Just a stubborn old goat

Ha You thought I was talking about you.
Well, not this time. LOL
I have this thing about stripping wire no matter what if it’s heavy enough. Well this time I got a little POed because the insulation was real tough PVC and even a new utility blade wouldn’t touch it.
Now here is the stubborn old goat part.
This wire was aluminum elec. Service lines. Not worth the time to strip but this stuff ticked me off . I am not one to be defeated by some ……of scrap.
So I got serious with it.

I made a makeshift table.
http://www.scrapmetalforum.com/attac...2&d=1426999880
Stretched the wire out thinking of a chicken neck,

http://www.scrapmetalforum.com/attac...3&d=1426999927
Gave it a good wack but went a little to deep.

http://www.scrapmetalforum.com/attac...4&d=1426999980

Now is this a little overkill for stripping wire or what.
http://www.scrapmetalforum.com/attac...5&d=1426999999
http://www.scrapmetalforum.com/attac...6&d=1427000028
That’s a 3” dual carbide spiral blade.
:&

Overkill forsure...............efective? Hell yeah!!

Stubborn can be good (in certain cases)!!! What's the main story (myth?) about Thomas Edison, that it took him a 1,000 tries at the light bulb??

If you can find an effective and fairly quick way to take off the heavy insulation and remove the steel wire core of ACSR (I think its either 5 or 6 Al strands around the single steel one?), it might be worth it. My non-ferrous guy is giving 56 cents for clean Al wire compared to a quarter a pound for ACSR

Then again the heavy insulation is about what, 40% of the weight?? If so 100 lbs. of straight ACSR would get ya $25 and 60 pounds of clean wire would yield $33.60. So the exact percentage of the insulation probably becomes fairly significant (and how fast the steel core strand can be removed). Good luck on whatever you do!!

Quote:

---

Originally Posted by DakotaRog

Stubborn can be good (in certain cases)!!! What's the main story (myth?) about Thomas Edison, that it took him a 1,000 tries at the light bulb??

If you can find an effective and fairly quick way to take off the heavy insulation and remove the steel wire core of ACSR (I think its either 5 or 6 Al strands around the single steel one?), it might be worth it. My non-ferrous guy is giving 56 cents for clean Al wire compared to a quarter a pound for ACSR

Then again the heavy insulation is about what, 40% of the weight?? If so 100 lbs. of straight ACSR would get ya $25 and 60 pounds of clean wire would yield $33.60. So the exact percentage of the insulation probably becomes fairly significant (and how fast the steel core strand can be removed). Good luck on whatever you do!!

---

Dakota
This wire didn’t have the center steel wire. It was 7 stands of 12 gauge Al only.
Printed on the insulation: (ALCAN B 2 AWG AL XLPE 600V
I only stripped about 35 feet to see if my planer would strip that nasty PVC. It worked OK but if I every use it again for stripping heavy insulation it will be for COPPER wire on a longer 2x10x12 board at least.
From the 35’ of Al wire I stripped I ended up with 2.5 pounds at .55 for clean EC Aluminum.
The rest of the wire is going in as Insulated!!!!!!
http://www.scrapmetalforum.com/attac...7&d=1427048308

Still as much as I've reduced coated wire to just CU or AL , The planer is an excellent idea , little depth gage adjustment and it's the best idea yet , heck you know how many doors I planed in my life & your idea never occurred to me .

Abuilder Fine Idea , hats off to you . I don't think it's over kill at all . Heck a low cost Harbor freight Planer will do fine .
the only draw back is keeping mess down as wood chips are biodegradable and casing chips are not .

As to steel core - once stripped cut at lengths of 2 or 3 foot then it's easy enough to untwist
I guess you could cut them at 2 or 3 foot first then watch your hands careful as you use planer on the workable sizes

CH
I called it overkill because of the size & weight of my planer. My planer is a Rockwell 653 versa planer, the Cadillac of door planers in it’s day. A smaller planer would have been a lot easier to handle that’s for sure. But without the horsepower and carbide blade I think a HF planer would self destruct if the blade got bound up in the wire.
:)

ya once I got tired of doing it by hand for most of my life I bought a electric stripper a few years ago now and it paid for itself in just a month or so and it eats it faster than I can supply it lol

ACSR is not usually insulated. It is the bare overhead primary wire. The triplex, etc. secondary or service wire does not need the steel reinforcement wire as the spans involved are generally shorter than primary. (I purchase for an electric cooperative.)

https://s-media-cache-ak0.pinimg.com...03c47e1e56.jpg

couldn't resist...title of a thead like this deserves a goat. ;)

Sirscrapalot - You gonna eat that? - A goat.

Quote:

---

Originally Posted by Sirscrapalot

https://s-media-cache-ak0.pinimg.com...03c47e1e56.jpg

couldn't resist...title of a thead like this deserves a goat. ;)

---

Oh Ya
You think so>:)

http://www.scrapmetalforum.com/attac...1&d=1424393799

“The basic difference between an ordinary man and a warrior is that a warrior takes everything as a challenge while an ordinary man takes everything as a blessing or a curse.”
― Carlos Castaneda

http://i59.photobucket.com/albums/g2...PirateGoat.jpg

Sirscrapalot - I got your goat.

I had some wire similar to that but was finally able to remove the insulation with a knife but it was still hard to do.

https://youtu.be/SIaFtAKnqBU

https://youtu.be/sXKn3ZmxEfs

Quote:

---

Originally Posted by Sirscrapalot

http://i59.photobucket.com/albums/g2...PirateGoat.jpg

Sirscrapalot - I got your goat.

---

SO
Besides crossbreeding goats with gawd knows what?????
What other strange things do you do on that sand bar of yours?????
:&

Fill an then empty my cooler of beverages.

;)

Sirscrapalot - Keeper of the traveling cooler. :p

http://i192.photobucket.com/albums/z...ge.jpg1_16.jpg

http://i192.photobucket.com/albums/z...ge.jpg1_17.jpg

http://i192.photobucket.com/albums/z...ge.jpg1_18.jpg

http://i192.photobucket.com/albums/z...ge.jpg1_19.jpg

ninja Goat
http://i192.photobucket.com/albums/z...ge.jpg1_20.jpg

LOL

I knew you wouldn't be far along.

Sirscrapalot - You would have seen this derailment coming but I used my Pirate ninja stealth skills.

HEY this is way out of order.
http://i192.photobucket.com/albums/z...ge.jpg1_17.jpg
http://i192.photobucket.com/albums/z...ge.jpg1_16.jpg

Why does the old Vbulletin Admin in me keep telling me that some of this thread is going POOF. LOL

http://wac.450f.edgecastcdn.net/8045.../GoatMeme5.jpg

http://media.tumblr.com/tumblr_mby63kHwSq1qery84.jpg

http://s2.quickmeme.com/img/97/97e0c...57c1828cbf.jpg

http://rs2img.memecdn.com/goat-fusion_o_1536961.jpg

http://www.billnotbob.com/wp-content...my-270x250.jpg

http://img.pandawhale.com/94157-baha...mgur-JTzc.jpeg

Who knew goats could be so **** funny.

Sirscrapalot - Love is not love, without a violin playing goat. - Julia Roberts

Quote:

---

Originally Posted by Sirscrapalot

LOL

I knew you wouldn't be far along.

Sirscrapalot - You would have seen this derailment coming but I used my Pirate ninja stealth skills.

---

http://i192.photobucket.com/albums/z...ge.jpg1_21.jpg

http://i192.photobucket.com/albums/z...ge.jpg1_22.jpg

Thread Hijacked - Check

Many silly photos posted - Check

Make Abuilder think twice before stepping into the ring with the Pirate an Ninja.. - To be Determined. (I'm thinking not..AB is a little nutty. ;) )

I blame all of this on uh, um..Sledge, yea that's it. It was all his master plan. *Cough* *Cough*

Sirscrapalot - Goat out! We're Closed!

Not a real big goat fan. The eyes freak me out. West River folks here call our "antelope" (pronghorns) "goats" and have disdain for them. A lot of the world eat a lot of goats. There's sort of a hierarchy of grazing animals depending on the quality of the land (the main meat animals, I'm not French so not including horses here or water buffalo, etc.). Cattle, sheep, and then goats. They can graze about anywhere and when there is no grass, they'll do this:

https://images.search.yahoo.com/imag...&hsimp=yhs-001

Back to the electrical wire, MM57, I appreciate your knowledge and you're probably right. I'm just reporting what my non-ferrous guy calls it. In one of the few times that I think they stuck it to me, I had stripped about 30 feet of whatever its called and took it in and they still just gave me 20 cents a pound for it because they claimed the center steel strand. I had just had a tooth yanked and wasn't real keen hauling the crap home and trying to take it part so I took what they offered. One of the guys there said that the insulation could be broken off if hit hard against concrete when it was really cold outside (like below zero). My bro had more of this stuff surface later that year (although newer heavier insulation than the old straight black stuff) so I tried it out. Mythbusters should have been there because there was no cracking this stuff beating concrete with it. Took that stuff in the way it was as well...

For those afraid to click links...I give you Dakota's addition to the goats.

Tree got your goat.

http://viralcircus.com/wp-content/up.../11/goats1.jpg

( I had to use a different link, other wouldn't post up right. )

To you folks reading this thread, for everything but goats...I apolgoize, for goat jacking the thread. I was just having some fun with AB, an then well we got carried away. :)

I will now stop posting pictures of goats...at lest here. ;)

Sirscrapalot - Goat! Goat! Goal!

Old goat

http://i192.photobucket.com/albums/z...1/image_7.jpeg