I was just wondering how many other e-waste people don't (or can't) handle the computer cases and other steel when done. I am just getting started and do not have the room or truck / trailer to haul the cases to the Metal recycling center.
How many others give away the cases and metal after stripping the computer down?
Thanks
I haul mine in. You might want to talk to PTS or some of the other Denver members and see if you can work out a deal.
Not sure if this will help, but we use our forklift and a bunk (1000lbs) of 7/16 OSB board to crush the cases. It works really good and is suprising how many you can fit in a small place.
I wish I am working out of my garage and I drive a Cherokee, I the reason I ask if I am going to giving away more empty cases tomorrow or Sunday. Not a ton but around 12. 6 are from servers.Quote:
Originally Posted by SDSCRAP
I use my saturn economy box car to scrap and I am able to fit at least 25 cases if not more into my car. Not the best thing to do but I do get more money and cheap on gas....
I have one guy who's situation is similar.......I buy the cases for a few cents less than what I get in scrap from him and just throw em in the truck when I go the yard........I make a few bucks and he doesn't have to take his car to the yard..........someone will buy the cases other than the yard I guarantee it.......In this biz you can't just give away money
I dont know wheather your are paying for computers or not but if you are your also paying for the cases. Either way your giving away money. 20 cases is approx $30 worth of steel maybe more maybe less depends on the size.
Really. I shove it in my car and go to the yard once or twice a month just to get rid of the steel and low grade boards. Puts a few bucks in my pocket and clears up space. Why give it away?Quote:
Originally Posted by mikeinreco
You could smash them or cut them up with a grinder. I personally would not give them away.
you need to work on a little trailer
lol there ya go. Build a trailer out of computer cases
The last time I checked prices north of Denver it was $160 per ton. Figuring with the cases I have that comes out to $1.02 each = $20.40 les gas $5.35. That would only leave $15.05 for a 28 mile round trip and an hour driving time plus loading unloading and storage.Quote:
Originally Posted by CarolinaEwaste
Plus their hours suck cause I can only go Saturday's their busy day so add two trips through the scale line. Last time that was around 15 min each wait.
Those numbers just don't work for me. Unless my math is off its just not worth my time. So far all the computers have been free. And I have given about 4 loads away.
I wish somebody would make a deal even at 1/2 the scrap price I would work only with them. Dreams but not yet.
So I kind of feel I was helping out somebody else and they were freeing up some of the little space I have to work.
Well before you give the next load away tell the guy you want .30 to .50 for each case. You would get a little money and he would still do ok.Quote:
Originally Posted by twmart
Sounds like a good idea to me!!
I figure with the aluminum copper and PCB I am looking at 2 full loads now. My last one was about $450 that that was a bunch of motherboards.
Try making contacts with some of the other scrappers in your area, make them the offer of 2-3 empty cases for each complete computer they bring you.
I tracked down a local scrapper in my area a few months back and have been buying all of his computers since then, I picked up a load from him on Sunday, took all of my empty cases to the yard and got half of my money back.
Ill make it easy for you. Ill just buy them from you when you sell me the rest of your stuff. Ill come up with the truck and load it all up :)
Anybody know how many cases you can get in an 8' pickup bed? I'm getting ready to haul mine up to free up some room in the garage. I've got around 40 of them and trying to figure if I can get them all in one load. The trailer is loaded with stuff so can't use it.
Mick,Quote:
Originally Posted by Mick
I just had 44 desktops 3 servers and several blades and switches in the 8ft bed of my chevy and still had room for more.
hmm just got an idea we have this bobcat here, its not big enough to crush cars but maybe it will work good on cases, crush em with the bucket then run them over
Hey now there is a nice idea.Quote:
Originally Posted by PartTimeScrapper
What is the charge to pick up from me in 80020 or I25 exit 223?
PM if you don't want to post it here.
Sky is the limit with good stacking and straps :)Quote:
Originally Posted by Mick
PM sentQuote:
Originally Posted by twmart
Not a problem in an 8 ft bed. My brother and I shoved 60 into his once and I had to put 25 in my odyssey. Like PTS said if you have straps you could prob get 80 in there.Quote:
Originally Posted by Mick
depends on how small you smash them lol, Cinder block works great.Quote:
Originally Posted by Mick
are they 24 can cases, or 30 ?
24 cans in a case of beer, 24 hours in a day, coincidence, I think not.....lolQuote:
Originally Posted by Bear
days here must be longer than yours there
I get busy tearing things down and the time seems to fly by. Never enough hours in the day. Especially these dang short daylight winter months. Glad i have plenty of shop lights.
yeah, daylight saving times sux. End of this month they'll start getting longer though ; )
Care to sell me some of those extra hours you get there?Quote:
Originally Posted by Bear
If it was those cases I would make room and put everything else out..Quote:
Originally Posted by Bear
haha, i hope they wasn't empty ones
I can put anywhere from 900-1400 lbs of cases in a regular pick up box, although I scrap a lot of servers which have heavier cases. If PC tower cases only, probably it would be a bit less. And this is not stacking it too high either, just need to pack neatly.