Page 1 of 2 12 LastLast
Results 1 to 20 of 30

Should You Charge A Fee For Scrap Metal Removal?

| Scrap Metal Tips and Advice
  1. #1
    admin started this thread.
    admin's Avatar
    SMF Badges of Honor

    Member since
    Sep 2010
    Posts
    684
    Thanks
    336
    Thanked 2,630 Times in 549 Posts

    Should You Charge A Fee For Scrap Metal Removal?

    Here's how to do a thorough scrap metal removal fee assessment.

    Lots of people think that just because scrap metal has some monetary value, and people just “give it away” that you're obligated to provide scrap metal removal services for free.

    This is only true if you don't care about whether or not you're actually losing money... Which is VERY easy to do.

    We created a worksheet for SMF members to will help you evaluate how much a scrap metal removal job is REALLY worth to you, by systematically calculating your costs vs your earnings according to some simple variables.

    But first let's look at how to use it and how it can help you.

    In my opinion, no scrap metal removal job is too small, you just need to charge a fee to make it worth it.

    The trick is getting the fee 'just right' so you always earn AT LEAST what you're worth, without accidentally over-charging the customer and losing the job.

    You're never losing out by offering a fee for your service to a customer who doesn't have enough scrap metal for a free removal, but you will ALWAYS lose out when you flat-out turn a customer down.

    First let's look at the costs we need to factor into our assessment.

    COSTS


    • Fuel
    • Man hours spent driving
    • Man hours spent on job
    • Man hours spent “breaking down”
    • Materials like blades, cutting discs, drill bits.


    All of those things cost money, and they can eat away at the profits from your scrap pretty quick if you're not careful.

    So let's create an example situation to create a practice scrap metal removal cost assessment.

    Our fictional example job:

    You'll be picking up 4 large household appliances (1 stove, 2 washers and a dryer), and a couple hundred lbs of weight equipment.

    The scrap is located about 30 miles away (30 minutes), and you'll be bringing along a helper to assist in loading the scrap. There won't be any breaking down or extra materials such as blades required. We'll also assume that it should take about an hour to get everything loaded up and be out of there.

    Looks like it could quality for a free removal right? Let's find out!

    Ok, so we have a general understanding of the job, let's start factoring costs...

    Fuel – First you need to know how much your fuel will cost.

    To start off you'll need to know your vehicle's MPG (miles per gallon).
    (If you don't know how to calculate your MPG, go here: https://www.google.com/search?q=how+to+calculate+mpg)

    Let's assume you'll be taking only 1 truck, it gets 20mpg on average, and the cost of fuel is currently $3 per gallon.

    The job is 30 miles away and you get 20mpg, so you will consume 1.5 gallons of gas EACH WAY (30mi / 20mpg), for a total of 3 gallons of gas.

    3 gallons x $3/gallon = $9

    Total cost of fuel is $9

    Next you need to figure out how much our man hours are worth, for both you AND your partner/helper.

    The first step to this is determining WHAT YOU'RE WORTH, per hour.

    If you haven't done so already, place an hourly wage on yourself and your helper, separately, right now.

    Let's assume that your hourly wage is $20, and your helper's hourly wage is $15. It's important to put a value on yourself.

    Next, you need to estimate how many man hours it will take to complete the job.

    If you ARE going to include drive time in your man hours, calculate your total hours by adding together the following estimated values:


    • Total hours to job x2 (don't forget the drive back)
    • Total hours on job
    • Total hours spent breaking down (if any)


    If you are NOT including drive time in your man hours, calculate your hours using the following estimated values:


    • Total hours on job
    • Total hours spent breaking down (if any)



    Total them all up. We will charge for drive time in this example.

    For our example job, we have a total of 2 man hours (2 total hours per person. 1 total hour worth of driving, 1 hour on the job).

    We won't be breaking anything down and we don't need any materials like blades to get the job done so we can skip that.

    Next we need to calculate the total cost per hour, which is the sum of your hourly wage AND your helper's hourly wage.

    In our case our total cost per hour is $35 per hour ($20 for you + $15 for your helper = $35)

    So you have 2 man hours to account for at $35, so for our example job, including drive time, the cost of man hours comes to $70 (2 hours x $35/hour).

    Now we need to add our cost of FUEL to our cost of MAN HOURS and we have the 'true' cost for this scrap metal removal job.

    Cost of fuel = $9

    Cost of man hours = $70

    Total cost for removal job = $79

    Ok, great, you know how much you have to make AT A BARE MINIMUM from the scrap in order for it to qualify as a “free removal”.

    So the next step is to estimate how much the scrap is actually worth.

    To do this, assuming it's all light iron (regular steel) you just need to know the steel price per ton and make a good guess at how much the scrap weighs.

    Let's assume that scrap steel is going for .06/lb, which is about $130/ton.

    We'll also assume that all 4 of the appliances each weigh about 100lbs, totaling 400lbs, and exercise equipment is 300lbs. This gives us a grand total of 700lbs.

    At .06 cents per pound, the value of our scrap is only about $42!

    With a total cost of $79 to even DO this job, and only $42 in scrap value means you're actually losing almost $40 if you remove this scrap for free! ($42 for scrap - $79 for hours/fuel = $37 loss)

    You have to charge a fee of AT LEAST $37 to earn what you deserve.

    Does all of that make sense?

    Our example job looked like it would make a few bucks, but that wasn't the case.

    Don't always assume that just because it's “free”, that it's worth it.

    As time goes on you'll be able to do this all in your head on a whim, but sometimes it helps to see it in a visual or even PHYSICAL form to make it easier to estimate the actual profitability of your scrap metal removal business.

    So attached is the Scrap Metal Removal Fee Assessment Worksheet, which you can use to quickly and easily do fee or free assessments before you commit to any local or long distance scrap metal removal projects.

    Feel free to download and print as many copies of the document linked below as needed to help you out. You might find it useful to print out a bunch and fill one out every time a prospective customer contacts you to request your services.

    Worksheet is available on your downloads page: https://www.scrapmetalforum.com/smf-...-downloads.php



  2. #2
    matador's Avatar
    SMF Badges of Honor

    We purchase laptop computers and many components for greater than scrap value. We offer a shipping reimbursement program.replies

    Member since
    Nov 2013
    Location
    Big Wonderful Wyoming
    Posts
    2,310
    Thanks
    1,813
    Thanked 3,204 Times in 1,450 Posts
    Don't forget vehicle upkeep!

    I also place a charge if we have to move something up stairs or like that. It's not only time, but you need equipment to do that too...

  3. The Following 4 Users say Thank You for This Post by matador:


  4. #3
    sawmilleng's Avatar
    SMF Badges of Honor


    Member since
    Feb 2013
    Location
    Central Kootenays, BC, Canada
    Posts
    861
    Thanks
    713
    Thanked 1,200 Times in 521 Posts
    There's also a cost to insuring at least your vehicle, and also the cost of general liability insurance if you choose to carry it. Something like vehicle insurance can be hard to pin down to how much per mile it might cost you.

    An easy way to estimate your vehicle insurance cost per mile is to do an estimate on how many miles per year or per month you drive and divide that by your yearly or monthly insurance costs. For example, I drive about 15k miles/year and it costs about 1500$/yr for insurance on the truck. 1500$/15,000 miles is 10 cents per mile insurance cost.

    In Admin's example above, insurance costs would be 60 miles X 10 cents per mile or $6.00. Darn near as much as the fuel cost!!

    Thanks, Admin, for taking the time to help the SMF members with this subject of estimating your cost. Its a detail we all tend to overlook!!

    Jon.

  5. The Following 2 Users say Thank You for This Post by sawmilleng:


  6. #4
    Hypoman's Avatar
    SMF Badges of Honor



    Member since
    Dec 2010
    Location
    Indiana
    Posts
    1,268
    Thanks
    2,772
    Thanked 1,331 Times in 512 Posts
    Great post. I would add that some people will scoff at you for charging. It IS ok to walk away at that point. Once you set a precedence of "doing a guy a favor", that precedence will spread like wildfire and you might as well quit.
    Determine never to be idle. No person will have occasion to complain of the want of time who never loses any. It is wonderful how much may be done if we are always doing.
    Thomas Jefferson

  7. The Following 9 Users say Thank You for This Post by Hypoman:


  8. #5
    SMF Badges of Honor

    Member since
    Sep 2014
    Posts
    16
    Thanks
    4
    Thanked 3 Times in 3 Posts
    Great information sharing here.

  9. #6
    SMF Badges of Honor


    Member since
    Mar 2014
    Location
    alberta
    Posts
    23
    Thanks
    51
    Thanked 26 Times in 15 Posts
    I have studied costs in all sorts of ways, Depending on how you operate and your goals, it can vary. I studied trucks for 4 years, all costs in. it ran about $1.41 a km or $2.27 a mile, for a one ton truck, repairs done by professional shop. So a guess would be maybe $1.00 a km if you can repair yourself and use a throw away truck.

    Again depending on what your up to, the cost of doing a job may have to include phone, cost of advertising and anything else you are paying out. I would rather pass on 5 small jobs for free and get one that I get paid for. There are exceptions to everything, but here the days of chasing one or two items of low value are over, it will cost you more to pick them up for free than they are worth.

  10. #7
    scrapdaddyj's Avatar
    SMF Badges of Honor


    Member since
    Aug 2014
    Location
    Meridian, ID
    Posts
    53
    Thanks
    4
    Thanked 39 Times in 21 Posts
    When i first started scrapping ACs i got all excited if i got a call to pickup an AC. Now having done a few i see the value in volume. I have found myself willing to pay a little more for ten units then i would for one. It seems reasoning for the higher prices offered to high volume customers at the scrap yard applies at the micro level of the startup recycler.

  11. #8
    CopperHeadAKA's Avatar
    SMF Badges of Honor


    Member since
    Nov 2015
    Location
    PA
    Posts
    265
    Thanks
    76
    Thanked 323 Times in 127 Posts
    A drop off could be free
    but you picking up items can't be free

  12. The Following 2 Users say Thank You for This Post by CopperHeadAKA:


  13. #9
    matador's Avatar
    SMF Badges of Honor

    We purchase laptop computers and many components for greater than scrap value. We offer a shipping reimbursement program.replies

    Member since
    Nov 2013
    Location
    Big Wonderful Wyoming
    Posts
    2,310
    Thanks
    1,813
    Thanked 3,204 Times in 1,450 Posts
    Let me bring up another idea for those who are in areas that can't charge: Collection events.

    Before the market slowed, I did a few of these. We'd get permission to use a parking lot (Churches, schools, and radio stations worked well for us). We would run ads and bring a truck and trailer by. The problem is that you're paying for stuff essentially, because of advertising costs. But, when the prices rebound, it's a great solution for E-Waste. Even a town of 10,000 people was able to fill half of my 15' box van.
    More than Scrap Value Shipment Tips: http://www.scrapmetalforum.com/scrap...tml#post242349

  14. The Following User Says Thank You to matador for This Post:


  15. #10
    SMF Badges of Honor

    Member since
    Nov 2015
    Location
    Norrköping
    Posts
    12
    Thanks
    0
    Thanked 1 Time in 1 Post
    Well of course scrap metal removal services should never be free. But at the same time ,the fees charged should not be too high or else it may scare away potential customers. But then selling scrap to industries that require such metals can also be quite rewarding so it is better to encourage people to sell their scrap metal articles to us.

  16. #11
    SMF Badges of Honor


    Member since
    Apr 2012
    Location
    Youngstown, OH
    Posts
    606
    Thanks
    6
    Thanked 282 Times in 193 Posts
    The biggest factor is what everybody thinks their time is worth. How much will gas cost and wear and tear is easy to figure out, the amount of profit per time to get you out of the house varies by person, finances, and mood for the most part.

    You should also take a good look at the place before starting to see what the odds are of you getting hurt, cut, or contaminated are going to be. I am sure people here have showed up to a place and looked around and said no thanks to a job that on paper looked profitable but on inspection looked like an accident waiting to happen.

  17. #12
    SMF Badges of Honor



    Member since
    Apr 2015
    Posts
    2,071
    Thanks
    615
    Thanked 2,443 Times in 1,090 Posts
    Free always arouses suspicion or question of motive.

    Charge for your services you'll get more respect.

  18. The Following 3 Users say Thank You for This Post by alloy2:


  19. #13
    WRSrecycling's Avatar
    SMF Badges of Honor

    Member since
    Jan 2016
    Posts
    8
    Thanks
    1
    Thanked 6 Times in 4 Posts
    A little charge is reasonable.


  20. The Following User Says Thank You to WRSrecycling for This Post:


  21. #14
    justdon's Avatar
    SMF Badges of Honor



    Member since
    Jun 2015
    Location
    florida
    Posts
    79
    Thanks
    48
    Thanked 60 Times in 29 Posts
    I guess that doesn't work in my area.Everybody that does it for free gets the job.I have not had call for a few month's now.I guess the only way I will get stuff is to remove for free.Its hard to beat the competition when that's what they are doing.

  22. #15
    SMF Badges of Honor

    Member since
    Jul 2011
    Posts
    960
    Thanks
    609
    Thanked 1,398 Times in 430 Posts
    I am not really in this space, but what about a consideration for free pick up, but "gratuity" is accepted? or a simple stop fee?

    Just some thoughts... the admin's post covers alot of the costs we don't regularly consider... this is the most important market to get a handle on them!
    Specializing in Maximum value for mixed precious metal printed circuit boards and electronics

    Check out our pricing and read some of our RAVING reviews: http://www.scrapmetalforum.com/scrap...tal-scrap.html
    QUESTIONS? Email us: info@CashForComputerScrap.com
    or Chat with us: www.CashForComputerScrap.com

  23. #16
    travistemple202020's Avatar
    SMF Badges of Honor


    Member since
    Jul 2012
    Location
    ames iowa
    Posts
    1,326
    Thanks
    267
    Thanked 883 Times in 495 Posts
    I used to do it for free when yards were able to buy appliances from all of us but now its heavily regulated which requires a license to tear down and sell, some yards still buy illegal but not close enough for me to make a profit lol so now I charge a flat rate of $10per appliance in town $20per out of town except microwaves/small stuff for $5ea and discounts for full truckloads depending on what gets added. sure I don't get as many calls as I use to but I figure eventually the illegal yards will get wise or fined enough to do so or vise versa those cherry picking and road dumpers will

  24. #17
    Repurposer's Avatar
    SMF Badges of Honor


    Member since
    Sep 2016
    Location
    Mesa, Arizona
    Posts
    185
    Thanks
    56
    Thanked 113 Times in 69 Posts
    I have people want to sell me their scrap all the time. They think I am kidding when I tell them I get 3 to 4 cents a pound for scrap steel. Other metals pay a little more but there is no way I can buy their scrap and cover expenses. I have a limited pick up area. I won't grab water heaters or dishwashers if that's all they have unless they are literally next door. I tried one time to charge a fee to pick up stuff but people balked at it. So I pick up for free but with limitations.

  25. The Following User Says Thank You to Repurposer for This Post:


  26. #18
    rca987's Avatar
    SMF Badges of Honor

    Member since
    Jan 2011
    Location
    Texas
    Posts
    938
    Thanks
    46
    Thanked 385 Times in 223 Posts
    I charged one time.

    To remove a fridge from a kitchen. See the problem I think, in my opinion, is when people are getting charged for a service, they come to expect you to do the job flawlessly, without damaging anything (which is perfectly acceptable). And if you do chip the paint on a doorway while squeezing a fridge through it after you had to take the fridge doors off to make it an extra tight fit, you will be expected to fix it.

    Now if it's a free service, you can't be expected to be "professional" in every aspect of what you're doing, and people tend to be more forgiving about small stuff.

    I always advertise as free pick up. Even if I have to drive 20 miles to pick up a water heater. You hope by doing this (and giving a business card), you are going to be getting a repeat customer.

    Even with steel at $60/ton, I still offer free.

    To each their own.
    Garbage keyboards > spɹɐoqʎǝʞ ʎɐqǝ

  27. The Following User Says Thank You to rca987 for This Post:


  28. #19
    cummins's Avatar
    SMF Badges of Honor


    Member since
    Apr 2013
    Location
    ontario
    Posts
    573
    Thanks
    15
    Thanked 255 Times in 171 Posts

    Should You Charge A Fee For Scrap Metal Removal?

    this is exactly why i dont go in peoples houses anymore. knuckle marks in a stairwell dryway and free pick up requires it to be easily assesable. in the driveway or side of house. if i hear its at the end of the driveway i wont go out of my way. chances are itll be gone by the time i show up. everyone remembers 290 a ton...they dont understand 130 or less

  29. #20
    cummins's Avatar
    SMF Badges of Honor


    Member since
    Apr 2013
    Location
    ontario
    Posts
    573
    Thanks
    15
    Thanked 255 Times in 171 Posts
    Quote Originally Posted by matador View Post
    Don't forget vehicle upkeep!
    My truck gets a wage. Just like i do. Fuel and time

  30. The Following User Says Thank You to cummins for This Post:



  31. Similar threads on the Scrap Metal Forum

    1. Missouri - Absolutely Free Appliance Removal and Scrap Metal Removal - Greater St. Louis Region
      By Unfex in forum Scrap Metal Removal, Junk Car Removal and Metal Recycling Services
      Replies: 0
      Last Post: 01-23-2012, 10:39 AM
    2. Scrap Metal Removal and Junk Car Removal Services Directory
      By admin in forum Scrap Metal Removal, Junk Car Removal and Metal Recycling Services
      Replies: 0
      Last Post: 02-20-2011, 08:24 PM
    3. Tennesee - Unwanted appliances/scrap metal hauled off FREE of charge in Murfreesboro/Smyrna
      By scrap_master_K in forum Scrap Metal Removal, Junk Car Removal and Metal Recycling Services
      Replies: 0
      Last Post: 01-28-2011, 11:35 PM
    4. Replies: 0
      Last Post: 12-10-2010, 10:49 AM
    5. Pennsylvania - Scrap metal removal and junk car removal service
      By stefan 76 in forum Scrap Metal Removal, Junk Car Removal and Metal Recycling Services
      Replies: 0
      Last Post: 10-29-2010, 03:48 PM

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook