**NEWS!! Updated August 18, 2015**

Quote:

---

Originally Posted by Longhairboy

I have a question on the scrap copper transistors. Are those the things attached to heat sinks? That you have to take a screw out of to remove a heat sink? I think it is but want to make sure

---

http://www.scrapmetalforum.com/e-was...ification.html

http://www.futurlec.com/Pictures/Pac..._TO220_150.jpg

Quote:

---

Originally Posted by Longhairboy

I have a question on the scrap copper transistors. Are those the things attached to heat sinks? That you have to take a screw out of to remove a heat sink? I think it is but want to make sure

---

Yes...sometimes they do have a screw in them attaching them to a heat sink. But not always.

Thanks, Mech, for posting the pic of the components.

Ken

Thanks Mech and Mud I was pretty sure thats what they were, but didn't want to cut a bunch of the wrong things off and send them to you

Hey folks, I've updated my price list with a few more items that folks have been asking for today.

Thanks to everyone for the increased interest in sending me material. I will process it as soon as possible once I receive it. Please include your name, address, preferred payment method, preferred payment address, and email address in the boxes you send to help me track your shipments and to let you know where I am in the process of completing the processing of your material.

Best,

Kenny

To all of you who have called me and a grumpy old man answered and may have even been rude to you, I am sorry. I transposed two of the numbers in my phone number. I have updated the number in the main part of this thread and am listing the correct number here.

If you call, I will either answer or return your call at my earliest convenience!! I apologize for any inconvenience I may have caused you....and the grumpy old man.

two 6 two three four nine 6495.

Best,

Kenny

I come across quite a few of these transistors also, they are copper with the plastic around the top. Are these acceptable??

http://i796.photobucket.com/albums/y...ransistors.jpg

https://sp.yimg.com/ib/th?id=HN.6080...=159&h=119&p=0

http://www.utsource.net/goods_files/...30130_9267.jpg

Quote:

---

Originally Posted by Mechanic688

I come across quite a few of these transistors also, they are copper with the plastic around the top. Are these acceptable??

---

Yes, Mech, those are acceptable.

Kenny

Quote:

---

Originally Posted by Mudlucky

To all of you who have called me and a grumpy old man answered and may have even been rude to you, I am sorry. I transposed two of the numbers in my phone number. I have updated the number in the main part of this thread and am listing the correct number here.

If you call, I will either answer or return your call at my earliest convenience!! I apologize for any inconvenience I may have caused you....and the grumpy old man.

two 6 two three four nine 6495.

Best,

Kenny

---

That "guy" told me $15.00 per pound price including shipping cost! LOL

Quote:

---

Originally Posted by hobo finds

That "guy" told me $15.00 per pound price including shipping cost! LOL

---

BUMMER! I'm sorry I gave everyone the wrong number, and I'm sorry I missed the chance to do business with you. Maybe there will be other chances.

It was thanks to a 18 year old who had the guts to write me a nasty gram in PM that I even found out. Oh, and the 18 year old made the trip and I bought his stuff. He was pretty happy in the end.

Mudlucky, is great to do business with very helpful and quick on replys...... especially with the ordeal i had for him........ he worked with me all the way.... will do business anytime with him.... thanks alot Mudlucky and for all your help.

Quote:

---

Originally Posted by kspry

Mudlucky, is great to do business with very helpful and quick on replys...... especially with the ordeal i had for him........ he worked with me all the way.... will do business anytime with him.... thanks alot Mudlucky and for all your help.

---

Thanks, Randy. It was great doing business with you as well. I look forward to the next time.

Kenny

Just a post to say thank you to everyone who has been sending me material or delivering material to me. I very much appreciate it!

Prices updated. Let's hope precious metals don't drop much more...

Ken

Hey folks,

I'll be updating prices soon. Most things look ok on my price list, but I know wire prices are down.

If you have questions, please ask in a pm, text or email. Email or text will get a quicker response.

I also buy dvi or VGA cables as well as power cords.

Mud

Hey Everyone, Thought It would be of everyones best interest to post my experience with Mr. Ken as an escrap buyer. I live sorta near him in illinois and had a little bit over 100 lbs of escrap from computers and tv's. I was really amazed because i called the cell number in the post on a saturday afternoon and he got back to me within an hour of me calling. Also, since I was going to be heading up to wisconsin in a few hours for my wifes roller derby game, I would be in the area to drop everything off at this place. He was very willing to have me drop on by after 7pm on a Saturday!! I left his place a tad after 8pm. The wife was of course a little "not surprised" that I happened to find some scrap related thing to break me away from her game, but since the timing worked out perfectly, I didnt get in too much trouble. It took about a half hour to sort through everything and he wrote every little item down on that sheet of paper to the .01 lb. If it was 2 cents, he added it up. Very accommodating, very worth while conversation, and he is growing/had a LOT of work in front of him (which is a good problem to have). I will certainly keep his information and any time I have a need to scrap some electronics, I will head to him! Thanks Ken!

Quote:

---

Originally Posted by khanb31

Hey Everyone, Thought It would be of everyones best interest to post my experience with Mr. Ken as an escrap buyer. I live sorta near him in illinois and had a little bit over 100 lbs of escrap from computers and tv's. I was really amazed because i called the cell number in the post on a saturday afternoon and he got back to me within an hour of me calling. Also, since I was going to be heading up to wisconsin in a few hours for my wifes roller derby game, I would be in the area to drop everything off at this place. He was very willing to have me drop on by after 7pm on a Saturday!! I left his place a tad after 8pm. The wife was of course a little "not surprised" that I happened to find some scrap related thing to break me away from her game, but since the timing worked out perfectly, I didnt get in too much trouble. It took about a half hour to sort through everything and he wrote every little item down on that sheet of paper to the .01 lb. If it was 2 cents, he added it up. Very accommodating, very worth while conversation, and he is growing/had a LOT of work in front of him (which is a good problem to have). I will certainly keep his information and any time I have a need to scrap some electronics, I will head to him! Thanks Ken!

---

Thanks, James. It was a pleasure doing business with you and meeting you.

Best,

Ken

I have some silver colored heatsinks from an HP Proliant rack server. I dont know the material but they seem to heavy to be aluminum. Would you buy them? I would post a picture but it wont let me yet

Quote:

---

Originally Posted by Ghost404

I have some silver colored heatsinks from an HP Proliant rack server. I dont know the material but they seem to heavy to be aluminum. Would you buy them? I would post a picture but it wont let me yet

---

Yes, I buy these. They are likely a Copper and aluminum heat sink. If you file, or deep scratch with a screw driver, you should see the copper color coming through. My prices for those are:

$0.75/lb Clean Cu/Al Heat Sink
$0.60/lb Unclean Cu/Al Heat Sink (unclean means that they have plastic or a ferrous/magnetic attachment.)

Thanks for the question. Please post or pm if you have additional questions.

Ken

Prices updated.

Also, I'm in the process of moving from my old 800 square foot warehouse to my new to me 3200 square foot warehouse! More information and pictures coming soon!

Thanks to everyone on SMF for all of your help and continuing to send me material. I've learned a lot and wouldn't have the business I do with out your help.

Ken

I'm still around and buying all sorts of material. I have expanded to a large warehouse to house my operation. Some of you locals have seen it. Feel free to stop by or send me material.

Also, most of my prices are listed above. Please note: I'm buying ribbon wire from computers with the ends still attached for $0.65/lb. You will see my large socket motherboard price at $2.80/lb.

Please let me know if you have any questions. You can PM me or the best contact is to email me. redemptionrecycling at gmail dot com

Kenny

I have a box of HDD Readers with the Copper Coil wire removed. still want? Reduced price of course