Page 1 of 2 12 LastLast
Results 1 to 20 of 22

New To Forum

| Introduce yourself
  1. #1
    Ilikeblueu2 started this thread.
    Ilikeblueu2's Avatar
    SMF Badges of Honor

    Member since
    Nov 2020
    Posts
    6
    Thanks
    1
    Thanked 0 Times in 0 Posts

    New To Forum

    Hey there scrappers. I am located in Monterey California , I am somewhat new to the scrapping world , I started scrapping during the pandemic, so I’ve been at it for a little over a year now. I have a good scrap yard I go to for all my scrap metal. However I’ve not once sold all my PCB’s that I have . I have a fairly large amount of boards , including a large collection of gold plated boards. If anyone can recommend the best buyer of PCB’s I would very much appreciate it. I’ve researched quite a bit of different companies that buy , but I haven’t gone thru with selling them yet due to being unsure .Any feedback I welcome.



  2. #2
    mikeinreco's Avatar
    SMF Badges of Honor


    Member since
    Dec 2011
    Location
    TENNESSEE
    Posts
    4,972
    Thanks
    1,257
    Thanked 5,023 Times in 2,350 Posts
    I'd say regulations are tough in California

  3. #3
    SMF Badges of Honor


    Member since
    Dec 2017
    Location
    Tucson AZ
    Posts
    361
    Thanks
    306
    Thanked 579 Times in 231 Posts
    Quote Originally Posted by Ilikeblueu2 View Post
    Hey there scrappers. I am located in Monterey California , I am somewhat new to the scrapping world , I started scrapping during the pandemic, so I’ve been at it for a little over a year now. I have a good scrap yard I go to for all my scrap metal. However I’ve not once sold all my PCB’s that I have . I have a fairly large amount of boards , including a large collection of gold plated boards. If anyone can recommend the best buyer of PCB’s I would very much appreciate it. I’ve researched quite a bit of different companies that buy , but I haven’t gone thru with selling them yet due to being unsure .Any feedback I welcome.
    Small world I grew up in the Monterey area! Born at the County hospital lived in Salinas and Prundale until I was a teenager. I am sure with all the Tech coming out of silicon valley there are PCB recyclers in the area. If you can't find an actual scrap yard to buy them see if one of the other recyclers will buy them. At one point for about a year I was selling to another recycler that had chinese buyers. He would pay me not much under what he was getting just to pad his loads and make them happy by getting more product.

  4. #4
    SMF Badges of Honor


    Member since
    Dec 2017
    Location
    Tucson AZ
    Posts
    361
    Thanks
    306
    Thanked 579 Times in 231 Posts
    If all else fails I am taking a trip to Monterey this summer in my pick up truck. I'll buy your boards if you still have them at that point.

  5. The Following User Says Thank You to 520 for This Post:


  6. #5
    Ilikeblueu2 started this thread.
    Ilikeblueu2's Avatar
    SMF Badges of Honor

    Member since
    Nov 2020
    Posts
    6
    Thanks
    1
    Thanked 0 Times in 0 Posts
    Yeah that be great . If I haven’t found a place to send them off to by the time your in town, I’d be happy to sell them to you .

  7. #6
    Ilikeblueu2 started this thread.
    Ilikeblueu2's Avatar
    SMF Badges of Honor

    Member since
    Nov 2020
    Posts
    6
    Thanks
    1
    Thanked 0 Times in 0 Posts
    Hi, I’ve checked out your webpage before you even responded to my post. I just didn’t see anywhere it’s posted that I can ship to you. I did see pick up , but that was only i your state . I may have just missed where it was mentioned. Is that an option to ship ?

  8. #7
    mikeinreco's Avatar
    SMF Badges of Honor


    Member since
    Dec 2011
    Location
    TENNESSEE
    Posts
    4,972
    Thanks
    1,257
    Thanked 5,023 Times in 2,350 Posts
    Are you asking me?....If so yes I accept shipments just email me at mikeinrecovery32@yahoo.com to set it up thanks

  9. #8
    SMF Badges of Honor


    Member since
    Jun 2017
    Location
    Las Vegas
    Posts
    1,306
    Thanks
    3,232
    Thanked 1,922 Times in 785 Posts
    Quote Originally Posted by Ilikeblueu2 View Post
    Hey there scrappers. I am located in Monterey California , I am somewhat new to the scrapping world , I started scrapping during the pandemic, so I’ve been at it for a little over a year now. I have a good scrap yard I go to for all my scrap metal. However I’ve not once sold all my PCB’s that I have . I have a fairly large amount of boards , including a large collection of gold plated boards. If anyone can recommend the best buyer of PCB’s I would very much appreciate it. I’ve researched quite a bit of different companies that buy , but I haven’t gone thru with selling them yet due to being unsure .Any feedback I welcome.
    Hi and welcome to the forum from Las Vegas! If you check the Buyer/Seller section of the forum you can find a lot of circuit board buyers including myself! You've got responses already from great folks in this thread so hopefully you're covered already. But if not check that section and you can find pricing from lots of buyers.

  10. #9
    wildliferacer's Avatar
    SMF Badges of Honor


    Member since
    Nov 2013
    Posts
    173
    Thanks
    7
    Thanked 66 Times in 51 Posts
    Welcome to the forums!

  11. #10
    SMF Badges of Honor


    Member since
    Mar 2020
    Posts
    40
    Thanks
    0
    Thanked 16 Times in 10 Posts
    Warmest welcome!

  12. #11
    Ilikeblueu2 started this thread.
    Ilikeblueu2's Avatar
    SMF Badges of Honor

    Member since
    Nov 2020
    Posts
    6
    Thanks
    1
    Thanked 0 Times in 0 Posts
    Hi there I am curios if you still planned on coming out to the Monterey area this summer ?

  13. #12
    Ilikeblueu2 started this thread.
    Ilikeblueu2's Avatar
    SMF Badges of Honor

    Member since
    Nov 2020
    Posts
    6
    Thanks
    1
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by 520 View Post
    If all else fails I am taking a trip to Monterey this summer in my pick up truck. I'll buy your boards if you still have them at that point.
    Do you still plan coming to Monterey this summer ? If so maybe we can meet up if your still interested in buying my boards.

  14. #13
    SMF Badges of Honor


    Member since
    Dec 2017
    Location
    Tucson AZ
    Posts
    361
    Thanks
    306
    Thanked 579 Times in 231 Posts
    Quote Originally Posted by Ilikeblueu2 View Post
    Do you still plan coming to Monterey this summer ? If so maybe we can meet up if your still interested in buying my boards.
    Yes i'll be up in monterey in the middle of next month. Shoot me an email ripweed351 at gmail.com

  15. #14
    Ilikeblueu2 started this thread.
    Ilikeblueu2's Avatar
    SMF Badges of Honor

    Member since
    Nov 2020
    Posts
    6
    Thanks
    1
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by 520 View Post
    Yes i'll be up in monterey in the middle of next month. Shoot me an email ripweed351 at gmail.com
    K cool I shot you an email.

  16. #15
    SMF Badges of Honor



    Member since
    Apr 2015
    Posts
    2,075
    Thanks
    616
    Thanked 2,446 Times in 1,093 Posts
    Quote Originally Posted by Ilikeblueu2 View Post
    Hey there scrappers. I am located in Monterey California , I am somewhat new to the scrapping world , I started scrapping during the pandemic, so I’ve been at it for a little over a year now. I have a good scrap yard I go to for all my scrap metal. However I’ve not once sold all my PCB’s that I have . I have a fairly large amount of boards , including a large collection of gold plated boards. If anyone can recommend the best buyer of PCB’s I would very much appreciate it. I’ve researched quite a bit of different companies that buy , but I haven’t gone thru with selling them yet due to being unsure .Any feedback I welcome.
    Ewasted a forum member with a reputable reputation also buys PCB's

    Then you also have Board Sort, https://www.boardsort.com/


    Last edited by alloy2; 06-14-2021 at 08:08 AM.

  17. #16
    mikeinreco's Avatar
    SMF Badges of Honor


    Member since
    Dec 2011
    Location
    TENNESSEE
    Posts
    4,972
    Thanks
    1,257
    Thanked 5,023 Times in 2,350 Posts
    Boardsort oughta give you some kickback for this full page ad

  18. #17
    SMF Badges of Honor



    Member since
    Apr 2015
    Posts
    2,075
    Thanks
    616
    Thanked 2,446 Times in 1,093 Posts
    BOARDSORT.COM CURRENT PAYOUT RATES
    CURRENT AS OF 06-14-2021
    SELLER PAYS ALL SHIPPING COSTS
    All prices are subject to change without notice. We reserve the right to upgrade or downgrade any material
    Prices are per pound.


    CIRCUIT BOARDS CATEGORY

    Clean Gold Fingers $40.00
    Hard Drive Boards $13.00
    Cell Phone Boards $13.00
    Wire Wrap Pin Board $10.00
    Gold Cap Chip Board $7.00
    High Grade Telecom $5.75
    Large Multi Socket Server Motherboard $5.75
    CD-Rom Boards $5.00
    Gold Finger Card Clean NO Fan NO Sink NO Bracket $4.75
    Pin Board $4.50
    Laptop Motherboards $4.50
    Large Socket Motherboard $4.50
    Gold Finger Card NO Fan NO Heatsink WITH Bracket $4.45
    Low Grade Telecom $4.40
    Small Multi Socket Server Motherboard $3.25
    Metal Multi Socket Server motherboard $3.25
    Backplane Expansion Boards $3.25
    Peripheral High Grade $2.75
    Trimmed Finger Cards NO Fan NO Sink Bracket OK $2.75
    Low Grade Gold Finger Card WITH Fan or Heatsink $2.25
    Small or Metal Socket GREEN Motherboard $2.20
    Small or Metal Socket COLOR Motherboard $1.80
    Gold Finger Card with Oversize Heatsink or Fan $1.25
    Connector Ends $1.00
    Peripheral Low Grade $1.00
    Low Grade $0.50
    Mid Grade Board $0.50
    Auto Board Without Box $0.40
    Auto Board With Box $0.20

    RAM/MEMORY CATEGORY
    Gold Fingered RAM $22.00
    Silver Tin Fingered RAM $11.25
    Gold Fingered Shielded RAM $9.75
    Trimmed RAM $9.75
    Mixed RAM $6.00
    Blank RAM $2.00

    CPU & CHIPS CATEGORY
    Gold Cap Gold Leg 8086 IC $175.00
    386/486 Gold Cap $170.00
    Motorola Gold Top or Bottom $170.00
    LSI, NEC, Foreign Gold Cap $115.00
    Pentium Pro Gold Cap $110.00
    Double Side Gold CPU $110.00
    Cyrix/IBM/VIA Gold Capped $65.00
    AMD Ceramic No Metal $45.00
    Pentium/Mac Ceramic $45.00
    Black Fiber $43.00
    DLP Ceramic $30.00
    AMD Ceramic Aluminum Top K6 $26.00
    Slot Processor $16.00
    Flat Pack Gold Tab $15.00
    Green/Brown Fiber No Metal $15.00
    P4/Green Fiber With Metal $8.25
    DLP Metal Fiber $8.25
    Trimmed Slot Processor $8.00
    IC Chips - No Dallas Switches $8.00
    No Pin CPU $5.75
    Sun CPU $5.75
    Apple CPU $4.00
    Flat Pack No Gold Tab $2.00

    CELL PHONES AND TABLETS CATEGORY
    Older Cell Phone with Keypad No Battery No Back $5.75
    Wireless Handheld Keyboard Laser Scanner No Batt $4.75
    Modern Smart Phone No Batt No Cover $2.50
    Any Cell Phone With Battery $1.25
    Tablets $0.25
    IPod/MP3 Players $0.25

    BATTERIES CATEGORY
    Li-Ion Laptop Battery Taped No Swelling $0.50
    Li-Ion Cell Battery Taped No Swelling $0.35
    Lead Acid Battery $0.21
    Li-Ion Laptop Battery No Tape No Swelling $0.00
    Li-Ion Cell Battery No Tape No Swelling $0.00

    WHOLE SYSTEMS CATEGORY
    Whole Laptops (Non Working, Good Screen) $1.10
    Partial Laptops (Good Screen) $0.75
    Laptop with Broken Screen $0.60
    Whole Server With Hard Drive $0.45
    Whole Server No Hard Drive $0.35
    Whole Tower With Hard Drive $0.30
    Server Partial $0.28
    Whole Tower No Hard Drive $0.23
    Small Take Apart $0.15
    Docking Stations $0.02

    HARDWARE CATEGORY
    Tantalum Yellow and Black SMD $11.00
    Gold Plated Pins $5.00
    Hard Drive With Board $0.65
    Mixed Wire $0.60
    Power Supply With Wire $0.35
    Hard Drive Punched or Bent With Board $0.32
    Power Adapters With Wire $0.25
    Power Supply No Wire $0.25
    Hard Drive Platters $0.25
    CD/Floppy Disk Drives $0.20
    Hard Drive No Board $0.20
    Power Adapters No Wire $0.15
    DLP Projectors $0.10
    Hard Drive Punched or Bent No Board $0.10
    BATT. BACKUPS (Complete) $0.10
    BATT BACKUPS(INCOMPLETE) $0.06
    All In One Systems $0.05

    TEARDOWN CATEGORY
    Networking Equipement $0.40
    Cable/DVR Box With Hard Drive $0.20
    Office Phones $0.12
    Cable/DVR Box No Hard Drive $0.10
    Digital Camera $0.05

    METAL CATEGORY
    #1 Copper $3.75
    #2 Copper $3.60
    Silver Plated Brass $3.50
    Clean Copper Heatsink $3.25
    Red Brass $2.25
    Yellow Brass $2.00
    Clean Aluminum/Copper Heatsink $0.90
    CRT Yokes $0.50
    Clean Aluminum Heatsink $0.45
    Dirty Aluminum Copper Heatsink $0.45
    Lead $0.40
    Dirty Aluminum $0.35
    Stainless 304 Non-magnetic Steel $0.35
    MOTORS TRANSFORMERS $0.15
    Breakage $0.06
    Steel $0.03

  19. #18
    mikeinreco's Avatar
    SMF Badges of Honor


    Member since
    Dec 2011
    Location
    TENNESSEE
    Posts
    4,972
    Thanks
    1,257
    Thanked 5,023 Times in 2,350 Posts
    Lol....great job....have you had a personal experience with Boardsort or just trolling due to boredom?.....I don't care either way just trying to pass some time during heat of day until I can begin work again (have collapsed from heat exhaustion multiple times once behind the wheel)

  20. The Following User Says Thank You to mikeinreco for This Post:


  21. #19
    SMF Badges of Honor



    Member since
    Apr 2015
    Posts
    2,075
    Thanks
    616
    Thanked 2,446 Times in 1,093 Posts
    Quote Originally Posted by mikeinreco View Post
    Lol....great job....have you had a personal experience with Boardsort or just trolling due to boredom?.....I don't care either way just trying to pass some time during heat of day until I can begin work again (have collapsed from heat exhaustion multiple times once behind the wheel)
    Members often post what they get for shred and may even comment on which yards are trustworthy.

    It could be perceived that I'm trolling in truth would like our newest member to have a profitable sale and not one that would discourage him from continuing the trade.

  22. #20
    mikeinreco's Avatar
    SMF Badges of Honor


    Member since
    Dec 2011
    Location
    TENNESSEE
    Posts
    4,972
    Thanks
    1,257
    Thanked 5,023 Times in 2,350 Posts
    You didn't answer the question though....have you personally sold to Boardsort


  23. Similar threads on the Scrap Metal Forum

    1. New to the forum!
      By EdMraz in forum Introduce yourself
      Replies: 4
      Last Post: 10-19-2015, 11:33 PM
    2. This thead is a question - New to forum
      By cme135 in forum Introduce yourself
      Replies: 3
      Last Post: 04-25-2014, 02:25 AM
    3. New to the forum.
      By SergeantScrap in forum Introduce yourself
      Replies: 14
      Last Post: 11-30-2012, 05:46 AM
    4. Hello to forum
      By rooka21 in forum Introduce yourself
      Replies: 2
      Last Post: 08-22-2011, 09:43 AM

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook