some of FreonJoe's stuff and Idahoscrapper. I'm not the first one to use a plasma on these and I'm sure I won't be the first. Since many of you are probably out of work right now Here is an instructional video about how to take apart Ac compressors. If you play the market right you should be able to buy cheap right now and hold on to the copper till prices go back up. I don't have enough room to store nothing and right now the prices I'm getting I would loose money buying these things for more than 5 cents/pound right now but those of you that can store boxes of copper may be able to make out big on these if you start up now.

  2. The Following 2 Users say Thank You for This Post by ScrapmanIndustries:



  3. #2
    SMF Badges of Honor


    Member since
    Mar 2012
    Location
    NY
    Posts
    40
    Thanks
    12
    Thanked 17 Times in 7 Posts
    Does the return match the time and effort?

  4. #3
    ScrapmanIndustries started this thread.
    ScrapmanIndustries's Avatar
    SMF Badges of Honor


    Member since
    Feb 2017
    Location
    Easton, Pa
    Posts
    361
    Thanks
    99
    Thanked 303 Times in 132 Posts
    If you know what you're doing than yes. I used to make $20 an hour or more tearing them up. right now the math doesn't work in my favor. But if your able to get them for the right price than yes. absolutely. before I left for europe a year or so ago I was paying 20 cents per pound for them. then when they were torn apart they were worth on average 26 to 28 cents per pound.

  5. The Following 2 Users say Thank You for This Post by ScrapmanIndustries:


  6. #4
    hills's Avatar
    SMF Badges of Honor



    Member since
    Sep 2017
    Location
    Maine
    Posts
    1,351
    Thanks
    797
    Thanked 1,276 Times in 721 Posts
    Thank you for taking the time to make the video.

    There are probably a couple of things. It's not the best time for any kind of scrapping. It's just the economics of it. It's a thin margin business during the best of times. It's easy for any kind of scrapping to slide into the unprofitable activity category when things aren't so good. The other thing is that it's a fair amount of money invested in equipment to do it this way. If it were used just for this one purpose .... the ROI would be quite a ways off. If you were already geared up then this wouldn't be an issue.

    It's guesswork on copper values. Prices are down at the moment. It appears that there's a fair amount of copper sitting in storage in the warehouses at the moment. The economy is going to have to restart to draw down some of those reserves.

    Maybe a year or two before we start to see a rise ?

    If you are idling right now ... it might not be a bad investment of your time to put some copper up for later. If you're looking for some quick cash to buy the groceries then maybe not so good ?

  7. The Following User Says Thank You to hills for This Post:


  8. #5
    ScrapmanIndustries started this thread.
    ScrapmanIndustries's Avatar
    SMF Badges of Honor


    Member since
    Feb 2017
    Location
    Easton, Pa
    Posts
    361
    Thanks
    99
    Thanked 303 Times in 132 Posts
    Quote Originally Posted by hills View Post

    If you are idling right now ... it might not be a bad investment of your time to put some copper up for later. If you're looking for some quick cash to buy the groceries then maybe not so good ?
    yes. that is pretty much what I was trying to get at. If someone has room for storage maybe now would be a good time to get into it if they can afford to hold it for when prices go back up. unfortunately i'm not one of those people. I just had a few sitting in my truck bed I needed to get rid of. The yard I went to today said they would sell theirs for 17 cents a pound right now. But torn apart with prices the way they are at the moment I can only get 11 cents a pound out of them. So Id have to buy for 6 cents a pound to make quick cash. But if someone were to hold onto the material till prices go back up they could potentially make out better on them. especially if they get a full trailer load of copper saved up. then they could really be making something.

  9. #6
    hills's Avatar
    SMF Badges of Honor



    Member since
    Sep 2017
    Location
    Maine
    Posts
    1,351
    Thanks
    797
    Thanked 1,276 Times in 721 Posts
    Theoretically speaking, maybe consider sourcing them in a different way ? Heaven knows, they're common enough in this area. You can pick them up for little or nothing. I tried my hand at a few just for the experience. It's true, without the plasma cutter you do spend more on angle grinder wheels than you make from the copper.

    It depends on what you've got for storage space too i suppose. You probably wouldn't want to store the steel or the cu/al windings. A trailer load of copper would be good to have for later on though.

  10. #7
    ScrapmanIndustries started this thread.
    ScrapmanIndustries's Avatar
    SMF Badges of Honor


    Member since
    Feb 2017
    Location
    Easton, Pa
    Posts
    361
    Thanks
    99
    Thanked 303 Times in 132 Posts
    yes. right now i just relocated to ohio. so i just got some storage unit that i rent out that has my welding trailer and other tools in it.


  11. #8
    Patriot76's Avatar
    SMF Badges of Honor


    Member since
    Dec 2012
    Location
    Buffalo Commons
    Posts
    2,949
    Thanks
    10,589
    Thanked 7,220 Times in 2,256 Posts
    The fencing plyers are a nice touch and something I had not thought of. The embarrassing part is I grew up with those in my hand and never thought to use them. Much easier than the way I have been doing it. Thanks.
    Last edited by Patriot76; 04-12-2020 at 04:13 AM. Reason: forgot one word
    Give back more to this world than we take.

  12. The Following User Says Thank You to Patriot76 for This Post:


  13. #9
    ScrapmanIndustries started this thread.
    ScrapmanIndustries's Avatar
    SMF Badges of Honor


    Member since
    Feb 2017
    Location
    Easton, Pa
    Posts
    361
    Thanks
    99
    Thanked 303 Times in 132 Posts
    your welcome

  14. #10
    eesakiwi's Avatar
    SMF Badges of Honor



    Member since
    Dec 2010
    Location
    NZ
    Posts
    2,531
    Thanks
    2,909
    Thanked 2,556 Times in 1,227 Posts
    Oi worked out that i was paying 50 cents in 9 inch cutting disc per fridge compressor
    & i was using the new disc to cut one end of the Copper loops off to get the wire out of the Iron stator.
    Its most efficient if once the 9 inch disc is worn down to 7 inch, or plus just a tiny bit, to put that disc into a 7 inch grinder.
    Its all to do with the M/minute at the outer edge of the disc.

    NEVER put a oversized disc into a grinder, OR use a grinder without its guard.

    Make sure you have the correct mounting flanges for your disc, flat or a cupped centre, and internal dia, mostly 7/8ths (22mm)

    You can use a worn disc in a smaller grinder as long as the disc is no bigger in dia than what the grinders ment to use.
    So a 9 inch disc worn down to 7 inch will go into a 7 inch grinder.
    Worn down to 5 inch, will go into a 5 inch grinder
    Worn down to 4 1/2 will go into a 4 1/2 grinder.

    A 7 inch disc in a 9 inch grinder is inefficient because the surface speed of the outside dia, cutting face, is travelling too slow & it will break the grit off.

    The grit should grind the metal away, once the individual grit has got dull, it heats up & expands & that bit chips off as dust, exposing new sharp grit to do the grinding again.

    Too slow a mm/M and the grit wont get hot enough to expand & the whole bit of grit breaks off & you get a brown dust instead of fine grit/steel finings.

    And dont grind anywhere near cars or window glass, the sparks will melt into or attach to glass, ruining it immediately.
    Last edited by eesakiwi; 04-13-2020 at 05:53 AM.

  15. The Following 3 Users say Thank You for This Post by eesakiwi:


  16. #11
    ScrapmanIndustries started this thread.
    ScrapmanIndustries's Avatar
    SMF Badges of Honor


    Member since
    Feb 2017
    Location
    Easton, Pa
    Posts
    361
    Thanks
    99
    Thanked 303 Times in 132 Posts
    It sounds like you might have picked up that last lesson the hard way.

  17. #12
    eesakiwi's Avatar
    SMF Badges of Honor



    Member since
    Dec 2010
    Location
    NZ
    Posts
    2,531
    Thanks
    2,909
    Thanked 2,556 Times in 1,227 Posts
    Quote Originally Posted by ScrapmanIndustries View Post
    It sounds like you might have picked up that last lesson the hard way.
    Yep, not me though. My fathers car windscreen developed lots of little rust spots.

    When they were picked at ( after they had eaten the windscreen wiper blades ) they left little chip sized craters.
    I can spot them from metres ( yards ) away now. The sparks look like they melt into the glass too.


  18. Similar threads on the Scrap Metal Forum

    1. Scrappers Guide to Sealed Units
      By SMRscrap in forum Scrap Metal Tips and Advice
      Replies: 5
      Last Post: 07-21-2022, 05:52 PM
    2. Need advice on Plasma Cutter for sealed Units
      By aph in forum Scrap Metal Questions and Answers
      Replies: 19
      Last Post: 12-22-2020, 06:03 PM
    3. sealed units?
      By Lawn Island Scrapper in forum Scrap Metal Questions and Answers
      Replies: 25
      Last Post: 03-01-2018, 10:10 AM

Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (0 members and 2 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook