Page 1 of 2 12 LastLast
Results 1 to 20 of 25

Identifying Tin

| Scrap Metal Identification
  1. #1
    CAS started this thread.
    SMF Badges of Honor


    Member since
    Oct 2010
    Location
    Central New Jersey
    Posts
    27
    Thanks
    1
    Thanked 5 Times in 4 Posts

    Identifying Tin

    Does anyone know how to tell the difference between steel and tin? The only thing I read is that tin doesn't rust and that tin bars make a cracking sound when bent. Is there any other easy way to tell the differnece?



  2. #2
    CAS started this thread.
    SMF Badges of Honor


    Member since
    Oct 2010
    Location
    Central New Jersey
    Posts
    27
    Thanks
    1
    Thanked 5 Times in 4 Posts
    I read that tin doesn't give off sparks when grinding and steel does. I guess using a grinding wheel would be the best way to check.

  3. #3
    SMF Badges of Honor


    Member since
    Oct 2010
    Location
    ROANOKE VA
    Posts
    13
    Thanks
    13
    Thanked 1 Time in 1 Post
    well mad my first trip today and i had the metal panels from a dryer and they classified it as tin? if that helps any

  4. #4
    Mick's Avatar
    SMF Badges of Honor



    Member since
    Aug 2010
    Location
    Palermo, Me
    Posts
    3,405
    Thanks
    363
    Thanked 3,086 Times in 1,326 Posts
    I think in some/most instances "tin" is being used to refer to what should actually be called "light iron" (less than 1/8"). Tin is a chemical usually used to coat another metal such as steel which results in what is called a tin can. Off the top of my head, I can't think of any example of pure tin.

    (on edit) - DUH - Tin foil.
    Last edited by Mick; 10-18-2010 at 08:04 PM. Reason: thought of example
    People may laugh at me, but that's ok. I laugh all the way to the bank.

  5. The Following User Says Thank You to Mick for This Post:


  6. #5
    tjlock's Avatar
    SMF Badges of Honor



    Member since
    Sep 2010
    Location
    Central Illinois (Streator)
    Posts
    188
    Thanks
    9
    Thanked 37 Times in 20 Posts
    Seems like no matter what we take in we get tin prices. Unless we have a full load of cast iron, then we get the cast iron price.

  7. #6
    Mick's Avatar
    SMF Badges of Honor



    Member since
    Aug 2010
    Location
    Palermo, Me
    Posts
    3,405
    Thanks
    363
    Thanked 3,086 Times in 1,326 Posts
    That's usual. A "mixed" load will all get the price of the lowest material in the load applied to the entire load - usually Light Iron (tin). I saw a load come across the scales where I go that I just couldn't believe. There were several batteries (should have been .16/lb) about 8-10 radiators (unprepared) a BUNCH of copper wire (insulated), brake hubs (#1 iron); but it all went as Light Iron (.08 lb) cause of probably 100 lbs. The guys in the pickup didn't want to take the time and effort to unload and weigh the stuff separately. I about croaked.

  8. #7
    tjlock's Avatar
    SMF Badges of Honor



    Member since
    Sep 2010
    Location
    Central Illinois (Streator)
    Posts
    188
    Thanks
    9
    Thanked 37 Times in 20 Posts
    Ouch, those guys just lost some big money. I have a pile of insulated wire sitting in shed that I strip when I get time. No matter how small the wire is, I cut it and toss it into the pile.

  9. #8
    CAS started this thread.
    SMF Badges of Honor


    Member since
    Oct 2010
    Location
    Central New Jersey
    Posts
    27
    Thanks
    1
    Thanked 5 Times in 4 Posts
    Quote Originally Posted by Mick View Post
    That's usual. A "mixed" load will all get the price of the lowest material in the load applied to the entire load - usually Light Iron (tin). I saw a load come across the scales where I go that I just couldn't believe. There were several batteries (should have been .16/lb) about 8-10 radiators (unprepared) a BUNCH of copper wire (insulated), brake hubs (#1 iron); but it all went as Light Iron (.08 lb) cause of probably 100 lbs. The guys in the pickup didn't want to take the time and effort to unload and weigh the stuff separately. I about croaked.
    That kills me when people do that. I want to yell at them, "Do you know how much money you're losing that way?!?!

  10. #9
    Happy-Scrappy's Avatar
    SMF Badges of Honor


    Member since
    Oct 2010
    Location
    Pacific Northwest
    Posts
    19
    Thanks
    1
    Thanked 3 Times in 3 Posts
    Things that make ya go HHHMMMMM...:confused::confused::confused:

    On the topic of the question however, I believe Mick is right. I have never referred to my light stuff as "light Iron" I refer to it as "tin" or "sheet metal".

    It does work here that they will eyeball your load however and if you have tin and steel mixed, you will get a "mixed tin" load and it will be called in as a percentage based on the guy in the yards perspective. It is good to be on his good side

    So if you take in somewhat of a mixed load you will not just get hammered for the lowest price "tin"

  11. The Following User Says Thank You to Happy-Scrappy for This Post:


  12. #10
    SMF Badges of Honor


    Member since
    Nov 2010
    Location
    Southwestern Pa
    Posts
    338
    Thanks
    27
    Thanked 176 Times in 102 Posts
    (on edit) - DUH - Tin foil.
    Uh, correct me if I'm wrong, but isn't what's commonly referred to as tinfoil (I wear a hat made of it, to keep the men in the black helicopters from reading my mind, but I digress...), anyway, isn't it really aluminum foil?

  13. #11
    Mick's Avatar
    SMF Badges of Honor



    Member since
    Aug 2010
    Location
    Palermo, Me
    Posts
    3,405
    Thanks
    363
    Thanked 3,086 Times in 1,326 Posts
    Quote Originally Posted by Ditchdigger View Post
    Uh, correct me if I'm wrong, but isn't what's commonly referred to as tinfoil (I wear a hat made of it, to keep the men in the black helicopters from reading my mind, but I digress...), anyway, isn't it really aluminum foil?
    Touche. Although there technically is "tin foil" which is used to coat other metals. But, yes, the commonly known is aluminum (insert bashing head smilie). So I still need to come up with an example.

  14. #12
    SMF Badges of Honor


    Member since
    Nov 2010
    Posts
    165
    Thanks
    23
    Thanked 69 Times in 36 Posts
    Yeah. Tin and Iron are two different elements completely, and tin is actually quite expensive. If you really want to get scientific, tin is a lead like metal, and therefore is used in lead-free solders.

  15. The Following User Says Thank You to TheMetalizer for This Post:


  16. #13
    Jillyenator's Avatar
    SMF Badges of Honor

    Member since
    Feb 2014
    Location
    Asheville, NC. Also Arizona.
    Posts
    346
    Thanks
    853
    Thanked 280 Times in 142 Posts
    I think any tin i find gets thrown in with aluminum. I can't tell them apart. Or zinc.

    SS seems a little easier to sort out - they have a more 'machined' look with little score lines, and seem heavier for their size then Al.

    I should probably get a grinder and try some spark tests.

  17. #14
    Mudlucky's Avatar
    SMF Badges of Honor

    Member since
    May 2013
    Location
    Wisconsin
    Posts
    398
    Thanks
    230
    Thanked 484 Times in 194 Posts
    Yes, spark test. Not all "stainless" with marks is actually stainless...some of it is sheet aluminum. Zinc nets me more at my yard than cast aluminum. And.....the price tin is about 3 or 4 times better than aluminum. It is worth learning the difference. In the scrapping world, knowledge is king. Those who take the time to learn will earn more money. If you don't take the time to learn, someone else will and will laugh all the way to the bank. (I know that is someone's tag line...it definitely applies here!)

    Ken

  18. The Following User Says Thank You to Mudlucky for This Post:


  19. #15
    Jillyenator's Avatar
    SMF Badges of Honor

    Member since
    Feb 2014
    Location
    Asheville, NC. Also Arizona.
    Posts
    346
    Thanks
    853
    Thanked 280 Times in 142 Posts
    OK, I'm sold, Mudlucky. My Non-Ferrous White Metals bins will have to sit until i can sort it all out.

  20. #16
    SMF Badges of Honor

    Member since
    Aug 2011
    Posts
    466
    Thanks
    1,612
    Thanked 417 Times in 199 Posts
    Jillyenator - an angle grinder will become one of your most used tools. Not only used to separate and clean up metals, but will also help to differentiate stainless from aluminum with a spark test, and also to identify plated metals. Brass and copper are sometimes plated with a white surface, and aluminum is often plated with a brass colored surface. It will pay for itself many times over in time saved and identifying metals that might get misclassified.

  21. The Following User Says Thank You to erewen for This Post:


  22. #17
    billygoat's Avatar
    SMF Badges of Honor

    Member since
    Feb 2012
    Location
    Rochester, NY
    Posts
    630
    Thanks
    99
    Thanked 491 Times in 250 Posts
    I use a Dremel tool with a cut-off wheel to spark test. Up to this point, I don't have any use for an angle grinder, so no use running out to get one. Just don't buy the Chicago Electric knock-off from Harbor Fright (pun intended), it doesn't have enough "oomph" to use for spark testing. Besides, the one I had died after six months, so instead of getting a free replacement I bought the Dremel at Walmart.

  23. The Following User Says Thank You to billygoat for This Post:


  24. #18
    happyscraper's Avatar
    SMF Badges of Honor


    Member since
    Feb 2012
    Location
    spring hill,fl
    Posts
    2,864
    Thanks
    350
    Thanked 1,371 Times in 847 Posts
    I use a 4 1/2" angle grinder from harbor frieght all the time and I'm sure it has more oomph than a dremel tool.

  25. The Following User Says Thank You to happyscraper for This Post:


  26. #19
    bigburtchino's Avatar
    SMF Badges of Honor



    Member since
    Mar 2011
    Location
    California
    Posts
    1,647
    Thanks
    4,388
    Thanked 2,835 Times in 1,132 Posts
    I don't know why a lot of the scrap yards refer to light iron/steel as "tin". I doubt there is much tin in that classification at all? I have been giving my light iron/steel buyer a hard time with this. Couple of weeks ago I intently collected all the tin cans from my house, had two trash cans full carefully cleaned and labels all removed. I put two trash cans of tin cans on top of my 900+ pounds of light iron/steel. Told the forklift driver go put it on the scale, (driver says boss be mad). Three minutes or less, the boss (Eddie) "Burt are you messy with my head" over the PA. I get to office to get paid, the girl gives me my receipt and cash for the load. She says now Eddie says for me to give you a "bonus", both hands please! Dumping a pile of the oldest, dirtiest, pennies in my hands, that's for the tin cans. Tell him I want to see him, (he wants to see you too!). What's with the food cans? he says. Me to him "You want to call light Iron/steel (#2 tin) I'm going to bring you tin (cans)". Take them home with you he said. I told him I will, if you sell me your computer towers. I asked what do you pay for them? Get this board price #2 tin ($.03 to $.04 a pound). At lease they have tin in them (solder)!

  27. The Following 2 Users say Thank You for This Post by bigburtchino:


  28. #20
    SMF Badges of Honor

    Member since
    Jul 2014
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts
    It seems like using a magnet to identify iron / steel would be easier and a lot faster than grinding it with a grinder.

    Aluminum, tin and most other metals are not magnetic.

    True Tin is really expensive. I think it is currently running around $10 a pound.


  29. Similar threads on the Scrap Metal Forum

    1. Need help identifying these boards
      By Climber34 in forum E-Waste Grading and Identification
      Replies: 15
      Last Post: 12-10-2012, 06:50 AM
    2. Need help identifying block of solder
      By Bamcis in forum Scrap Metal Identification
      Replies: 1
      Last Post: 11-16-2012, 12:59 PM
    3. Need help identifying old computer
      By Bamcis in forum General Electronics Recycling
      Replies: 35
      Last Post: 10-14-2012, 09:30 PM
    4. Need help with identifying this.
      By johnuppy in forum General Electronics Recycling
      Replies: 11
      Last Post: 09-30-2012, 03:46 PM
    5. need help identifying this metal
      By chrisc in forum Scrap Metal Questions and Answers
      Replies: 23
      Last Post: 08-16-2012, 06:26 AM

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook