Results 1 to 15 of 15

Oil/gas draining

| Scrap Metal Tips and Advice
  1. #1
    DevinThaScrapper started this thread.
    DevinThaScrapper's Avatar
    SMF Badges of Honor

    Member since
    Nov 2012
    Location
    Nebraska
    Posts
    588
    Thanks
    120
    Thanked 605 Times in 247 Posts

    Oil/gas draining

    Anyone have any tips for draining oil and gas from lawnmowers i have 2 mowers full of gas and oil, the gas can prob. Be reused but anyone have any mess free tips to drain the gas and oil and dispose of thr oil, that wont cost to much



  2. #2
    supaholaya's Avatar
    SMF Badges of Honor


    Member since
    Mar 2013
    Location
    Philly
    Posts
    39
    Thanks
    0
    Thanked 25 Times in 11 Posts
    Get a Lil pump from harbor freight they are real cheap it works like a siphon

  3. #3
    Gravitar's Avatar
    SMF Badges of Honor



    Member since
    Jul 2012
    Location
    Central Texas
    Posts
    1,086
    Thanks
    1,258
    Thanked 1,431 Times in 525 Posts
    Unbolt the motor from the deck and turn them over to take the gas out. Just pour the gas from the mower into a funnel that goes into a container. The same for the oil, or you can drain it out of the oil pan through a drain plug somewhere on the bottom.
    Made in China, Recycled in the Republic of Texas!

    "When the mind fails, brute force prevails" - CTSSolutions

  4. The Following 2 Users say Thank You for This Post by Gravitar:


  5. #4
    ScrappinRed's Avatar
    SMF Badges of Honor

    Member since
    Jan 2012
    Location
    texas
    Posts
    709
    Thanks
    319
    Thanked 710 Times in 342 Posts
    ...then I'm pretty sure you can drop off the old oil at one of your local auto parts stores. several around here have free drop offs for that stuff. that is, if you can't reuse it in your own equipment?
    ~You have to start somewhere to get anywhere~

  6. The Following User Says Thank You to ScrappinRed for This Post:


  7. #5
    Mechanic688's Avatar
    SMF Badges of Honor



    Member since
    Mar 2011
    Location
    Warsaw , Ind. In the heart of the lakes, and down the street from the hotel where Al Capone stayed.
    Posts
    9,568
    Thanks
    11,247
    Thanked 10,730 Times in 4,728 Posts
    Our lawnmower repair shop uses a suction style turkey baster that you buy at the dollar store. It has a suction bulb on the top of it.
    You can suck about every drop of gas out of it. Don't have to worry about tipping it over and spillage.
    P & M Recycling - Specializing in E-Waste Recycling.
    If you enjoy your freedom, thank a vet.

  8. The Following 2 Users say Thank You for This Post by Mechanic688:


  9. #6
    SMF Badges of Honor



    Member since
    Feb 2012
    Location
    OK
    Posts
    5,728
    Thanks
    6,814
    Thanked 3,464 Times in 1,989 Posts
    I put my used oil into a 5 gallon bucket with a lid, and when it starts getting near full I take it by an auto parts store to be recycled. Until it's full, and after it's had time to settle out, I skim oil off the top to fill my chainsaw chain oil bottle etc

  10. The Following 3 Users say Thank You for This Post by Bear:


  11. #7
    SMF Badges of Honor


    Member since
    Sep 2012
    Location
    Cincinnati, Ohio
    Posts
    285
    Thanks
    271
    Thanked 254 Times in 127 Posts
    Quote Originally Posted by Bear View Post
    Until it's full, and after it's had time to settle out, I skim oil off the top to fill my chainsaw chain oil bottle etc
    That's a good idea, I'm going to use that.

  12. The Following User Says Thank You to Wolfwerx for This Post:


  13. #8
    greytruck's Avatar
    SMF Badges of Honor



    Member since
    Jan 2012
    Location
    Thornton, Illinois
    Posts
    1,873
    Thanks
    1,639
    Thanked 1,733 Times in 893 Posts
    The twist on/off spout from a red gas can will screw onto most lawnmower gas tank cap. Put the mower on a table or so and dump the gas into the gas contaner and put in your working lawnmower. I havent bought gas for the mower for 2+ years now.
    As for oil, dump it in a drip pan like said and bring to auto store

  14. The Following 2 Users say Thank You for This Post by greytruck:


  15. #9
    parrothead's Avatar
    SMF Badges of Honor


    Member since
    Jan 2011
    Location
    Treasure Coast, FL
    Posts
    2,416
    Thanks
    667
    Thanked 2,067 Times in 953 Posts
    I have seen people fab up a nice table to lay parts on to drain oil and other fluids. It is usually fairly small like 2 foot by 2 foot maximum and has a top made from expanded steel and it all funnels into a 5 gallon bucket underneath.

    Back where I lived before there was a local auto parts store that had a designated day every month to take all of this stuff free.

    When I lived on the farm growing up we poured out the old oil around fence posts. It killed the weeds and protected the posts from moisture. I am not recommending this, but I'll bet that there are some old time farmers that still practice this.
    "64K should be enough for anybody." - Bill Gates 1981
    http://www.treasurecoastelectronicrecycling.com/

  16. The Following User Says Thank You to parrothead for This Post:


  17. #10
    Mechanic688's Avatar
    SMF Badges of Honor



    Member since
    Mar 2011
    Location
    Warsaw , Ind. In the heart of the lakes, and down the street from the hotel where Al Capone stayed.
    Posts
    9,568
    Thanks
    11,247
    Thanked 10,730 Times in 4,728 Posts
    Quote Originally Posted by greytruck View Post
    The twist on/off spout from a red gas can will screw onto most lawnmower gas tank cap. Put the mower on a table or so and dump the gas into the gas contaner and put in your working lawnmower. I havent bought gas for the mower for 2+ years now.
    As for oil, dump it in a drip pan like said and bring to auto store
    I think all our auto parts stores are doing the recycle think with the used oil, maybe their getting paid to recycle it. Hmmm
    We seem to be getting an over abundance of water in our gasoline. Even to the point of throwing a can of Heet into the tank every other fillup.

  18. #11
    DevinThaScrapper started this thread.
    DevinThaScrapper's Avatar
    SMF Badges of Honor

    Member since
    Nov 2012
    Location
    Nebraska
    Posts
    588
    Thanks
    120
    Thanked 605 Times in 247 Posts
    Thanks guy's Im going to try these ideas!

  19. #12
    SMF Badges of Honor



    Member since
    Feb 2012
    Location
    OK
    Posts
    5,728
    Thanks
    6,814
    Thanked 3,464 Times in 1,989 Posts
    Quote Originally Posted by Mechanic688 View Post
    I think all our auto parts stores are doing the recycle think with the used oil, maybe their getting paid to recycle it. Hmmm
    Yeah, they're gettin paid for it, if you'll check the receipt next time you buy some, you'll see who ; )

  20. #13
    newattitude's Avatar
    SMF Badges of Honor


    Member since
    Jun 2011
    Location
    Hinckley Ohio, home of the buzzards
    Posts
    2,163
    Thanks
    1,431
    Thanked 2,497 Times in 904 Posts
    Quote Originally Posted by greytruck View Post
    The twist on/off spout from a red gas can will screw onto most lawnmower gas tank cap. Put the mower on a table or so and dump the gas into the gas contaner and put in your working lawnmower. I havent bought gas for the mower for 2+ years now.
    As for oil, dump it in a drip pan like said and bring to auto store
    *Facepalm*

    Omg, I NEVER even thought of that! how many mowers have I tipped and spilled gas AND oil out of in my scrapping lifetime!!

    I learned to put a piece of duct tape over the gas cap holes and removed the engine and then tip out the fluids but I still spill them.

    Dang, I can't believe I never thought of this.
    Scrapper, Scrap Yard Worker, Horse farm worker, Cooler Puller and just plain ''tired''

  21. #14
    ginofrater's Avatar
    SMF Badges of Honor


    Member since
    May 2013
    Location
    Canada
    Posts
    506
    Thanks
    921
    Thanked 254 Times in 160 Posts
    Quote Originally Posted by Mechanic688 View Post
    Our lawnmower repair shop uses a suction style turkey baster that you buy at the dollar store. It has a suction bulb on the top of it.
    You can suck about every drop of gas out of it. Don't have to worry about tipping it over and spillage.




    Just some pics.

  22. #15
    Mechanic688's Avatar
    SMF Badges of Honor



    Member since
    Mar 2011
    Location
    Warsaw , Ind. In the heart of the lakes, and down the street from the hotel where Al Capone stayed.
    Posts
    9,568
    Thanks
    11,247
    Thanked 10,730 Times in 4,728 Posts
    Thank you Gino and the gas does not seem to bother it


  23. Similar threads on the Scrap Metal Forum

    1. Gas Grills
      By 708bigbuck in forum Scrap Metal Tips and Advice
      Replies: 22
      Last Post: 11-23-2014, 11:28 AM
    2. Gas is way too expensive
      By poundigity24 in forum A Day in the Life of a Scrapper
      Replies: 61
      Last Post: 07-27-2013, 01:00 AM

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook