SMF Buyer Finder - Click an item below to find a Scrap Metal Forum buyer that buys what you're selling.

Page 4 of 4 FirstFirst ... 234
Results 61 to 66 of 66
  1. #1
    406Refining started this thread.
    406Refining's Avatar
    Last Online: Yesterday
    SMF Badges of Honor


    Member since
    Apr 2017
    Location
    Billings, MT
    Posts
    49
    Thanks
    138
    Thanked 44 Times in 19 Posts

    Buying Washer, Dryer, Dishwasher, Microwave, Air Conditioner Control Boards. 5/19/18

    We buy all types of appliance parts and control boards, both working and nonworking! Prices: 5/19/2018

    New Items Added! 5/19/2018

    -Tested Large Water Heater Control Board (roughly 8"x 6"): $8.50 each
    -Tested Small Water Heater Control Board (roughly 4" x "3): $6.50 each
    -Untested Large Water Heater Control Board (roughly 8"x 6"): $5.50 each
    -Untested Small Water Heater Control Board (roughly 4" x "3): $3.50 each


    Tested Items:
    *Please include the plastic mounting cases on all boards.
    How to test a board: We offer significantly more per control board that is tested. Below is our quick and easy testing procedure:

    1. Plug the appliance in.
    2. Take a picture of the powered up front control panel.
    3. Label each board with brand, tested/untested, and picture corresponding to the tested board.

    -Washer Control Board: $8.50 each
    -Dryer Control Board: $9.50 each
    -Dishwasher Control Board: $9.50 each
    -Microwave Control Board (Whirlpool, LG, Maytag, Frigidaire, Panasonic): $3.00 each
    -Microwave Control Board (Hamilton Beach, Rival, Sunbeam, Galanz, etc): $2.50 each
    -Samsung Microwave Control Board (*found in Samsung and GE Microwaves): $5.00 each
    -Panasonic Microwave Inverter (*please include the plastic case): $7.00 each
    -Air Conditioner/Central Air Board (Green): $6.50 each
    -Air Conditioner/Central Air Board (Brown): $4.50 each
    - Air Conditioner/Central Air Button Board: $0.75 each
    -Furnace Board (Green): $6.50 each
    -Furnace Board (Brown): $4.50 each
    -Refrigerator Board (Green): $5.50 each
    -Refrigerator Board (Brown): $4.00 each
    -Misc. Refrigerator Board: $3.00/lb
    -Freezer Board (Green): $5.50 each
    -Freezer Board (Brown): $4.00 each
    -Misc. Freezer Board: $3.00/lb
    -Oven Board Module (Typically 2"x 6"): $2.50 each
    -Oven Main Board: $8.00 each
    -Dehumidifier Board: $3.00 each
    -TV Flat Screen Main Board (*monitor boards not included at this time): $5.50 each
    -TV Flat Screen Power Board (*monitor boards not included at this time): $4.00 each
    -TV Flat Screen Misc. Board (*monitor boards not included at this time): $3.00/lb




    Untested Boards:
    *Please include the plastic mounting cases on all boards.
    -Dishwasher Board (Whirlpool, Kenmore, Kitchenaid, Frigidaire, GE): $6.00 each
    -Dishwasher Board (Bosch, Samsung, LG, ASKO): $5.00 each
    -Washer Board: $3.00 each
    -Dryer Board (Whirlpool, Maytag): $5.00 each
    -Dryer Board (Samsung, GE, Frigidaire, Etc): 3.00 each
    -Microwave Board (
    Whirlpool, LG, Maytag, Frigidaire, Panasonic): $1.00
    -Microwave Board (
    Hamilton Beach, Rival, Sunbeam, Galanz, etc): $0.50 each
    -Samsung Microwave Board (
    *found in Samsung and GE Microwaves): $3.00 each
    -Panasonic Microwave Inverter Board (*please include the plastic case): $4.00 each

    -Air Conditioner/Central Air Board (Green): $2.50 each
    -Air Conditioner/Central Air Board (Brown): $2.00 each
    - Air Conditioner/Central Air Button Board: $0.75 each
    -Furnace Board (Green): $3.50 each
    -Furnace Board (Brown): $2.50 each
    -Refrigerator Board (Green): $2.50 each
    -Refrigerator Board (Brown): $2.00 each
    -Misc. Refrigerator Board: $3.00/lb
    -Freezer Board (Green): $2.50 each
    -Freezer Board (Brown): $2.00 each
    -Misc. Freezer Board: $3.00/lb
    -Oven Board Module (Typically 2"x 6"): $1.00 each
    -Oven Main Board: $3.50 each
    -Dehumidifier Board: $2.00 each


    Misc. Items (Category 1): The Following Items Do Not Need to be Tested:

    -Relays and Sensors: $4.50/lb
    -Synchronous Motors: $4.00/lb
    -Refrigerator Compressor Cooling Fans: $4.00 each
    -Oven Range Controls: $1.00/lb
    -Washer Motor Control Board: $5.00 each
    -Washer, Dryer, Dishwasher, Microwave Timers: $4.00 each
    -Refrigerator Compressor Control Module (*Found next to the refrigerator compressor. Please include the plastic case.): $5.00 each


    Misc. Items (Category 2): The Following Items Do Not Need to be Tested. Items in This Category Need to Have Little to No Signs of Rust.

    -LG Dishwasher Motor no. 8268409, 8534941 (* Found on Whirlpool, Kenmore, Kitchenaid Dishwashers): $5.00 each
    -Johnson/Askoll Dishwasher Pumps (*Found on Frigidaire Dishwashers): $3.00 each
    -Johnson/Askoll Dishwasher Motors (*Found on Frigidaire Dishwashers. Please Include the Mounting Bracket):$5.00 each
    -Microwave Transformers$5.00 each


    Misc. Items (Category 3): The Following Items Do Not Need to be Tested. Items in This Category Cannot be Missing ANY Components:

    -Kingston 2GB Ram (cannot be missing ANY components): $20/lb
    -Misc. 2GB Ram (cannot be missing ANY components): $16.50/lb


    Magnetrons: Mangetrons Need to be Tested With Either the Hot Water Method or the Meter Method (procedures are attached in a document at the bottom of the page):

    -Samsung OM75P(10): $5.00 each
    -Samsung OM75P(31): $4.25 each
    -Other Samsung Models: $4.00 each
    -Whirlpool Models: $4.00 each
    -LG Models: $3.50 each
    -Panasonic Models: $4.00 each
    -Sharp Models: $3.50 each
    -Witol Models: $3.00 each
    -Daewoo Models: $3.50 each
    -Galanz Models: $2.75 each
    -All Other Models: $2.50 each


    Packing up Items:

    Items need to be well packed to prevent damage in transit. We do not require you to purchase high quality packing materials. Packing items with newspaper is 100% acceptable.

    Shipping:

    The seller always pays for the shipping. We only pay for the materials sent to us. When preparing boards for shipment be sure to wrap, pack, and label them individually. We are not responsible for any boards damaged in transit.

    Shipping Address: *Please let us know if your box has signature required on it before sending it in.

    Anthony Overcast
    4890 Vandaveer Road
    Billings, MT 59101
    United States


    Payment:

    Payment will be sent via PayPal or Business Check within 3 business days of receiving the boards.

    Website:

    CASH FOR CONTROL BOARDS - Home

    Contact us: controlboardsales@gmail.com
    Last edited by 406Refining; Yesterday at 10:27 AM. Reason: New Items Added. Prices Increased on Certain Items.
    Send PMSend PM  

  2. The Following 10 Users say Thank You for This Post by 406Refining:


  3. #61
    406Refining started this thread.
    406Refining's Avatar
    Last Online: Yesterday
    SMF Badges of Honor


    Member since
    Apr 2017
    Location
    Billings, MT
    Posts
    49
    Thanks
    138
    Thanked 44 Times in 19 Posts
    Quote Originally Posted by ozarksewaste View Post
    On the microwave boards...Is it just the board or does it have to include the push button display on the front too? Sometimes they have a flat cable fitting between the board and the display...what is your preference on that?
    I buy them both ways. I leave that entirely up to you. I've found that you can fit more boards in a box without the front button displays. Thanks



  4. #62
    SMF Badges of Honor


    Member since
    Dec 2013
    Posts
    203
    Thanks
    0
    Thanked 125 Times in 78 Posts
    Just wondering if anyone has heard from Anthony in the past couple weeks. My package was delivered about a month ago. On April 17 he told me he had a few more boards to go through and he would have me a total. I have emailed him twice since then with no response. I noticed that he updated the prices on here since then

  5. The Following User Says Thank You to mseashell for This Post:


  6. #63
    SMF Badges of Honor

    Member since
    Sep 2017
    Posts
    4
    Thanks
    20
    Thanked 5 Times in 4 Posts
    Hello everyone. I did talk to Anthony about a week ago. He told me that everything is a go for my next shipment. I had not been able to contact him either and didn't want to send anything without making sure everything was OK. He said he was working on getting caught up with everything. Apologized for being out of contact.

    I sent three more boxes out yesterday afternoon. Hopefully all will go well.

    Keep messaging him. His college classes should be winding up.

  7. The Following User Says Thank You to Rdc for This Post:


  8. #64
    406Refining started this thread.
    406Refining's Avatar
    Last Online: Yesterday
    SMF Badges of Honor


    Member since
    Apr 2017
    Location
    Billings, MT
    Posts
    49
    Thanks
    138
    Thanked 44 Times in 19 Posts
    Hi everyone. Thank you for your patience on the delays. I just finished the semester and am just about caught up with the current orders. There will no longer be any delays in processing and payment for shipments. Just a heads up: as the weather continues to warm up cockroaches are going to start making an appearance in appliances (mainly microwaves). Due to the health risks associated with cockroaches and their droppings we do no accept any boards/parts with signs of cockroach damage.
    Send PMSend PM  

  9. #65
    Earther's Avatar
    SMF Badges of Honor

    Member since
    Aug 2017
    Posts
    97
    Thanks
    2
    Thanked 40 Times in 23 Posts
    If a van full of parts where to be deluvered ti your frint steps would you be prepared to handle aomethjng like that. I have put out the good word about your dealings and that might not take me long to make happen seeung as im in denver. O and how about washing machine motors as i have like 15 good tested ones i can only list two at a time on ebay and well i produce then far faster then j can sell them.

  10. #66
    406Refining started this thread.
    406Refining's Avatar
    Last Online: Yesterday
    SMF Badges of Honor


    Member since
    Apr 2017
    Location
    Billings, MT
    Posts
    49
    Thanks
    138
    Thanked 44 Times in 19 Posts
    Quote Originally Posted by Earther View Post
    If a van full of parts where to be deluvered ti your frint steps would you be prepared to handle aomethjng like that. I have put out the good word about your dealings and that might not take me long to make happen seeung as im in denver. O and how about washing machine motors as i have like 15 good tested ones i can only list two at a time on ebay and well i produce then far faster then j can sell them.
    That is an excellent question. I was waiting for a question like this to come up. I can handle a shipment of that size! When were you planning to deliver? Regarding your question on front load washer motors: I do not buy them. Unfortunately they kept getting damaged in transit to my buyers. As a result I ended up dropping those from my buying list completely.

Page 4 of 4 FirstFirst ... 234

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook