Results 1 to 6 of 6

Tips for the Very Frugal.

| Scrap Metal Tips and Advice
  1. #1
    Rusty Nuts started this thread.
    Rusty Nuts's Avatar
    SMF Badges of Honor


    Member since
    Jan 2011
    Location
    Texas
    Posts
    86
    Thanks
    6
    Thanked 26 Times in 11 Posts

    Tips for the Very Frugal.

    I've been using my bike to ride around and scout residential areas.
    You can see much better at bike speeds and can see appliances and things in back yards that are worthwhile, that you might miss if you were just driving past.

    I made up some small fliers that I can leave on the door- or the big piece of junk in the driveway, I put them on with the blue colored 'easy release' masking tape.
    I designed the fliers at home using Word and printed them at Officemax for 10 cents a page- or about 2.5 cents each. (4 fliers per page)
    I also hand them out instead of business cards.
    I printed them on light colored green and blue paper so they stand out a little bit.
    I think I'm going to print some up on a heavy paper stock for a slightly more professional look. That would cost about 4 cents apiece.



    Using the bike to scout today, I came across on older car storage lot that full of metal junk that would need to be hauled off, so I made a note of the address and will look up the owner's address and send them a small flier in the mail ( they're about post card size anyway.)
    I also found a good area that has appliances that need to be hauled off, and I found a good size pile of scrap steel down near a creek bed. I'll go back tomorrow and work on breaking it down, and then return with the truck for the pick up.
    You could also drive to an area you wanted to scout, and then ride the bike to do the actual scouting to save gas, and just use the truck when you need to pick something up.

    If you wanna be all fantzy like- you can get a big box of professionally printed business cards at Office Max for just $20.

    A prepaid cell phone can be had for $20 at Best Buy, AT&T stores or even dollar stores. This gives you a separate phone number so you can tell it's a business call coming in and answer it in a professional manner.

    If you're going to scrap- you need magnets!- I pulled some really good ones out of TV sets that were on the side of the road.
    They'll stick to the outside of the truck - or the bike- so they're always handy.

  2. The Following 2 Users say Thank You for This Post by Rusty Nuts:



  3. #2
    Scrap man's Avatar
    SMF Badges of Honor

    Member since
    Nov 2010
    Location
    NY
    Posts
    657
    Thanks
    36
    Thanked 172 Times in 93 Posts
    Good ideas. With the bike, though, you can't carry much like you could if you were walking, unless you're scouting for larger stuff. If you're just out on trash day, I'd recommend walking.
    There's nothing more fun and more effective than hitting something repeatedly with a sledgehammer

  4. #3
    SMF Badges of Honor


    Member since
    Nov 2010
    Location
    Boise, ID
    Posts
    2,702
    Thanks
    2,237
    Thanked 2,352 Times in 1,014 Posts
    Quote Originally Posted by Scrap man View Post
    Good ideas. With the bike, though, you can't carry much like you could if you were walking, unless you're scouting for larger stuff. If you're just out on trash day, I'd recommend walking.
    A person could build a bike trailer, or modify a kid trailer for hauling smaller stuff. Just an idea.

    I think the OP's main idea was to scout out and then come back, but someone else might get to it before he returns.

  5. #4
    Rusty Nuts started this thread.
    Rusty Nuts's Avatar
    SMF Badges of Honor


    Member since
    Jan 2011
    Location
    Texas
    Posts
    86
    Thanks
    6
    Thanked 26 Times in 11 Posts
    The bike is just for scouting- although it would work with a trailer on the back if you wanted to do pick ups with it. ( Did anyone see the show Junk Raiders?)

    Don't underestimate the "green' aspect of the recycling.
    People respond very well to 'going green' and recycling- plus it makes you stand out from the guys wearing dirty overalls. (no offense to the dirty overall guys)

    Today while on a scouting ride- I came across a HUUUGE vent-a-hood that had been uninstalled from a restaurant. Looks like either aluminum or stainless.
    I talked to a waitress inside and got the contact info for the GM and will be back on Monday to see if he wants to get rid of it- and maybe get some cash for the employee Christmas party fund
    Last edited by Rusty Nuts; 01-29-2011 at 07:28 PM.

  6. #5
    ElChaffinch's Avatar
    SMF Badges of Honor

    Member since
    Jan 2016
    Location
    England
    Posts
    24
    Thanks
    23
    Thanked 14 Times in 8 Posts
    nice example of how a little thought goes a long way and some local knowledge can prove more useful than all the muscle in the world

  7. #6
    MattInTheHat's Avatar
    SMF Badges of Honor


    Member since
    Sep 2012
    Location
    rock hill, sc
    Posts
    1,464
    Thanks
    1,142
    Thanked 1,396 Times in 703 Posts

    Tips for the Very Frugal.

    most restaurant grade kitchen equipment is non magnetic stainless for easy cleaning.

    they make trailers for bikes. the most common are for putting children in. probably could find a cheap beat up one and modify it
    Currently looking for a job in or related to scrap/recycling. Relocation is possible for the right offer.

  8. The Following 2 Users say Thank You for This Post by MattInTheHat:



  9. Similar threads on the Scrap Metal Forum

    1. any tips about scrapping cars??
      By scrappy in forum Scrap Metal Tips and Advice
      Replies: 28
      Last Post: 07-19-2022, 07:37 PM
    2. free tips
      By corycouch in forum Scrap Metal Tips and Advice
      Replies: 5
      Last Post: 05-29-2014, 09:17 AM
    3. Any tips for me
      By regidroz in forum Scrap Metal Tips and Advice
      Replies: 15
      Last Post: 01-20-2013, 11:04 PM
    4. i need a frugal, small scrap trailer to keep in the driveway
      By bluemeate in forum Off Topic Discussions
      Replies: 11
      Last Post: 08-26-2012, 09:49 AM
    5. Any tips?
      By Scrappermatt in forum Scrap Metal Tips and Advice
      Replies: 12
      Last Post: 03-30-2012, 01:17 AM

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook