So What First Got you into Scrapping?

**M923** · 08-19-2018, 02:20 PM

There may be other threads on this I haven't been able to find; if so, I am not offended at all if an admin/mod were to elect to merge this with such or move it to a different board/category.

What first peaked your interest in metal recycling? Let's hear your stories. I'm curious if there are general trends...

Here's my story: I grew up in rural Alaska. Was disposing of my refuse in less than environmentally responsible ways, but what else are you gonna do in such a situation? I was looking into what it would take to get our community to ship its trash out of there to someplace else.

Later, I got into old army trucks. Stories of these beasts being scrapped had me thinking "Can they even crush that thing?" Granted, I later considered cutting one up myself. So in a way, I was just curious to see the processing end of it. I'm one of those types who has always enjoyed watching "destruction" of any type, so the processing end fits in with that...

Anybody else have their stories?

**Proton** · 08-19-2018, 02:56 PM

Originally Posted by M923

There may be other threads on this I haven't been able to find; if so, I am not offended at all if an admin/mod were to elect to merge this with such or move it to a different board/category.

What first peaked your interest in metal recycling? Let's hear your stories. I'm curious if there are general trends...

Here's my story: I grew up in rural Alaska. Was disposing of my refuse in less than environmentally responsible ways, but what else are you gonna do in such a situation? I was looking into what it would take to get our community to ship its trash out of there to someplace else.

Later, I got into old army trucks. Stories of these beasts being scrapped had me thinking "Can they even crush that thing?" Granted, I later considered cutting one up myself. So in a way, I was just curious to see the processing end of it. I'm one of those types who has always enjoyed watching "destruction" of any type, so the processing end fits in with that...

Anybody else have their stories?

$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$

**JJinLV** · 08-19-2018, 03:21 PM

What Proton said. The plant I worked at got closed down and I couldn't find other work so scrap was a hustle to get by.

**Proton** · 08-19-2018, 04:27 PM

Originally Posted by M923

There may be other threads on this I haven't been able to find; if so, I am not offended at all if an admin/mod were to elect to merge this with such or move it to a different board/category.

Your obviously Gen X and want everything done for ya.

Bet you never even used the forum search feature, there are plenty of stories on how we got started or introduced into the scrap industry and its merits.

**jimicrk** · 08-19-2018, 05:11 PM

I started picking up soda/pop bottles when I was 7 or 8.

**Patriot76** · 08-19-2018, 08:35 PM

After retiring from my profession, I wanted to be my own boss. I was a millwright working my way through college and when a family member wanted a farm cleaned up I jumped at the opportunity. This project took over a year and I still have some large machinery to remove. The lifestyle, freedom, and challenges were addictive and the rest is history. This is my eighth year and I would not trade it for anything.

**M923** · 08-20-2018, 01:32 PM

Originally Posted by Patriot76

After retiring from my profession, I wanted to be my own boss. I was a millwright working my way through college and when a family member wanted a farm cleaned up I jumped at the opportunity. This project took over a year and I still have some large machinery to remove. The lifestyle, freedom, and challenges were addictive and the rest is history. This is my eighth year and I would not trade it for anything.

This is indeed...addictive! I can sense it already! What all do you still have to remove?

**HipoGear** · 08-20-2018, 01:52 PM

I spent two decades working in electronic security. The second one, I worked at a college in the lock shop and was also the backup locksmith. We used to toss all the retired keys into a 5 gallon bucket that we would turn in every few months for a nice little un-taxed pizza and beer money bonus.

**Kpgman** · 08-20-2018, 02:14 PM

My addiction started this past Jan. I was injured on the job. I pulled my bicep muscle right off the bone and it curled up towards my shoulder. After surgery I didn't have much to do so i watched YouTube videos. I came across someone melting brass and copper and putting it into molds. I was hooked, I bought a furnace. I had some scrap metal laying around and I took some things apart for the copper and brass. I had a good melting down metal. Then I realized I have to get rid of this other scrap. Went back on YouTube to see what to expect at a scrap yard. Then I was hooked. It was easy and fun. I never did cash in my brass or my copper. Maybe one day I will. Mostly light metal.

**SKWrapper** · 08-20-2018, 02:37 PM

How did I get started?

A late nite internet search for an after hours flexible part-time job besides Uber or Lyft. I have a career in IT and I cannot commit to a set schedule on weekends or after hours because of being on call periodically.

This was my thought process during the search after discovering there was a such thing as metal recycling besides aluminum cans... "What? I can just pick up free metal and drop it off and get $$ for it? No... where do I take it? Right down the street? There's 4 of them around me? People are always leaving free stuff on CL and on the sidewalk... I have a good running truck just holding the street down in front of my house, a newer dolly, straps and a bunch of tools including power tools.... an angle grinder, reciprocating saw, Dremel tool all from being a gearhead... it's as if I am supposed to do this after hours "

So I bought a new pair of leather gloves, gassed up the truck and started finding things... then I joined this forum shortly afterward.

**SKWrapper** · 08-20-2018, 02:51 PM

Originally Posted by Proton

Your obviously Gen X and want everything done for ya.

Are you an old crotchety fart? I'm just asking... and am joking.

Gen X'er

**Patriot76** · 08-20-2018, 02:55 PM

Originally Posted by M923

This is indeed...addictive! I can sense it already! What all do you still have to remove?

There are two combines, three tractors, three cars, and a chisel plow. At the time I only had a tub trailer that I built from an old stock trailer and could not load the heavy machinery. Someday I will get back over there to haul them out.

**btkr** · 08-20-2018, 04:44 PM

Back in my youth, my father suffered a heart attack. At that time there was little “public assistance.” After these funds ran dry, he had to support a family of four. We had a pickup truck. Some days he would come home with a load, some days he just came home with a few $, sometimes empty. I started to go with him. We drove around a lot looking for dump sites, slag piles, construction sites, abandoned buildings, or any where metals could be had. He told me if you have a truck you can always make money. Have had a truck pretty much always since.

I learned a lot at an early age probably being 8-10 yrs. old. Magnet, hand tools, hammer, chain, and truck were our tools. Knowing where to look , identification of metals,and sorting/processing(or not)were learned. Life lessons of Responsibility, integrity, hard work,knowledge, and perseverance were a valuable by product. He eventually found work and we still made our rounds on Saturdays.

In high school my 65 Impala served as a scrap truck as well as transportation. After it died, I bought a truck than and filled it every Sunday and Tuesday with curbco items, plentiful back then. Always had $. Been scrapping off and on ever since. Now scrap money goes into a kitty. In the past it was for necessities.

My dad passed away in 1981. I was 21 at the time. It’s amazing what you can learn from an immigrant with a 4th grade education. Thanks Dad. I love you.

Sorry got a little long winded.

**greytruck** · 08-20-2018, 05:37 PM

Heres how i started, I was going to to get gas and around the corner from my house was a pile of air ducts, conduit pipes and a braker box. I knew of 2 guys who scrapped, scrapper Dave and my buddy Goon. Thought i should bring it in and see what i get. Well i rounded up some other stuff and brought it to the place i brought my cans to as a kid with my mom. Got a whole $17. Figured i will do this again. So the next time i went i wanted to beat my $17 from last time. Next load i brought in was $36, Man was i so excited for $36. So i was hooked. 9 years later and still at it.

**KzScrapper** · 08-21-2018, 06:00 AM

I was a contractor for years and had made a few trips to the yard. After our youngest graduated I needed a break from building stuff and our suburb was having a Spring Clean Up where folks were stacking all kinds of material on the curb with much of it being metal. I spent several years relieving stress by breaking stuff and turning it into $$$ until I took a liking to the HVAC biz and now I fix, install and remove equipment...so I still get to the yard a couple times a month.

**SKWrapper** · 08-21-2018, 11:13 AM

Originally Posted by KzScrapper

our suburb was having a Spring Clean Up where folks were stacking all kinds of material on the curb with much of it being metal

Broomfield? <--- that's my guess. Erie? Westminster? Thornton? Having lived there I know Northglenn doesn't have that, well they have a spring cleanup but it's a "free dump day" twice a year and you have to haul it yourself not just set it out.

I understand if you don't want to post on this forum your more specific location.

**hobo finds** · 08-21-2018, 01:10 PM

As a kid cleaning up the desert buy our house, cans and bottles, then when I moved away from home started to scrap on my apartment balcony as people were tossing away good stuff. lost my job in 2009 so scrap got us buy for a few years as the prices were good. I will scrap until I die, I figure even when I am older and cant get to the scrapyard, I will put it out for other scrappers to get better than it going to the dump.

**Stargate1** · 08-21-2018, 05:59 PM

My story starts when I was assisting a friend of mine replace all the thermostats and exit signs in the church I attended when I lived in Panama City, Florida. Not only did I get all the junk wire (which was a large amount, 50+lbs), but there was an entire 1000' spool extra ordered. I received that as well. With it all being CAT3 cable, essentially telephone wire, I didn't bother to strip it. The Romex I got I did strip. I also got some copper pipe, copper connections, and brass plumbing bits. When I took it to the scrap yard, I made about $450. I was 9 y.o. at the time. Ever since then, I've been carrying on scrapping. About the same time, I realized electronics held more value than just simple metals. Been doing electronics since that point as well. I'm 19 now, and absolutely love what I do. Working at a computer repair shop also helps bring in junk electronics on a weekly basis.

**KzScrapper** · 08-22-2018, 06:07 AM

Originally Posted by SKWrapper

Broomfield?

Little further south by the controversial G Line...they have stopped doing the clean up now because it was costing too much money to get the junk to the landfill.

**406Refining** · 08-22-2018, 10:42 AM

My story started when I was a little tot. I've been scrapping since I was 6 or 7 years old. My family owned an electronics manufacturing facility. As a result I got a lot of wire, components, and circuit boards. It became a very small hobby for the next several years until about a year and a half ago when I really started pushing hard on the scrap steel side of things and running it more like a business. After that first year and 33,000 pounds of metal I realized that there was serious competition in my area for scrap and it didn't make sense to compete for $15 per truckload so I started looking into appliance parts. It started small with just dishwashers and microwaves, but very quickly expanded to washer and dryer parts. I now do very little with scrap and deal mostly with appliance parts and similar items. A lot has changed in the past 2 years, but the new direction is looking to be a good path to take for years to come.

So What First Got you into Scrapping?

Thread Tools

Search Thread

Display

So What First Got you into Scrapping?

The Following User Says Thank You to M923 for This Post:

The Following 4 Users say Thank You for This Post by Proton:

The Following 2 Users say Thank You for This Post by JJinLV:

The Following 3 Users say Thank You for This Post by jimicrk:

The Following 5 Users say Thank You for This Post by Patriot76:

The Following User Says Thank You to M923 for This Post:

The Following 3 Users say Thank You for This Post by HipoGear:

The Following 4 Users say Thank You for This Post by Kpgman:

The Following 4 Users say Thank You for This Post by SKWrapper:

The Following 2 Users say Thank You for This Post by SKWrapper:

The Following 6 Users say Thank You for This Post by btkr:

The Following 4 Users say Thank You for This Post by greytruck:

The Following 3 Users say Thank You for This Post by KzScrapper:

The Following 2 Users say Thank You for This Post by hobo finds:

The Following 4 Users say Thank You for This Post by Stargate1:

The Following User Says Thank You to KzScrapper for This Post:

Similar threads on the Scrap Metal Forum

New to scrapping, how to optimalize profit scrapping PCs

new to scrapping, looking for some guidance on e-scrapping

Need advice scrapping trailers! New to scrapping!

Thread Information

Users Browsing this Thread

Bookmarks

Bookmarks

Posting Permissions

The Scrap Metal Forum

SMF Recommended Links

SMF on Facebook and Twitter