Results 1 to 16 of 16

Markets for Rigid Plastics

| Scrap Metal Tips and Advice
  1. #1
    406Refining started this thread.
    406Refining's Avatar
    SMF Badges of Honor



    Member since
    Apr 2017
    Location
    Billings, MT
    Posts
    253
    Thanks
    317
    Thanked 397 Times in 148 Posts

    Markets for Rigid Plastics

    Hey everyone, Hope your week is going well.

    I have recently been looking into what it would take to accumulate plastic from scrapping and sell it to a buyer. The plastics in question are PS, PP, ABS, etc. The best I was able to find so far was a company that required a minimum quantity of 10K pounds. If anyone has any leads on some smaller quantity buyers (2-5K pounds) I would greatly appreciate it!



    A little background of what currently happens: Montana is one of those states that is less strict on what happens to plastic. It's just far enough away to make it challenging for shipping to any port. Currently, the DEQ (Department of Environmental Quality) considers plastic to be solid waste which means it can go to the landfill. While that makes the disposal easy I would much rather send it to a recycler if that option is available.


  2. #2
    mthomasdev's Avatar
    SMF Badges of Honor


    Member since
    Apr 2012
    Location
    pittsfield, ma
    Posts
    1,300
    Thanks
    348
    Thanked 1,532 Times in 704 Posts
    Quote Originally Posted by 406Refining View Post
    Hey everyone, Hope your week is going well.

    I have recently been looking into what it would take to accumulate plastic from scrapping and sell it to a buyer. The plastics in question are PS, PP, ABS, etc. The best I was able to find so far was a company that required a minimum quantity of 10K pounds. If anyone has any leads on some smaller quantity buyers (2-5K pounds) I would greatly appreciate it!

    A little background of what currently happens: Montana is one of those states that is less strict on what happens to plastic. It's just far enough away to make it challenging for shipping to any port. Currently, the DEQ (Department of Environmental Quality) considers plastic to be solid waste which means it can go to the landfill. While that makes the disposal easy I would much rather send it to a recycler if that option is available.
    You're going to have a difficult time with this. You've already found out that most companies don't want to talk to you unless you have a minimum 10k pounds. Most companies don't deal in mixed loads. There are also numerous different blends if PP, PS, and ABS. You'll want to find a company that is able to test your mix of each different kind and reblend them to get the desired blend. I did recently come across a company in Ontario that was buying mixed computer plastic from shredding operations. They also have a sister company in Western NY. They were only offering 3 cents per pound. Take trucking into account and you lose money. There are a few other companies that may be a possiblity. I'll try to remember tonight and shoot you a PM.

  3. The Following 2 Users say Thank You for This Post by mthomasdev:


  4. #3
    SMF Badges of Honor


    Member since
    Dec 2017
    Location
    Tucson AZ
    Posts
    361
    Thanks
    306
    Thanked 579 Times in 231 Posts
    Here you get whole .3 per pound on ABS if the colors aren't mixed and it's shredded. Seeing as how .3 wouldn't cover my fuel a shredder is out of the question.

  5. The Following User Says Thank You to 520 for This Post:


  6. #4
    APA's Avatar
    SMF Badges of Honor


    Member since
    Mar 2016
    Location
    Western Pennsylvania
    Posts
    628
    Thanks
    638
    Thanked 545 Times in 289 Posts
    I commend you on your vision to try something new and different. In my opinion, plastic recycling is not profitable at this time. You have to remember your time is valuable. Also logistic costs can sometimes turn a nice profit into a loss.

  7. The Following User Says Thank You to APA for This Post:


  8. #5
    DakotaRog's Avatar
    SMF Badges of Honor



    Member since
    Aug 2014
    Posts
    1,611
    Thanks
    602
    Thanked 1,675 Times in 830 Posts
    Yeah, unless you have a rural out building somewhere close by where you can store that stuff until you have the large amounts, I think you're probably screwed and its landfill material. Too bad because there is a lot of empty space in many parts of MT where such plastic could be stored to gain volume and it wouldn't inconvenience anyone at all.

    Here's a totally off the wall idea, and I've never tried it so don't know how much more of a hassle being "publicly known" it would be. Get the local media to cover your efforts and idea and then do a "Go Fund Me" page to cover the logistics, especially transportation costs, to recycle the plastic. People will fund about anything and some may view your desire valiant enough to pay you from their credit card to try doing "outback" plastic recycling. Good luck!!

  9. The Following 3 Users say Thank You for This Post by DakotaRog:


  10. #6
    SMF Badges of Honor

    Member since
    Oct 2012
    Location
    Alabama
    Posts
    764
    Thanks
    1,067
    Thanked 1,213 Times in 471 Posts
    Several years ago, I cleaned out the back lots of two sign companies and ended up with several thousand pounds of acrylic. It was all the same flat sign material but mixed colors. We found a buyer at 5 cents per pound, but they only bought container loads which had to weigh 40,000 lbs. After searching for extra acrylic to add to our load and hand stacking this stuff; we ended up with 38,000 lbs worth about $1,900.

    Hoping that would be good enough we shipped it to Mobile, AL port. After it was barged away, got a letter stating that the load didn't meet the weight requirements and they wouldn't pay at all. We tried to talk reasonably with the company, but they weren't budging, so we took it to court. My Dad got some kind of judgement, but I can't remember how much only it was about half the value. I don't think they ever payed any of the judgement.


    Since then, I haven't been too excited about plastics recycling. It's bulky and too hard to get a load into a container. The buyers are very picky about mixed plastics or any foreign material. Lastly, but importantly, I didn't get paid the last time around. If you have a lot of time, a ready supply, and good storage, it could work. Be careful your time and money costs don't exceed your profits.

  11. The Following 3 Users say Thank You for This Post by Pnutfarmer:


  12. #7
    jimicrk's Avatar
    SMF Badges of Honor


    Member since
    Sep 2013
    Location
    Tennessee
    Posts
    2,825
    Thanks
    2,917
    Thanked 4,838 Times in 1,877 Posts
    I consider myself lucky if I can find someone who will take it for free.

  13. The Following 2 Users say Thank You for This Post by jimicrk:


  14. #8
    mikeinreco's Avatar
    SMF Badges of Honor


    Member since
    Dec 2011
    Location
    TENNESSEE
    Posts
    4,972
    Thanks
    1,257
    Thanked 5,023 Times in 2,350 Posts
    Don't take this the wrong way but 38,000lbs was not 40,000 so really don't think you had a leg to stand on in court

  15. The Following 2 Users say Thank You for This Post by mikeinreco:


  16. #9
    SMF Badges of Honor

    Member since
    Oct 2012
    Location
    Alabama
    Posts
    764
    Thanks
    1,067
    Thanked 1,213 Times in 471 Posts
    Yes, that's true. I thought at the time that I might get a dockage for not meeting the preferred weight, not a complete denial of any payment when they accepted our shipment with no return possible.

    I guess my point is to be careful when dealing with bulky, labor intensive, low-priced materials.

  17. #10
    mikeinreco's Avatar
    SMF Badges of Honor


    Member since
    Dec 2011
    Location
    TENNESSEE
    Posts
    4,972
    Thanks
    1,257
    Thanked 5,023 Times in 2,350 Posts
    Quote Originally Posted by Pnutfarmer View Post
    Yes, that's true. I thought at the time that I might get a dockage for not meeting the preferred weight, not a complete denial of any payment when they accepted our shipment with no return possible.

    I guess my point is to be careful when dealing with bulky, labor intensive, low-priced materials.
    Either way good lesson for anyone who aspires to reach that much weight of any material thanks for your testimony

  18. #11
    Breakage's Avatar
    SMF Badges of Honor

    Member since
    Aug 2016
    Posts
    297
    Thanks
    242
    Thanked 273 Times in 149 Posts
    I'd put an ad on CL, to see if anyone was already bulking it and moving it along. At least, they might pick up for free. I've looked into Scrapo, an online plastic brokerage but haven't made any headway on it. we don't generate enough of anything to catch anyone's eye on that platform. But you might find someone near you either buying or processing.

    I don't know with whom you've already spoken but Pacific Steel & Recycling seems to be taking a few kinds of plastic and has locations in and around Montana. I would check with them, first. We deal with Canusa Hershman in our operations but they are largely on the East Coast. You can look into their outfit, though. I've also heard good things about QRS and they specialize in mixed rigids. Also, see if Vikoz has an office near you. They deal in both US and Canadian material and can probably see you in the right direction. Honestly, you might have more luck with someone in Alberta or BC, as Canada seems to have a more vigorous, better subsudized industry. Those tariffs, tho...

    As far as grading, if you can concretely identify PP and PC, separate them. They are higher-value plastics common to appliances. I've found that everything else pretty much goes along as a very low mixed grade of material. HDPE is less common in appliances but more valuable than the other two.

    I think your main issue will be how to bale it. Very few buyers I know will play ball when the plastics are loose.

  19. #12
    mthomasdev's Avatar
    SMF Badges of Honor


    Member since
    Apr 2012
    Location
    pittsfield, ma
    Posts
    1,300
    Thanks
    348
    Thanked 1,532 Times in 704 Posts
    One of the guys at my full time job used to be part owner of a family owned plastic injection molding company. For over a year, he has been saying that he thought there was good money in the computer plastics that I have. This week, he said he had a local buyer for shredded fire resistant ABS. Apparently the buyer would be interested in 1000 pounds or more. Prices were higher than probably half of non-ferrous commodities.

  20. #13
    Chaser1's Avatar
    SMF Badges of Honor

    Member since
    Nov 2018
    Location
    Orlando Florida
    Posts
    37
    Thanks
    6
    Thanked 12 Times in 9 Posts
    I'm in Florida and continually accumulate a lot of rigid plastic, primarily the outer shells from dehumidifiers. I still havn't found a single buyer within the state that would be interested in as much as a "single garage full". When it comes right down to it, that still does not amass to a great deal of weight. Furthermore, the range of code numbers among all the various pieces would seem to an unbelievable task of separating it all. Off to the landfill it goes.

  21. #14
    SMF Badges of Honor

    Member since
    Sep 2013
    Posts
    95
    Thanks
    0
    Thanked 84 Times in 42 Posts
    Plastics have a place, but there are so many things that could be made with metals...and used to be. The only thing that will stop this is a tariff of sorts on plastics that basically make it the same cost as metals. At least we can recycle those easily. Plastics are largely an economic falsehood.

  22. #15
    Kalvlin's Avatar
    SMF Badges of Honor

    Member since
    Dec 2013
    Location
    CT
    Posts
    315
    Thanks
    594
    Thanked 321 Times in 178 Posts
    I think that there was a market for computer ABS when oil was high but that market is so weak now no one seems to want to deal with the ABS so I send it to the transfer station that supplies the high tech trash to energy plant with the rest by the coast. It burns. It burns
    Remember... wherever you go... there you are

  23. #16
    mikeinreco's Avatar
    SMF Badges of Honor


    Member since
    Dec 2011
    Location
    TENNESSEE
    Posts
    4,972
    Thanks
    1,257
    Thanked 5,023 Times in 2,350 Posts
    I would check with your scrap yards and see how much plastic/metal mix is acceptable for shred..........Most things are made of plastic anyway these days so I have just been trying to make a good mixture of metal/plastic and taking it to the yard.........If plastic is excessive some may have to go to landfill


  24. Similar threads on the Scrap Metal Forum

    1. about plastics
      By mike1 in forum Scrap Metal Tips and Advice
      Replies: 22
      Last Post: 01-06-2019, 11:48 PM
    2. Markets and Politics
      By alloy2 in forum Off Topic Discussions
      Replies: 26
      Last Post: 11-27-2017, 08:50 AM
    3. Markets in the crapper
      By BRASSCATCHER in forum General - Let's talk business
      Replies: 3
      Last Post: 11-07-2012, 10:43 PM
    4. Copper prices in the big markets
      By Ran440 in forum Scrap Metal Prices
      Replies: 35
      Last Post: 09-26-2012, 05:17 PM
    5. What to do with plastics?
      By wtwolf13 in forum Scrap Metal Tips and Advice
      Replies: 2
      Last Post: 08-28-2011, 10:57 PM

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook