Buying functional RAM, CPUs, Graphics Cards, Laptops, and Desktops www.ibuy.parts

Hey All,

The Google Sheets that had my pricing is erased, and seems like someone is trying to pull down this post! Anyway, I am still alive and kicking. Please shoot me an email if you would like to discuss doing some sort and settles on your material. I have plenty of people here that have vouched for me. Trying to keep a sheet going with accurate pricing is just an exercise in futility for all the different line items. I would rather discuss once I either see your list or get a feel for your material.

-Danny

Ive got a whole box of GPUs that I have been hanging on too.... they are took good to scrap but not good enough for resale individually, mostly from business computers.

Any minimums on lot sizes of GPUs? I Probably have 30-50 of them

So far as I'm concerned, my own concerns have been properly addressed, good luck to you in your venture sir and thank you for fixing it.

I have temporarily taken down the site that I initially posted. As of right now I can provide pricing based on inquiries only. I will republish a revised site later this week.

Odd, Mr. Wolf. This isn't karma coming around a few years later, is it? :shrugs:

My offer for lunch still stands.

Good Afternoon All,

I have republished my website for anyone that wants to take a look at the pricing that I am offering. Thanks for your patience and the forum's understanding.

Quote:

---

Originally Posted by IamTheGreatest

Odd, Mr. Wolf. This isn't karma coming around a few years later, is it? :shrugs:

My offer for lunch still stands.

---

I don't recall any offer ever made. My shop is where it's always been and my phone number is the same as it always has been, if you know me as you've said before, then you already know how to get a hold of me I'm certainly not stopping you.

At any rate the reason is we aren't trying to purport one as another, and those who use our list in some or total capacity asked in advance to do so. I don't take issue with use I take issue when its implied that its ok to screenshot and repost as originals. OP fixed it, I'm happy with that. It's actually a google sites violation so they would have correlated the source on their own anyways. The algo google uses drops a pretty heavy hammer on that stuff.

I can confirm that an offer for lunch by Mr. Greatest was made many moons ago but I don't have time to dig up the thread

I took a stab in the dark and the offer is on page 13 of your buyers thread....I'm on my mobile and don't wanna try to copy and paste but it is there

I see it, and like has already been said, I know for a fact he knows my number and where my shop is, he wants to have lunch we have some good food in town. For respect purposes I am going to edit my original post so as not to reflect negatively when the OP took proper action and will not further clog their thread. Im rather impressed with the response and ultimately the kindness expressed in IMs.

Thank you very much for your understanding and I appreciate the kind words. I look forward to being an active, respectful, and transparent member of this community. I am of the opinion that there are plenty of slices of the pie for anyone at the table and we are all looking for the same thing in the end.

I am looking to buy i-series motherboards for more than scrap value. They do not have to be tested functional. I will buy the older boards with the H55 chipset for $2.50, and the newer boards with the H61, H81, and H110 chipsets for $4.50. Or, if you have boards with the X99 chipset (these boards normally take DDR4 RAM), I will buy them for $6.50.

I am also still interested in purchasing bulk quantities of RAM, CPUs, Desktops, and Laptops. Please visit I Buy Parts for pricing, or feel free to contact me directly.

I'm a bit confused on pricing.........At current pricing for motherboards this is basically scrap price and your hard drive pricing is confusing as well..........07 cents per 100 gb?..........so a 500gb is .35 cents each........Please clarify

You've caught my attention a little bit hear. How do we tell which chip set it is? What is considered damaged by visual inspection? Should metal sockets, heat sinks and batteries be left on or removed?

Good Morning Mike,

The HDD pricing is $.70 per 100gb not $.07.

And if you are getting $4.50/lb for P4 motherboards, please let me know who you are selling to and I would love to sell them my motherboard scrap!

For my last 2 lots of unsorted i-series motherboards my breakdown was VERY close to 5% H55 and the rest were H61, 81, and 110. The first lot was 5,097 motherboards and the second lot was 1,079 units. They were both so close to 5% that I use that as my benchmark for unsorted gaylords/pallets worth of i-series boards.

Quote:

---

Originally Posted by mthomasdev

You've caught my attention a little bit hear. How do we tell which chip set it is? What is considered damaged by visual inspection? Should metal sockets, heat sinks and batteries be left on or removed?

---

I can send you a picture of the cardboard visual aid that we use to teach these chipsets. If you want to shoot me an email at sales@ibuy.parts then I can send it over. I gave the picture to another forum member and he/she/they were very grateful. The pricing is not dependent on the removal of base metals (metal socket, heatsink) nor will I downgrade if the battery is still on the board. I understand that most will want to at least keep the main CPU heatsink for the Al, Cu, or AlCu value which is also totally fine with me. However, the smaller heatsink solely for the chipset is usually good to leave on because it protects the chipset during transit.

I also do RAM chip recovery and I tell scrappers ALL the time that leaving the heatshield on actually protects the chips and insures a safer delivery.

Quote:

---

Originally Posted by NewfromOld

Good Morning Mike,

The HDD pricing is $.70 per 100gb not $.07.

And if you are getting $4.50/lb for P4 motherboards, please let me know who you are selling to and I would love to sell them my motherboard scrap!

For my last 2 lots of unsorted i-series motherboards my breakdown was VERY close to 5% H55 and the rest were H61, 81, and 110. The first lot was 5,097 motherboards and the second lot was 1,079 units. They were both so close to 5% that I use that as my benchmark for unsorted gaylords/pallets worth of i-series boards.

---

Fair enough.....Sorry for misunderstanding but the boards you are looking for are not P4 they are newer boards correct?.........To me P4 boards means Pentium 4........Sorry I think we are trying to discuss the same things the pricing is just a little confusing the way it is listed........Alot of people buy the parts by the each and the scrap by the lb........You are buying even the reusable stuff by the pound I assume......It's all good thanks for any clarification

Quote:

---

Originally Posted by mikeinreco

Fair enough.....Sorry for misunderstanding but the boards you are looking for are not P4 they are newer boards correct?.........To me P4 boards means Pentium 4........Sorry I think we are trying to discuss the same things the pricing is just a little confusing the way it is listed........Alot of people buy the parts by the each and the scrap by the lb........You are buying even the reusable stuff by the pound I assume......It's all good thanks for any clarification

---

Hey Mike,

I'm using P4 interchangeably with "small or metal socket green board" as pictured on boardsort.com. "Mixed P4" is the category that we use when we sort them- either way, same price for scrap regardless. I am not buying by the pound. I am buying by the individual motherboard containing those chipsets.

Assuming the average motherboard weighs very close to 1lb, I could see the confusion when discussing scrap vs the price I am offering. I am most interested in buying things for more than scrap value, which is why I am buying a motherboard that contains a H55 chipset for $2.50, but the other three for $4.50. And if the same board has an X99 chipset, $6.50. So even though the weight has remained at that same 1lb constant, the price is changing based on the chipset. I hope that clarifies any confusion!

Thanks for asking
Danny

Thanks for clarification....remember your dealing with us scrappers and we may not be the sharpest knives in the drawer

Quite the contrary. I thought I was going to get reprimanded for rounding the weight of the motherboards to 1lb :-o

Did some business with Danny (NewfromOld) and the transaction was smooth and effortless. Good communications,
fast payout . Give him a try and hopefully your experience will be as good as mine.
Thanks Danny ....

Quote:

---

Originally Posted by Kalvlin

Did some business with Danny (NewfromOld) and the transaction was smooth and effortless. Good communications,
fast payout . Give him a try and hopefully your experience will be as good as mine.
Thanks Danny ....

---

I also did. Sent him a box of (what I thought) were crappy scrap only gfx cards I had been holding onto. Some of them had some pretty decent MTSV. Very impressed with the speed of sorting and payout, and also really liked the itemized list of items so I knew exactly what I got for what and know what to hang on to for next time.

Highly recommend Danny based on my experience thus far.

Thank you very much for putting your trust in me. Glad to hear that you were happy with the transaction and I look forward to continuing to work with you in the future!

Thank you for those kind words. I'm glad that you were happy with the interaction and I am also glad that I could provide the reporting you were interested in! Can't wait to see what gems you find next!

Happy Monday All!!! I hope your year is off to a strong start. I just updated the original post with pricing reflective of the 2022 trends we are seeing. Included a little bit of market projections from what my company has been tracking. In order to get top dollar- I would recommend liquidating any 6th generation i3 and i5 CPUs you might have been holding on to, expect to see a pretty big market correction on those guys at some point this year.

Hey all, I am still alive and kicking. Though not buying the same way that I used to. Seems that someone has been trying to shut down this thread as I just got a notice from the admins confirming that I wanted this thread deleted. Please shoot me an email at sales@ibuy.parts if you want to discuss pricing for your material.