Results 1 to 8 of 8

Round Copper Bar from Welding Machine

| Scrap Metal Identification
  1. #1
    caracal started this thread.
    SMF Badges of Honor

    Member since
    Jun 2018
    Location
    Toronto
    Posts
    3
    Thanks
    0
    Thanked 1 Time in 1 Post

    Round Copper Bar from Welding Machine

    I don't have a photo, but the scrap yard would only give us Copper #2 for some copper bars we had from an old welding machine.
    They said it's "machine copper" , definitely not #1. Any ideas what type of copper was used on old commercial welding machines that were built with copper and brass?
    We had a few bare chunks of copper, about 25lbs each..
    For the brass they identified it as C-Metal brass which was the top paid.



  2. #2
    CJBlackburn's Avatar
    SMF Badges of Honor

    Member since
    Jun 2018
    Location
    Fulton, MS
    Posts
    34
    Thanks
    53
    Thanked 42 Times in 18 Posts
    Was there anything on the copper such as paint or solder? I've bought and sold tons of copper for years, never heard of machine copper grading.

    If it's clean it doesn't matter the usage, at least not in any market I've entertained. Really need to see it to be sure, but sounds like a gimmick to me.
    Last edited by CJBlackburn; 06-09-2018 at 12:10 AM.
    My mother always said "Ask your father." My father always said "If it doesn't work, hit it with a hammer. If that doesn't work, hit it again."

  3. The Following User Says Thank You to CJBlackburn for This Post:


  4. #3

    Member since
    May 2018
    Location
    USA
    Posts
    262
    Thanks
    162
    Thanked 202 Times in 118 Posts
    Heavy copper solids go for big bucks.


  5. The Following User Says Thank You to Proton for This Post:


  6. #4
    caracal started this thread.
    SMF Badges of Honor

    Member since
    Jun 2018
    Location
    Toronto
    Posts
    3
    Thanks
    0
    Thanked 1 Time in 1 Post
    Quote Originally Posted by CJBlackburn View Post
    Was there anything on the copper such as paint or solder? I've bought and sold tons of copper for years, never heard of machine copper grading.

    If it's clean it doesn't matter the usage, at least not in any market I've entertained. Really need to see it to be sure, but sounds like a gimmick to me.
    Completely clean.
    He said it's not pure copper because it's machine copper... No difference in look that round copper bars.. if you google 'round copper bar', it was a bar like that, about 2 inches wide, solid..

    $16/pound?? Really? They gave us $2.80.

    Google Image for '110 Round Copper bar', there is one with a blue background, looks exactly same, but we had bigger.
    They said they have a special machine to analyze and they know it's not pure copper so they can't even give the $3.20 for the best copper.

  7. The Following User Says Thank You to caracal for This Post:


  8. #5
    jimicrk's Avatar
    SMF Badges of Honor


    Member since
    Sep 2013
    Location
    Tennessee
    Posts
    2,826
    Thanks
    2,917
    Thanked 4,838 Times in 1,877 Posts
    As long as it was clean and not tinned it should be #1. I always ask about grading and pricing before I unload anything. If I don't agree, I'll take it to another yard.

  9. The Following 2 Users say Thank You for This Post by jimicrk:


  10. #6
    CJBlackburn's Avatar
    SMF Badges of Honor

    Member since
    Jun 2018
    Location
    Fulton, MS
    Posts
    34
    Thanks
    53
    Thanked 42 Times in 18 Posts
    I would have them show me the machine and the test results. They should be talking about a test gun, they can do it right in front of you instantly. If they neglect to do so, I would do business elsewhere.

    No respectable yard should have a problem showing you what type of metal you have. I always prove grading to my customers so they can be further educated. It makes life easier for both parties and eliminates any thoughts of foul play.

    If they don't want to show you, chances are they're buying your #1 for #2 price. Yards that have to lie to their customers to make a profit don't deserve your patronage.
    Last edited by CJBlackburn; 06-09-2018 at 03:54 PM.

  11. The Following 4 Users say Thank You for This Post by CJBlackburn:


  12. #7
    caracal started this thread.
    SMF Badges of Honor

    Member since
    Jun 2018
    Location
    Toronto
    Posts
    3
    Thanks
    0
    Thanked 1 Time in 1 Post
    Quote Originally Posted by CJBlackburn View Post
    I would have them show me the machine and the test results. They should be talking about a test gun, they can do it right in front of you instantly. If they neglect to do so, I would do business elsewhere.

    No respectable yard should have a problem showing you what type of metal you have. I always prove grading to my customers so they can be further educated. It makes life easier for both parties and eliminates any thoughts of foul play.

    If they don't want to show you, chances are they're buying your #1 for #2 price. Yards that have to lie to their customers to make a profit don't deserve your patronage.
    Well, their copper #1 price was better than everybody, but now it's obvious why... they probably don't give it often.
    Those bars were about 80lbs of copper in total.. Oh well..

  13. #8
    CJBlackburn's Avatar
    SMF Badges of Honor

    Member since
    Jun 2018
    Location
    Fulton, MS
    Posts
    34
    Thanks
    53
    Thanked 42 Times in 18 Posts
    Exactly. Lots of dealers throw out big prices then chop you with grading, almost always based on total BS. Problem is most people aren't aware and fall for it.

    It really gives the scrap business a bad name overall, which makes it hard for honest dealers to gain a positive reputation and creates higher demand for state regulations on the industry. Sigh.

    There is still a chance they're being straight forward about it, but again it would surprise me since I've never had an issue with "machine copper" yet I deal in lots of copper pulled from machines, lol.
    Last edited by CJBlackburn; 06-09-2018 at 11:57 PM.


  14. Similar threads on the Scrap Metal Forum

    1. round 2 schoon salvage
      By jerryschoon in forum Introduce yourself
      Replies: 3
      Last Post: 05-03-2014, 09:20 PM
    2. Welding tanks
      By scrapping4ever in forum Misc. Metal Recycling
      Replies: 6
      Last Post: 06-28-2013, 10:50 PM
    3. Arkansas - We remove scrap all round ark
      By 501 scrapper in forum Scrap Metal Removal, Junk Car Removal and Metal Recycling Services
      Replies: 0
      Last Post: 07-19-2010, 12:50 PM

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook