Results 1 to 15 of 15
  1. #1
    ilyaz started this thread.
    ilyaz's Avatar
    SMF Badges of Honor

    Member since
    Sep 2010
    Location
    MD
    Posts
    425
    Thanks
    340
    Thanked 230 Times in 114 Posts

    Can I force HDD initialization past "an I/O device error"?

    Trying to format a Toshiba SATA 2.5" HDD. It's hooked up to my desktop via a USB SATA HDD adapter. Using standard WIn7 Sart->Computer->Manage->Disk Management

    It recognizes the drive but says it is not initialized. When I choose "initialize disk" and then either MBR or GPT, it tries then gives me "request could not be performed because of an I/O device error".

    Googled iy but found no solution. So maybe someone on this forum have had luck formatting a disk after en error like this. How did you do it? If I need to use some third-party software that's fine but I would prefer a free tool.

    Thx



  2. #2
    AuburnEwaste's Avatar
    SMF Badges of Honor

    Member since
    Jan 2012
    Location
    Metro Detroit
    Posts
    773
    Thanks
    32
    Thanked 976 Times in 413 Posts
    Try clicking on start>control panel>administrative tools>computer management>disk management. You should see the toshiba drive listed on on the bottom of the screen. Right click on it and click "new simple volume". Then click yes at the prompts, and it will create a new volume and format the disk. If your drive does not show up in disk management, or will not format correctly, it is probably a bad drive.

  3. #3
    ilyaz started this thread.
    ilyaz's Avatar
    SMF Badges of Honor

    Member since
    Sep 2010
    Location
    MD
    Posts
    425
    Thanks
    340
    Thanked 230 Times in 114 Posts
    Quote Originally Posted by AuburnEwaste View Post
    Try clicking on start>control panel>administrative tools>computer management>disk management. You should see the toshiba drive listed on on the bottom of the screen. Right click on it and click "new simple volume". Then click yes at the prompts, and it will create a new volume and format the disk. If your drive does not show up in disk management, or will not format correctly, it is probably a bad drive.
    This is the same disk management tool I was using. If a disk is not initialized, you can't create a volume. This is precisely my problem. Maybe the disk is bad but I am wondering if, maybe with a more advanced disk management tool, or some other trick, I can get it initialized.

  4. #4
    Scrappah's Avatar
    SMF Badges of Honor



    Member since
    Jun 2014
    Posts
    1,058
    Thanks
    320
    Thanked 1,419 Times in 676 Posts
    It's more likely that the drive is bad but you might check a couple of things:

    The older IDE drives would draw power from the USB but SATA drives seem to need a separate power supply. My understanding is vague but i think it's got something to do with drawing some kind of signal voltage that isn't available at the USB port.

    The HP's & Compaqs are a little odd in the way they arrange their USB setup. Best guess is that it's got something to do with the driver for the USB hub ? Anyway .... try plugging the SATA adapter into one of the USB ports on the back of the machine and see if it behaves differently. ( That's assuming you're running a tower. )

    Sometimes the error messages will mislead you.

    ETA: Always make sure that the green board on the HDD is pointed up. You don't want it face down on a metal surface because it could cause a short circuit and damage the drive.
    Last edited by Scrappah; 10-17-2014 at 08:11 PM.

  5. #5
    SMF Badges of Honor



    Member since
    Jul 2011
    Location
    Jacksonville, NC
    Posts
    4,917
    Thanks
    15,632
    Thanked 5,861 Times in 2,713 Posts
    An alternative that I use is Ubuntu and hard drive managment tool programs that are free using that OS. If you are unfamilar with UBuntu look it up on youtube. If you additional interest send me a pm. Mike.
    "Profit begins when you buy NOT when you sell." {quote passed down to me from a wise man}

    Now go beat the copper out of something, Miked

  6. The Following 5 Users say Thank You for This Post by miked:


  7. #6
    PartTimeScrapper's Avatar
    SMF Badges of Honor



    Member since
    Aug 2011
    Location
    Morrison, Colorado
    Posts
    3,400
    Thanks
    1,004
    Thanked 3,256 Times in 1,335 Posts
    Its a bad drive. The I/O error stands for input / output meaning the drive can be seen as a drive but the info the computer needs to know its size and what not is damaged. This is usually a bad board on the drive. the drive itself could still be good. Thats why you see people buying just the boards on ebay. If this happened and you had info on the drive you needed to recover the first thing you would do is replace a board with this error. Hope that helps.

  8. The Following 3 Users say Thank You for This Post by PartTimeScrapper:


  9. #7
    matador's Avatar
    SMF Badges of Honor

    We purchase laptop computers and many components for greater than scrap value. We offer a shipping reimbursement program.replies

    Member since
    Nov 2013
    Location
    Big Wonderful Wyoming
    Posts
    2,310
    Thanks
    1,813
    Thanked 3,204 Times in 1,450 Posts
    I always use Linux for this. This software costs $10 now, but I have the old, free version. If you want, you could add the packages into Ubuntu. But, if you're not too familiar with Linux, Parted Magic is well worth the $10.

    You'll be using the Disk Health program to run a test on the disk, the Disk Erase program for wiping data, and the Partition Editor for creating partitions. It'll run on an older Pentium 4 PC just fine. I'd go this way.

    The drive that you're looking at is probably damaged, though.

  10. The Following 2 Users say Thank You for This Post by matador:


  11. #8
    ilyaz started this thread.
    ilyaz's Avatar
    SMF Badges of Honor

    Member since
    Sep 2010
    Location
    MD
    Posts
    425
    Thanks
    340
    Thanked 230 Times in 114 Posts
    Quote Originally Posted by matador View Post
    I always use Linux for this. This software costs $10 now, but I have the old, free version. If you want, you could add the packages into Ubuntu. But, if you're not too familiar with Linux, Parted Magic is well worth the $10.

    You'll be using the Disk Health program to run a test on the disk, the Disk Erase program for wiping data, and the Partition Editor for creating partitions. It'll run on an older Pentium 4 PC just fine. I'd go this way.

    The drive that you're looking at is probably damaged, though.
    I am quite comfortable with Linux. One question is whether it will recognize the external USB harddrive adapter that I use to hook up drives for testing and wiping.

    So are you saying that the Linux tool is free and for Windows it's $10?

  12. #9
    matador's Avatar
    SMF Badges of Honor

    We purchase laptop computers and many components for greater than scrap value. We offer a shipping reimbursement program.replies

    Member since
    Nov 2013
    Location
    Big Wonderful Wyoming
    Posts
    2,310
    Thanks
    1,813
    Thanked 3,204 Times in 1,450 Posts
    Linux should recognize your external enclosure.

    My description was pretty bad in the last post. My bad. The tool (Parted Magic) isn't available for Windows. It's a Linux OS on a CD or Flash Drive. It's complete with a desktop window manager (Xvesa or Xorg?) and certain packages. It's basically like Puppy Linux or any other compact distro. It just comes with programs to help with formatting and checking hard drives.

    The free way is what I'm working on: I have a Pentium D PC with both IDE and SATA ports. I have a SATA hard drive that I'm installing Xubuntu on. Within that OS, I'm reinstalling the packages that are in Parted Magic. Basically, I'm building his OS. It's a lot of time spent to save $10. But, I'm really cheap, and it gives me a project for the next slow day.

    Parted Magic is just an OS. Just burn the ISO onto a DVD, and plop the disk in the computer. Nothing needs to be installed to a hard drive. I do caution against using Parted Magic in a PC that serves another purpose. It would stink to wipe the wrong drive

    Is there a brand on the hard drive adapter? Mine worked in Parted Magic, but mine may be a different adapter.

    One tip I learned after the longest time: You don't have to use a USB adapter to run a SATA laptop drive in a desktop. They will hook right into the standard SATA cable, and the SATA power supply connector. I felt like a genius the day that I discovered that!

  13. The Following 2 Users say Thank You for This Post by matador:


  14. #10
    SMF Badges of Honor



    Member since
    Jul 2011
    Location
    Jacksonville, NC
    Posts
    4,917
    Thanks
    15,632
    Thanked 5,861 Times in 2,713 Posts
    I do use Parted Majic in a tower that was built to test HDD's and has Ubuntu for the OS. In addition to Ubuntu I have Windows 7 installed and choose which OS to use at start up.

    Matdor is VERY correct I have to double check before I start working on a drive so I don't mistkenly screw up the tower drive.

    On this tower I do have to use a USB adapter to test IDE HDD's so the answer to your question is yes Parted Majic will work with a USB adpter for IDE or SATA drives. Mike

  15. The Following 2 Users say Thank You for This Post by miked:


  16. #11
    Scrappah's Avatar
    SMF Badges of Honor



    Member since
    Jun 2014
    Posts
    1,058
    Thanks
    320
    Thanked 1,419 Times in 676 Posts
    Reason it through though .........

    If you plug in a drive and it works correctly it's all good to test & wipe.

    If you plug it in and it doesn't work it's broken. ( Broken HDD's are fiendishly difficult to repair.)

    Why get bogged down in it ?

    If you do any amount of scrapping you'll eventually run across hundreds that you don't have to fuss with. Turn n Burn Baby !

  17. The Following User Says Thank You to Scrappah for This Post:


  18. #12
    t00nces2's Avatar
    SMF Badges of Honor


    Member since
    Jul 2014
    Location
    Sarasota, FL
    Posts
    1,693
    Thanks
    1,187
    Thanked 2,341 Times in 958 Posts
    I would second what Scrappah said. I would add that unless it is a 300GB+, I would not mess with it either.

    Scrappah, you from Maine?

  19. #13
    matador's Avatar
    SMF Badges of Honor

    We purchase laptop computers and many components for greater than scrap value. We offer a shipping reimbursement program.replies

    Member since
    Nov 2013
    Location
    Big Wonderful Wyoming
    Posts
    2,310
    Thanks
    1,813
    Thanked 3,204 Times in 1,450 Posts
    Quote Originally Posted by Scrappah View Post
    Reason it through though .........

    If you plug in a drive and it works correctly it's all good to test & wipe.

    If you plug it in and it doesn't work it's broken. ( Broken HDD's are fiendishly difficult to repair.)

    Why get bogged down in it ?

    If you do any amount of scrapping you'll eventually run across hundreds that you don't have to fuss with. Turn n Burn Baby !
    Bingo. I have very short leashes with hard drives. Less than 80GB? I take it apart. Doesn't work after I plug it in? Take it apart. Fails a Disk Health check? I take it apart.

    The only ones that get wiped and reused are large enough for use, work, and aren't likely to fail soon.

    Speed is key. I can get on to bigger and better drives (Pun intended).

  20. #14
    SMF Badges of Honor

    Member since
    Jun 2019
    Posts
    1
    Thanks
    0
    Thanked 1 Time in 1 Post

    ways to fix I/O device error

    You can try to change the transfer mode of the drive
    Step1. Press Win Logo Key + R and then type devmgmt.msc to open Device Manager.
    Step2. Now, expand IDE ATA/ATAPI controllers. Doing this will let you see a list of IDE ATA/ATAPI channels.
    Step3. Right, click on the channel to which the external drive is attached and then click on Properties. Usually, Secondary IDE Channel is used for the external hard drives.
    Step4. Now, click on PIO Only option from the labeled box Transfer Mode, it is for the device that represents the external hard drive on the Advanced Settings labeled tab. This device is usually set to 0.
    Step5. After this click on OK and close all the opened windows and restart the computer to check the drive.
    Hope it can help you.

  21. The Following User Says Thank You to lerupu for This Post:


  22. #15
    t00nces2's Avatar
    SMF Badges of Honor


    Member since
    Jul 2014
    Location
    Sarasota, FL
    Posts
    1,693
    Thanks
    1,187
    Thanked 2,341 Times in 958 Posts
    Quote Originally Posted by lerupu View Post
    You can try to change the transfer mode of the drive
    Step1. Press Win Logo Key + R and then type devmgmt.msc to open Device Manager.
    Step2. Now, expand IDE ATA/ATAPI controllers. Doing this will let you see a list of IDE ATA/ATAPI channels.
    Step3. Right, click on the channel to which the external drive is attached and then click on Properties. Usually, Secondary IDE Channel is used for the external hard drives.
    Step4. Now, click on PIO Only option from the labeled box Transfer Mode, it is for the device that represents the external hard drive on the Advanced Settings labeled tab. This device is usually set to 0.
    Step5. After this click on OK and close all the opened windows and restart the computer to check the drive.
    Hope it can help you.
    Thanks for the input, we are always happy to get another viewpoint or angle to pursue..... I know you can hear it coming.... But, this thread was pulled up from 2014 (does anyone even remember how old they were in 2014?). That HDD was probably tossed in the aluminum bin 5 1/2 years ago.

    Welcome to our forum.
    Last edited by t00nces2; 06-11-2019 at 06:42 AM.


  23. Similar threads on the Scrap Metal Forum

    1. Replies: 6
      Last Post: 03-23-2014, 04:03 PM
    2. Replies: 11
      Last Post: 07-08-2013, 03:11 PM
    3. Recycling aluminum beer cans vs "open container" laws?
      By dirtymoney in forum A Day in the Life of a Scrapper
      Replies: 22
      Last Post: 05-15-2013, 10:41 PM
    4. Replies: 3
      Last Post: 06-27-2012, 10:00 PM

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook