Nickel-chromium anyone?

I have been looking around the site and it seems no one has mentioned
Ni/Cr it is a very heat resistant alloy and thus used in heating elements.
From what I have read it is 90%/10- Ni/Cr.

I have been saving elements for a while now but yet to sell it. The yard that takes it is a road trip for me so I will hoard it for a while.

Elements that are strung on ceramic insulators are straight Ni/Cr.
Stove and oven type elements are insulated and should be cleaned to reveal the money maker inside!

This should help those of you getting appliances make a little extra cash ;)

When you say that stove and oven element should be cleaned,how do you clean them ? I took some this summer to my scrap and they told
me they were'nt worth more that light metal .06lbs.

Thanks

What rate are you selling nichrome for? Many yards don't take it for much more than stainless steel.

I will call and get a current market price on Ni/Cr Monday and let you know.
The elements I save come out of central ac/heat units and are bare wire not insulated. As far as insulated elements, such as stove or dryer, I can see were they don't offer much cash as they are mostly made up of a heavy coating but cleaned should be worth much more. It does have a higher percentage of Nickel then other alloys I see.

The actual wire( Ni/Cr) is pliable yet the outer insulating coating is brittle! A bit of hammer action should yield clean heavy Ni/Cr wire.

I only mention this because nickel is at $11.00 plus a pound these days. Come Monday I will have more info on it's value. and get back to you!

i have about 300lbs of weld mold 880s, wich i know are Chromium-nickel. can anyone tell me what the value of these are, and the best place and way to sell them as i have been holding onto them for years and dont want to get taken. any help would be greatly appreciated. thank you

I never did follow through and find out about the Ni/Cr, but I sure do have a lot now!

Nstunney that is a good question. I do remember seeing a link to a buyer of Nickel alloy posted here a while back. Where is Mechanic, he seems to find these old posts in no time. From here on in I will call him Search Master 688 !

yes i would love to find out the value if any of these old weld molds, my brother (rip paul) left a basement full of these i have had no idea what to do with them for so long, until the other day a family freind told me i should take them to a scrap yard as apparently nickel has a good value for scrap. But i am trying to find out about the Chromium Nickel. if you stumble upon any of those links or any other information please do let me know!

google search gave me this place
http://www.carbide-recycling.com/mic...ing/Nickel.php

InjunJoe,

Can you post some pics of examples of the elements you are talking about?

Thanks

I have several totes of elements. Wish I knew what to do with them.

Quote:

---

Originally Posted by Midnight

InjunJoe,

Can you post some pics of examples of the elements you are talking about?

Thanks

---

Yes I will asap. The ones I speak of are the heat wire that is strung on ceramic insulators that is suspended in front of a blower.

http://www.myhvacparts.com/store/med...-hendricks.jpg

Quote:

---

Originally Posted by lilo

When you say that stove and oven element should be cleaned,how do you clean them ? I took some this summer to my scrap and they told
me they were'nt worth more that light metal .06lbs.

Thanks

---

That's exactly it.

Some of you guys are all about getting every, single, tiny little piece of metal sorted out, but you have to compare your time vs. $ you will get.

From reading most of the forum, it sounds like you want the scrap yard to break it down to the penny, and it just doesn't work like that. I guess if you go to an e-processor, they might get into more depth, but at the yard, its steel, copper, alum, and stainless, and a couple more.

My yard takes those coils as stainless. Are they something different? ANd fr some of us part timers every penny does ad up. I for one put these elements in a bucket till I get it full then take it in. If you get an extra 2 cents a pound. thats 50 cents I didnt have before if I would have left it in the shred pile.

Quote:

---

Originally Posted by WeWillPrevail

and a couple more.

---

This would fall into such a group as the "couple more" I have a little over a hundred pounds of this. It's high in Ni as compared to stainless. Not just any yard takes this but the one that does will pay pretty well.

I know what you are saying about everyone wanting every penny for there scrap. You can't make chicken soup out of chicken feathers.

Quote:

---

Originally Posted by injunjoe

I know what you are saying about everyone wanting every penny for there scrap. You can't make chicken soup out of chicken feathers.

---

Lawdy lawdy!!

Quote:

---

Here is a website I found that buys nickle alloys. http://www.nialloys.com/nickel_alloy...kel_alloy.aspx Be good just for pricing I would think. It says $.75 / lb I would think you should be able to get more then copper price seeing nickle is worth alot more then copper.

---

Compliments of PTS,
http://www.scrapmetalforum.com/showt...ghlight=nickel

That link doesnt seem to be working for me. But it does if you just type www.nialloys.com

Quote:

---

Super alloys that have nickel of various content, the higher the nickel content the higher the scrap value, some nickel scrap is worth like $10.00 a pound.
Nickel is used in a lot of goods we use in everyday life. if you would like to know more here is a good place to start your research.
http://en.wikipedia.org/wiki/Category:Nickel_alloys
I have about 1000 lbs of Monel that i removed from a heat exchanger, I've mailed out a couple of samples and will do a follow up via telephone tomorrow to find out how much nickel is in the alloy and what price per pound I'm offered.
These high grade nickel alloys are everywhere in large and small amounts.
Regards
Gustavus

---

Compliments of Gus, The guru of many things,,

Thanks for finding the links.
Well I found this, "80% Ni-20% CR $6.11/ $5.86" .
That is a far cry from stainless steel prices!
It won't be much longer and I will have the 300 pound minimum.

I am sure I will be able to find a local buyer.

Thanks, have a old bottle cutter, been needing some NiChrome wire for it, now i know where to find it. I'll also be asking my yard if they buy it.

The last time I checked my was paying 2.00 per pound for Ni-Chrom But that was a while back.

i have been hoarding heating elements from electric stoves for about 2 years now,my yard buys the as brass as long as you remove the magnetic brackets that are on some of them.it got me thinking as i was pretty sure they were not brass i thought there may be something else they were doing with them.i done some research earlier this year and was told they were made of something called cooper nickel.ive been reading over the archives here all morning about them.and the general concensus is that the outside is something like stainless and the inner wire is a nickel alloy.at least thats what ive gathered .if anyone has found a good answer of exactly what to do with them id really like more info.at the moment i have almost unlimited free time and if i could sell the inner wire for a good amount i would start strip[ping the wire from them.any info on the subject would be greatly appreciated

Should have sold your nickel scrap back in '11 when prices were stable. Today 304 stainless is bringing less than most aluminum commodities at my yard.

my yard only gives 25 cents a pound on stainless,if i have a few hundred pounds i will threaten to haul it north and they will bump it up to 45 to 50 for me .so is the outside of the burners just regular stainless.and the inner wire is a high nickel alloy

Any update on the 80/20 from air handler heating coils? also Ive been keeping (and get a ton of) salt chlorine generators, and ive heard the sheets inside are nickel. I haven't torn one apart yet to shoot the plate with the "money gun" yet, but im curious if any of yall had any idea if it is and what the price may be. I would also like to sell the plastic housing which is pvc and has a decent amount of weight, especially with the quantity that I have

Here is a picture of some that I had previously hoarded. I had 2 buckets of this stuff salvaged from the heater portion of HVAC package units. I took it to a specialty yard that tested it with a gun and bought it as inconel. No idea what it is paying now but it paid really well a Couple years ago when I cashed this stuff in.

http://i97.photobucket.com/albums/l2...e/IMG_0930.jpg

Inconel: $1.50 - $2.50
Rockaway Recycling in New Jersey