Gold

Good Luck with it, hope you have a good run!

Originally Posted by legacy4k

Good Luck with it, hope you have a good run!

You must get plenty of magnetic motor start switches, relays and electric motor thermo protection devices, lots of silver contacts. I would think any relays and such used on a ship would expect other precious metals alloyed with the silver to combat the harsh environment.

Originally Posted by alloy2

You must get plenty of magnetic motor start switches, relays and electric motor thermo protection devices, lots of silver contacts. I would think any relays and such used on a ship would expect other precious metals alloyed with the silver to combat the harsh environment.

Sealed Unit/ AC compressors also have silver contacts that you can take off. plus any tubing on it are mostly copper so easy copper there also.

Originally Posted by alloy2

The silver on most contacts is just plated onto the button, just tumble the buttons and the silver wears off, use a magnet to pick out the iron filings, add the silver powder into a copper melt to make an anode. When you part the copper your silver stays behinds as cell slime's.

From the AC units any silver soldered joints will be a big source of copper for the anode which must be at least 96% copper by weight.

PM me your email and I'll forward a link to my cloud storage for some books I have in digital format, there you'll find the formula to make the necessary electrolyte for the copper parting cell and other types of cells used for purifying silver and gold.

We're not permitted to speak of such things as chemicals on this site, but you can join the gold refining forum which has some very knowledgeable members.

Here's a thread i started back in August, home built ultrasonic tank.

Another thread copper parting.

Thread on my hammer mill copper chops compressed into briquettes .

Another thread on my home made essential oil still.

Due to some reason its not possible to PM you, kindly if you can share your contact email or any other platform. I do also needed your help on pricing, so it will be helpful if you can PM me or share your contact info. Thank you!

Originally Posted by alloy2

You can get my email from this malformed url.

email.

I have emailed you, kindly check it when you are available. Thankyou

Originally Posted by legacy4k

I have emailed you, kindly check it when you are available. Thankyou

A.K. link sent, please inform once task has been accomplished.

Originally Posted by alloy2

Good luck and keep safe dude!!

Originally Posted by alloy2

A.K. link sent, please inform once task has been accomplished.

File folder has now been LOCKED,

No chemicals, used a few grams 50/50 solder as my collector.

There's enough gold on that sample that even the topside on this button is showing color, had I used a flux the bottom side would have turned out much nicer.

I have over a ton of this ore, briught back from my BC trip - living on a sail boat.

Just got an older Jaw crusher from a buddy on the Island, it's a 6 inch previously used for crushing bricks. Now my ball mill has a companion.

Very rich quartz, this will be my first extraction uaing KCN.

I have wondered a few times just how much GOLD and silver might be around my yard in the things I have piled up. But I'm a copper and nickle sort of person at heart.