Results 1 to 9 of 9

To scrap or not to scrap: a UPS

| Scrap Metal Tips and Advice
  1. #1
    Nubs1201 started this thread.
    SMF Badges of Honor


    Member since
    Jun 2017
    Location
    Bloomington, IN
    Posts
    33
    Thanks
    20
    Thanked 17 Times in 8 Posts

    To scrap or not to scrap: a UPS

    So many gentlemen and gentlewomen of SMF, I have a Facebook find that was free with a few PCs. I didn't even know I was getting it until I showed up but she said it worked. It is an Uninterrupted Power Source. I didn't know until I looked this up later. She told me it worked when I took it but I don't think it does. I plug it in and can hear a click noise or two so you know it's getting some juice but no lights come on when you hit the power button and I tried plugging something into it and got nothing. So normally this sounds like I would just go ahead and scrap it out. I looked up these things online though and they can sell for something like 200$ at the low end. Does anyone have experience with something like this? Is it worth much if I try to sell as nonworking? Is it a simple fix? Thanks for any wisdom shared. It's a Tripp-lite brand and I can give more details if it seems necessary.



  2. #2
    t00nces2's Avatar
    SMF Badges of Honor


    Member since
    Jul 2014
    Location
    Sarasota, FL
    Posts
    1,697
    Thanks
    1,191
    Thanked 2,343 Times in 960 Posts
    It is either working or not. Is there a battery in it? If there is a battery in it, the test is to replace it. Find a store that specializes in battery sales (I will not recommend any particular company), have them put the right battery in and see if it works. If it does, buy the battery and you are off to the races.

    Now, I will tell you my personal experience with UPS's.... I have scrapped quite a few. You can give the $200 thing and try to sell. Best of luck to you. My thoughts are this, I scrap them all except for massive ones I find. The large amphours ones I get I buy a battery (usually < $40) which is way cheaper than buying new UPS. I use them to run my computer and audio video equipment. I live in Florida and we have a lot of droppage and brown outs as well as spikes due to lightning. The battery backup will smooth the current and theoretically help extend the life of the equipment. It will also allow you to finish work or not have to go through the whole reset thing as you are watching your favorite Star Trek episode. If you decide to scrap, they have a battery and a coil as well as some brass contact bands for the outlets as well as some wiring (ICW). I buy mine at garage sales for $1. I would not recommend paying much for a dead UPS.
    Last edited by t00nces2; 07-15-2017 at 08:10 PM.

  3. The Following 3 Users say Thank You for This Post by t00nces2:


  4. #3
    mike1's Avatar
    SMF Badges of Honor


    Member since
    Dec 2011
    Location
    Rochester indiana
    Posts
    553
    Thanks
    231
    Thanked 93 Times in 76 Posts
    Quote Originally Posted by t00nces2 View Post
    It is either working or not. Is there a battery in it? If there is a battery in it, the test is to replace it. Find a store that specializes in battery sales (I will not recommend any particular company), have them put the right battery in and see if it works. If it does, buy the battery and you are off to the races.

    Now, I will tell you my personal experience with UPS's.... I have scrapped quite a few. You can give the $200 thing and try to sell. Best of luck to you. My thoughts are this, I scrap them all except for massive ones I find. The large amphours ones I get I buy a battery (usually < $40) which is way cheaper than buying new UPS. I use them to run my computer and audio video equipment. I live in Florida and we have a lot of droppage and brown outs as well as spikes due to lightning. The battery backup will smooth the current and theoretically help extend the life of the equipment. It will also allow you to finish work or not have to go through the whole reset thing as you are watching your favorite Star Trek episode. If you decide to scrap, they have a battery and a coil as well as some brass contact bands for the outlets as well as some wiring (ICW). I buy mine at garage sales for $1. I would not recommend paying much for a dead UPS.
    yeah agreed since the battery is only worth a 1.00 thats what i got for one anyway 5lbs one battery .20 i got bare bright fro the coil though.

  5. #4
    Nubs1201 started this thread.
    SMF Badges of Honor


    Member since
    Jun 2017
    Location
    Bloomington, IN
    Posts
    33
    Thanks
    20
    Thanked 17 Times in 8 Posts
    What is the "coil"? I don't remember coming across anything that was thick copper and I've seen people reference a "coil" a few times and I'm not sure what's being talked about here. Sorry for newbie stuff.

  6. #5
    t00nces2's Avatar
    SMF Badges of Honor


    Member since
    Jul 2014
    Location
    Sarasota, FL
    Posts
    1,697
    Thanks
    1,191
    Thanked 2,343 Times in 960 Posts
    Kid. Man. Dude. Bro. Cuz. Pal. Buddy... Have you opened one up? My guess would be, "no". Once open, the coil inside is fairly obvious.

  7. #6
    Nubs1201 started this thread.
    SMF Badges of Honor


    Member since
    Jun 2017
    Location
    Bloomington, IN
    Posts
    33
    Thanks
    20
    Thanked 17 Times in 8 Posts
    Do you just mean the transformer?

  8. #7
    jimicrk's Avatar
    SMF Badges of Honor


    Member since
    Sep 2013
    Location
    Tennessee
    Posts
    2,825
    Thanks
    2,917
    Thanked 4,838 Times in 1,877 Posts
    Quote Originally Posted by Nubs1201 View Post
    Do you just mean the transformer?
    He's probably talking about the copper coils on the power board.

  9. #8
    Nubs1201 started this thread.
    SMF Badges of Honor


    Member since
    Jun 2017
    Location
    Bloomington, IN
    Posts
    33
    Thanks
    20
    Thanked 17 Times in 8 Posts
    Oh I haven't touched the board. I'm thinking leaving it alone and getting a high grade price would be better

  10. #9
    t00nces2's Avatar
    SMF Badges of Honor


    Member since
    Jul 2014
    Location
    Sarasota, FL
    Posts
    1,697
    Thanks
    1,191
    Thanked 2,343 Times in 960 Posts
    Quote Originally Posted by Nubs1201 View Post
    Do you just mean the transformer?
    Yes, the large transformer.



Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook