I know most of us are holding on to non ferrous items as prices are so bad, I have only turned in steel so far this year. Anyone sell anything other than steel lately?
|
I know most of us are holding on to non ferrous items as prices are so bad, I have only turned in steel so far this year. Anyone sell anything other than steel lately?
|
Al/Cu Rads Clean - 1.12
#2 Copper 2.09
Clean Extrusion 0.71
Electric Motors 0.21
Dirty Motors (Case fans, etc) 0.15
95% extrusion 0.52
Metal Recycling Entrepreneur
|
Yesterday I took in the following items:
Extruded aluminum = $0.70 a #
6061 aluminum = $0.60 a #
Clean sheet aluminum = $0.50 #
Christmas lights (bulbs still on) =$0.35 #
Metal Recycling Entrepreneur
New prices today....Nebraska
copper $ 1.45
dirty copper .40
Yellow brass .95
Red brass 1.00
aluminum .30
stainless .25
elec motors .10
Prepared steel $80/ton
Unprepared 60/ton
Automobiles 20/ton
Preferred customer bonus is almost as high as automobiles
|
In Billings, Montana (As of Saturday), Dirty Aluminum is still at $0.10 per pound. Shred is at $60/Ton ($0.03 per pound).
In Wyoming, shred is at $30 per ton. The yard will likely lower it to $20/Ton soon, though.
|
After you told me it was $60/Ton, my friend came over and reported that Pacific was $50/Ton. Three prices now!Originally Posted by matador
So I called and jokingly ask the same yard guy, "Why did you lie to me?" He apologized and said he had Motherboard on the brain.
I've been meaning to tell you that you were right and that I'll be getting my reports from Wyoming from now on.
|
Whole vehicle batteries .27/lb. Down from .34 2-3 weeks ago. I made $1.92 profit on my last load of batteries. Better than losing, but definitely my hardest-earned two bucks in recent memory!
|
Here are the prices of a yard close to me.
Bundles #1 1/2 G 150
HMS #1/#2 Mix G 150
HMS- Old Machinery G 125
HMS- Rebar G 125
HMS- Unprepared G 150
P&S- 5 ft (& Under) G 180
P&S- Unprepared G 160
Shred/HMS Mix N 150
Autos N 125
Motors N 125
Shred N 100
Aluminum
Alumnum Wheels P .57
Chrome Wheels P .42
Aluminum Radiators P .33
Unclean Aluminum Radiators P 0.23
ACSR P 0.15
Cast Aluminum P .34
Irony Cast Aluminum P .18
CATV BARE P .26
CATV BLACK P .24
Bare Extrusions P 0.48
Irony Extrusions P 0.42
Painted Extrusions P 0.43
Clean Sheet Aluminum P 0.36
Irony Sheet Aluminum P 0.17
Copper/Aluminum Radiators P 1.04
Irony Copper/Aluminum Radiators P .89
Aluminum Wheels (w/Tires) Each 5
Brass
Cartridge Brass P 1.29
Chrome or Mixed Cartridge Brass P 1.19
Hard Brass P 1.65
Irony Brass P 0.25
Mixed Brass P 1.25
Red Brass P 1.60
Yellow Brass P 1.30
Copper
Copper- #1 P 1.98
Copper- #2 P 1.79
ACR Ends P .30
Alernators P .09
Ballasts (NO PCBs) P .04
Bare Bright P 2.09
Electric Motors P .10
Copper/Brass Radiators P 1.30
Irony Copper/Brass Radiators P .65
Sealed Units P 0.04
Copper- Sheet P 1.70
Starters P .19
Stators P 0.19
Transformers P 0.19
AC Compressors P 0.15
Insulated Copper
Copper- Christmas Lights P 0.18
Copper- Harness Wire P 0.50
Copper- Insulated #1 P .86
Copper- Insulated #2 P .49
Copper- Insulated #3 P .17
Copper- Jelly Cable P 0.17
Lead
Auto Batteries P 0.16
Clean Soft Lead P 0.23
Solder 50/50 P 0.14
Steel Cased Batteries P 0.15
Wheel Weights P 0.15
Stainless
Stainless- 304 P 0.30
Stainless- 304 Irony P 0.25
Stainless- 304 Unprepared P 0.25
Stainless- 316 P 0.39
Stainless- 316 Irony P 0.32
Stainless- 409 P 0.09
Last edited by jimicrk; 02-13-2015 at 05:33 AM.
|
what yard you use in nashville....I had salvage company there for several years.........is hermitage metals still in biz.......i'm sure express is in la vergne
BUYING ALL COMPUTER SCRAP WORKING OR NOT
CHECK OUT MY BUYERS THREAD http://www.scrapmetalforum.com/scrap...nic-scrap.html
https://getjunk.net/Knox-County-TN-0...Recycling.html
|
|
This is a price list from a yard at exit 1 in Clarksville and it was from last week. They update their website daily so I'll bet the prices are lower now. I only take my shred there. I use a yard in Millersville, Tn. and sell my aluminum and insulated copper there and then there is another new yard off Cowen street in downtown Nashville where I sell my #1 and #2 copper and aluminum cans. I'm not sure about Hermitage Metals but I know there is a yard off of Central Pike in Hermitage. I've never been there but I need to call and talk to them.
|
I didn't sell any scrap last week, but yesterday I sold copper #2, yellow brass and #2 insulated wire. Thirty pounds of #2 copper was paid $1.95, I haven't checked my spread sheets, but think that's $.40 lower than price I got just before Christmas. Yellow brass nineteen pounds was paid $1.45. I don't need to check anything to know that is the lowest in several years! #2 insulated wire fifty one pounds and only paid $.55 a pound (very sad). Told the manager I'm going to sell half and hold half until prices on the red metals start going in the other direction. He told me copper is not bottomed out yet! I sell this same yard all of my 300 stainless and all aluminum. He said Aluminum is down a couple of pennies but holding solid.
Tomorrow I'll make a trip to my steel yard, not ready for that disappointment. I can't see trying to hold piles of steel and darn sure can't eat it, so will need to sell and forget about once WAS! Then again five years ago we were throwing the steel away, I know that was stupid. It will be over 3,000 pounds of steel and 300 to 400 pounds of cardboard, lets see how many pennies difference between tin and cardboard. Need to sell the cardboard because there's a 30% chance of rain on Sunday. Rain is what we need more than anything, so that is good!
|
|
Ryanw I'm a little jealous of your #2 copper and extrusion price, was that this last week? Wondering about the week, as I'm trying to gauge the effect of scrap prices, due to last weekends dock shutdowns on the west coast. Just a three day shutdown and it really backed things up at San Pedro and Long Beach!
|
|
It was the day before my post. Prices are still holding at the same.
Experienced Scrapper
Called my yard today to see what prices are at.... Detroit Metro
#2 copper $1.85/lb
Brass $1.28lb
#2 insulated light .60/lb
Electric motors .16/lb
Transformers .20/lb
Steel .4/lb
Sheet aluminum .43/lb
New Guy
|
Hey guys! My company buys all grades of metal, and non-ferrous through the door.
Aluminum
5052 - .60
6061 - .60
Cast Wheels - .55
Painted Al - .50
Litho - .52
Breakage - .10
Rads
AL/Cu - 1.10
Dirty Al/Cu - .95
Al Rads - .4
Dirty Al Rads - .15
Auto Rads - 1.25
Dirty Auto Rads - 1.00
Copper
110/BB/Silver - 2.15
Clean Copper Roofing - 2.05
#1 - 2.05
#2 - 1.90
Turnings/Lite - 1.8
Sn Plated - 1.9
Enam - 1.9
Enam w/ Mica - 1.75
Brass
Rod Solids - 1.4
Rod Turnings - 1.3
Red - 1.5
Semi-Red - 1.45
Yellow - 1.4
EDM - 1.4
Any more prices, let me know!
By upgrading your membership you can have your own thread on the buyers forum.
Lots more exposure.
Experienced Scrapper
Thornton Scrapper
|
Vinyl siding @ .04
Alum Siding @ .55
Copper#1 @ $2.00
Paper/Cboard @ .02
Alum cans @ .55
Shred @ 110/Ton
|
Cleaning up the work area and had to dump off a few things to make room for a law office clean out coming up. Dismal prices down here:
shred: .04 per #
batteries: .08
christmas lights w bulbs: .06
comp power supplies no wire: .10
6000 series aluminum: .50
~You have to start somewhere to get anywhere~
|
|
Dirty ALum has been $.25 to $.27 forever around here now $.20 lb.
There are currently 1 users browsing this thread. (0 members and 1 guests)
|
Browse the Most Recent Threads
On SMF In THIS CATEGORY. 
OR 
|
Posting Permissions
Bookmarks