Results 1 to 13 of 13

projection tv lenses

| Scrap Metal Tips and Advice
  1. #1
    mike1 started this thread.
    mike1's Avatar
    SMF Badges of Honor


    Member since
    Dec 2011
    Location
    Rochester indiana
    Posts
    553
    Thanks
    231
    Thanked 93 Times in 76 Posts

    projection tv lenses

    i took apart a projection tv and was thinking of selling the lenses i hear they can melt padlocks and stuff is that true? im going to sell 2 i was wanting to know if they sell fast and what to sell them for? oh and i hauled the tv on my hand truck i used the cart form instead of the 2 wheel cause this thing thing was huge 60in maybe i was not liking it when i went over bumps but i did have 2in ratchet on it so that was good. you guys have any luck selling them fast?


  2. #2
    SMF Badges of Honor


    Member since
    Jun 2017
    Location
    Las Vegas
    Posts
    1,306
    Thanks
    3,232
    Thanked 1,922 Times in 785 Posts
    They're called fresnel lenses. Never really messed with them myself but you can google them along with projection tv and get an idea

  3. The Following 2 Users say Thank You for This Post by JJinLV:


  4. #3
    eesakiwi's Avatar
    SMF Badges of Honor



    Member since
    Dec 2010
    Location
    NZ
    Posts
    2,531
    Thanks
    2,909
    Thanked 2,556 Times in 1,227 Posts
    I don't think the rear projection TVs have Fresnel lenses. https://en.m.wikipedia.org/wiki/Fresnel_lens
    Inside there's three lens setups & if you are taking the Cast Ali end off, beware, there's a lot of a thin clear oil inside it. You can pop the rubber bubble to drain most of it out first.

    The front plastic clear screen has a texture to it that's similar to a Fresnel lens, but it's just vertical lines made to concentrate & then spread the individual pixel spots.

    I think the confusion comes from a 1960's -70's gimmick you could buy, it's a big sheet plastic Fresnel lens which you could mount in front of a smaller TV 14 - 21 inch screen, and it would magnify it up to 26-29 inches.
    It was only good if you were directly in front of it & didn't mind a colourful aurora thru the picture ( that probably didn't matter much in the late '60's, maybe it even helped...)

    I have seen a much smaller A4 size version sold as a 'Vehicle rear window reversing lens'.
    And yes, they will heat up something extremely fast with just sunlight, even if it's unfocused.

    At the same time, those lenses in the rear projection screen TVs. I left one on my passenger seat during the day.
    When I shifted it I found a thin arc of burn marks across the seat, right thru the material.
    You can actually see the sun's movement thru the whole day & where it was brighter & overcast as the sun moved thru it's arc.
    I'm lucky it didn't catch on fire.
    Last edited by eesakiwi; 11-20-2018 at 07:13 AM.

  5. #4
    eesakiwi's Avatar
    SMF Badges of Honor



    Member since
    Dec 2010
    Location
    NZ
    Posts
    2,531
    Thanks
    2,909
    Thanked 2,556 Times in 1,227 Posts
    I don't think the rear projection TVs have Fresnel lenses.
    Inside there's three lens setups & if you are taking the Cast Ali end off, beware, there's a lot of a thin clear oil inside it. You can pop the rubber bubble to drain most of it out first.

    The front plastic clear screen has a texture to it that's similar to a Fresnel lens, but it's just vertical lines made to concentrate & then spread the individual pixel spots.

    It think the confusion comes from a 1960's -70's gimmick you could buy, it's a big sheet plastic Fresnel lens which you could mount in front of a smaller TV 14 - 21 inch screen, and it would magnify it up to 26-29 inches.
    It was only good if you were directly in front of it & didn't mind a colourful aurora thru the picture ( that probably didn't matter much in the late '60's, maybe it even helped...)

    I have seen a much small A4 size version sold as a 'Vehicle rear window reversing lens'.
    And yes, they will heat up something extremely fast with just sunlight, even if it's unfocused.

    At the same time, those lenses in the rear projection screen TVs. I left one on my passenger seat during the day.
    When I shifted it I found a thin arc of burn marks across the seat, right thru the material.
    You can actually see the sun's movement thru the whole day & where it was brighter & overcast as the sun moved thru it's arc.
    I'm lucky it didn't catch on fire.

  6. The Following 2 Users say Thank You for This Post by eesakiwi:


  7. #5
    SMF Badges of Honor


    Member since
    Apr 2018
    Location
    United States
    Posts
    268
    Thanks
    212
    Thanked 179 Times in 97 Posts
    You don't need these lenses to melt, if you will, a padlock. It can be done with gallium. There are plenty of videos on Youtube about the remarkable characteristics of gallium. Just a few of the many:

    (gallium dissolving a Coke can)

    (opening a padlock with gallium)

    (pouring gallium on an iPhone)

    Just don't accidentally pour it on your pants...

  8. The Following User Says Thank You to recyclersteve for This Post:


  9. #6
    eesakiwi's Avatar
    SMF Badges of Honor



    Member since
    Dec 2010
    Location
    NZ
    Posts
    2,531
    Thanks
    2,909
    Thanked 2,556 Times in 1,227 Posts
    #### double post lol.
    I was trying to add to the post that the big mirror inside is a 'Front Silvered mirror's.
    Instead of the Silver being on the back of the glass, it's on the front of it.
    That's because if it's on the back there would be a slight mirror effect off the front of the pane of glass. Leading to a slight double image n the screen.

    The mirror can be used to make a 'True mirror' if you like a little woodworking joinery project. It's two mirrors touching each other, but set at 45° & in your reflection you get to see your own face just like everybody else sees it.

    In a normal mirror, your image is reversed, a right hand part in your hair looks like a left hand parting.
    You actually look quite different from what you think you look like.

    You can make one with a normal mirror, but you get a gap down the centre where the mirrors join.

    https://en.m.wikipedia.org/wiki/Non-reversing_mirror
    Last edited by eesakiwi; 11-22-2018 at 05:09 AM.

  10. The Following User Says Thank You to eesakiwi for This Post:


  11. #7
    mike1 started this thread.
    mike1's Avatar
    SMF Badges of Honor


    Member since
    Dec 2011
    Location
    Rochester indiana
    Posts
    553
    Thanks
    231
    Thanked 93 Times in 76 Posts
    yeah i kept the mirror thing neat its like a no glass mirror pretty cool. so it is oil in them thats what i thought.

  12. #8
    eesakiwi's Avatar
    SMF Badges of Honor



    Member since
    Dec 2010
    Location
    NZ
    Posts
    2,531
    Thanks
    2,909
    Thanked 2,556 Times in 1,227 Posts
    Yep, there's oil in them.... Lots of people, including me, have been caught out by opening them over carpet, concrete or wooden floors..

    Lots of oil & when it starts pouring out it seems not to stop until it's empty.

  13. #9
    MattInTheHat's Avatar
    SMF Badges of Honor


    Member since
    Sep 2012
    Location
    rock hill, sc
    Posts
    1,464
    Thanks
    1,142
    Thanked 1,396 Times in 703 Posts
    some tvs have a large square or rectangle flexible lense. they can start fires
    Currently looking for a job in or related to scrap/recycling. Relocation is possible for the right offer.

  14. The Following User Says Thank You to MattInTheHat for This Post:


  15. #10
    RLS0812's Avatar
    SMF Badges of Honor

    Member since
    Feb 2014
    Location
    Bucks County Pennsylvania
    Posts
    895
    Thanks
    155
    Thanked 633 Times in 358 Posts
    In my own personal experience - back when the televisions were still being made, they could sell for $20+.
    Now-a-days folks use them for solar water heaters, and they sell for $1 to $5 each.

  16. The Following 3 Users say Thank You for This Post by RLS0812:


  17. #11
    mike1 started this thread.
    mike1's Avatar
    SMF Badges of Honor


    Member since
    Dec 2011
    Location
    Rochester indiana
    Posts
    553
    Thanks
    231
    Thanked 93 Times in 76 Posts
    Quote Originally Posted by RLS0812 View Post
    In my own personal experience - back when the televisions were still being made, they could sell for $20+.
    Now-a-days folks use them for solar water heaters, and they sell for $1 to $5 each.
    thats crazy never seen one of them lol.

  18. #12
    18c troll's Avatar
    SMF Badges of Honor



    Member since
    Jan 2011
    Posts
    44
    Thanks
    20
    Thanked 51 Times in 21 Posts
    They are a ton of fun and easy to make. I have given them to local schools for science projects, or have made my own solar heater and still. I always have extra wood around.

  19. #13
    eesakiwi's Avatar
    SMF Badges of Honor



    Member since
    Dec 2010
    Location
    NZ
    Posts
    2,531
    Thanks
    2,909
    Thanked 2,556 Times in 1,227 Posts
    Are your 100% sure it's a Fresnel lens in those projection TV's?



    I have never found one in the ones I have scrapped out.
    I have found a similar plastic lens, but it's parrallel vertical ribs in it & its there to help stop individual pixels from blurring into each other, and to mix the pixel image properly to get the right colour. ( There's probably a better description of what I'm thinking that it does per pixel )

    I have another one I can get to too double check what the screen is like. The Fresnel lens I have definately come from a gimmick used to enlarge the screen of a small tv.

    Oh, I just realised, there's YouTube instruction videos of this. You can use the projection TV individual lens arrangement to make a projection TV from a small TV & maybe a computer monitor.
    It involves making a wooden box to hold the (CRT) TV & the lens setup, this projects the TV maybe onto a wall or such.
    The image is 'Reversed', so words end up spelt backwards, but you can utilise the mirror to fix that.
    It's a bit old-school, re the CRT TV, but a inventive person could use a LCD monitor, or use it in similar ways for its effects.


  20. Similar threads on the Scrap Metal Forum

    1. Overhead Projector Lenses??
      By mikeinreco in forum General Electronics Recycling
      Replies: 3
      Last Post: 10-26-2013, 08:57 AM
    2. projection tv
      By Copper Head in forum A Day in the Life of a Scrapper
      Replies: 2
      Last Post: 03-11-2013, 08:46 PM
    3. What to do with tv lenses
      By therealTI3 in forum Scrap Metal Questions and Answers
      Replies: 3
      Last Post: 01-03-2013, 11:05 AM
    4. Sony projection tv bulb and lenses
      By Chiipinscrapper in forum Dismantling, Breaking Down & Maximizing Scrap
      Replies: 5
      Last Post: 11-21-2012, 11:41 AM

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook