Results 1 to 13 of 13
  1. #1
    CLRRRogue started this thread.
    CLRRRogue's Avatar
    SMF Badges of Honor

    Member since
    Dec 2015
    Location
    Southern Oregon
    Posts
    4
    Thanks
    3
    Thanked 11 Times in 3 Posts

    Finally found my place in the world!

    Hello,



    My name is Clay and I live in Southern Oregon. Ever since I was a child I was dumpster diving and recycling with my parents, it went on into college to save money. Unfortunately, I have taken a long absence from all life due to some mental disorders that can be debilitating at times so holding down a job has not been possible. But we need money to live. So a scrappers life for me i went back to my roots as treasure hunter. No matter how small the load it is always exciting to see what your gonna get. my only problem is that I have the mentality of, "well if it works or is good and can be used as is then why scrap it? I would really appreciate someone's opinion, in your experience is it more worthwhile to scrap working appliances, electronics and furniture or should I spend the time trying to sell older electronics and appliances on craigslist? What has been your experience.

    Anyways, I really enjoy working for myself and I needed almost no capital to get started, which is good because I am broke, I am borrowing a truck and have plenty of tools. The truck that I am using is tiny so I am saving up for (and looking for one free) then a bigger truck, business cards, etc. After three days of just getting free stuff on craigslist I am already turning more of a profit than I've made in years.

    I can jump into things overly excited, but I can say that I believe in all honesty and keeping sensibility in mind; This is my best shot to make it in life. there is so much to learn and I am very grateful to be a part of this cmmunity.

    Thank you so much and I hope to meet some friends,

    -Clay

  2. The Following 7 Users say Thank You for This Post by CLRRRogue:



  3. #2
    silversurfer's Avatar
    SMF Badges of Honor


    Member since
    Jan 2013
    Location
    Australia
    Posts
    39
    Thanks
    24
    Thanked 24 Times in 15 Posts
    Welcome from Australia. This forum is an education gold mine. Check all the threads on electrical appliances recycling because everything is there really. Nothing for it but hours of cruisy information gathering! You are coming in at a time of low prices but don't let that get you down. Just stay legal and stay safe!

  4. The Following 2 Users say Thank You for This Post by silversurfer:


  5. #3
    gabrielservices's Avatar
    SMF Badges of Honor


    Member since
    Aug 2012
    Location
    Carson city nv
    Posts
    152
    Thanks
    44
    Thanked 126 Times in 64 Posts
    Welcome from Northern Nevada! What sort of disability do you have, if you don't mind me asking. I have Aspergers Syndrome(High functioning autistic). I function well enough to get what I need to do done. But id prefer to be at home working. Its very crippling so I understand! We can talk more if you'd like when you can P.M. just contact me!
    Last edited by gabrielservices; 12-15-2015 at 05:09 AM.

  6. The Following User Says Thank You to gabrielservices for This Post:


  7. #4
    nutpie's Avatar
    SMF Badges of Honor


    Member since
    Feb 2014
    Location
    maine
    Posts
    441
    Thanks
    379
    Thanked 404 Times in 227 Posts
    If you have the space to store large appliances then hold on and sell as working.

  8. #5
    SMF Badges of Honor



    Member since
    Jul 2011
    Location
    Jacksonville, NC
    Posts
    4,917
    Thanks
    15,632
    Thanked 5,861 Times in 2,713 Posts
    Welcome to the forum and my I say: Well Said Silversurfer.

    Much of what you should do has to be determined by you. The forum's members have very different circumstances so what works for one may not be the best for you. By following Silversurfer's advise you will prepare yourself for opportunities you might not recognize had you not done so.

    Selling used stuff is a great way to make much bigger percentages and with the lower metals prices I think you should investigate them.

    Being a very experienced flea market seller I give you one bit of advise that will set you apart from many of the other sellers: Wash you items before you bring them!!!

    73, Mike
    "Profit begins when you buy NOT when you sell." {quote passed down to me from a wise man}

    Now go beat the copper out of something, Miked

  9. The Following 3 Users say Thank You for This Post by miked:


  10. #6
    SMF Badges of Honor



    Member since
    Apr 2015
    Posts
    2,078
    Thanks
    616
    Thanked 2,447 Times in 1,094 Posts
    Quote Originally Posted by CLRRRogue View Post
    Hello,

    My name is Clay and I live in Southern Oregon. Ever since I was a child I was dumpster diving and recycling with my parents, it went on into college to save money. Unfortunately, I have taken a long absence from all life due to some mental disorders that can be debilitating at times so holding down a job has not been possible. But we need money to live. So a scrappers life for me i went back to my roots as treasure hunter. No matter how small the load it is always exciting to see what your gonna get. my only problem is that I have the mentality of, "well if it works or is good and can be used as is then why scrap it? I would really appreciate someone's opinion, in your experience is it more worthwhile to scrap working appliances, electronics and furniture or should I spend the time trying to sell older electronics and appliances on craigslist? What has been your experience.

    Anyways, I really enjoy working for myself and I needed almost no capital to get started, which is good because I am broke, I am borrowing a truck and have plenty of tools. The truck that I am using is tiny so I am saving up for (and looking for one free) then a bigger truck, business cards, etc. After three days of just getting free stuff on craigslist I am already turning more of a profit than I've made in years.

    I can jump into things overly excited, but I can say that I believe in all honesty and keeping sensibility in mind; This is my best shot to make it in life. there is so much to learn and I am very grateful to be a part of this cmmunity.

    Thank you so much and I hope to meet some friends,

    -Clay
    Clay there's an old saying follow the money, the expression maybe interpreted in many ways.as a working man I'll give you my version.

    During one of our recessions long ago scrap prices were as they are now rock bottom, box top stores were no longer offering credit with 12 months or more before that first payment was due. People were struggling as most of us are now doing to put food on the table, they kept the family vehicle a few extra years, called in an appliance technician to repair a refrigerator, washing machine or dryer.

    It was during a similar time as we have now that I made some of the best money doing the least amount of work, I did no advertising my clients promoted me by word of mouth spreading the word. When I started repairing appliances I only sold what I had reconditioned from home,

    I did not foresee what the future held for me in that my home based business was now going to dictate my life into doing in home repairs. Funny how that works, anyhow by the time the business had taken over my ;life as I knew it, I had gained experience and confidence to go along for the ride.

    With our economy as it is now I see opportunity in this field..

    You a are not required to have an electricians ticket to work on anything having a cord with a plug just common sense. Domestic refrigeration falls into this class, leave the commercial hard wired stuff alone and you’ll do just fine.

    Welcome to the forum.

  11. The Following 3 Users say Thank You for This Post by alloy2:


  12. #7
    jimicrk's Avatar
    SMF Badges of Honor


    Member since
    Sep 2013
    Location
    Tennessee
    Posts
    2,825
    Thanks
    2,917
    Thanked 4,838 Times in 1,877 Posts
    Welcome to the forum Clay. There's a lot of great information here and a lot of great people also.

  13. #8
    CLRRRogue started this thread.
    CLRRRogue's Avatar
    SMF Badges of Honor

    Member since
    Dec 2015
    Location
    Southern Oregon
    Posts
    4
    Thanks
    3
    Thanked 11 Times in 3 Posts
    Wow! thank you all so much for the warm welcoming and priceless advice and wisdom. I honestly have never felt so welcomed by an online community. I'm real excited to learn all that I can to pay it forward as well.

    Silversurfer: thanks for the warm welcome from down under I put ethics above all else in this business, always leave the site cleaner than when you got there. And there is so much information here that I am rushing between reading and scrapping. It's a lot of fun.

    Gabriel Services: Thanks for opening up and I'll pm you. I like scrapping as a business because a just about anyone with mental problem will tell you, a "normal" job can be real tough in a lot of ways. And scrapping offers profitable freedom.

    Nutpie and Miked: thank you for passing along that advice. I truly appreciate it.

    Alloy2: Thank you so much for sharing your experience. I completely know what you mean about how life can take unexpected turns or throw us some rough time but if we work hard and seize the opportunity then we will succeed. Actually I have a lot of education and experience with all thing mechanical, electrical and plumbing. Plus having worked construction before, I've already gained some helpful experience. I think that if I throw myself into it and be open minded that I will certainly find my niche where I can enjoy the work and make some cash.

    jimicrk: thanks for the welcoming, I'll look around the forum for you.

    I have to be up early to pick up several truck loads of appliances so good night for now y'all.

  14. The Following 2 Users say Thank You for This Post by CLRRRogue:


  15. #9
    travistemple202020's Avatar
    SMF Badges of Honor


    Member since
    Jul 2012
    Location
    ames iowa
    Posts
    1,326
    Thanks
    267
    Thanked 883 Times in 495 Posts
    welcome from iowa

  16. #10
    Jonniebrass's Avatar
    SMF Badges of Honor


    Member since
    Dec 2011
    Location
    Massachusetts
    Posts
    1,007
    Thanks
    582
    Thanked 496 Times in 296 Posts
    Welcome from Massachusetts.
    Google first ask questions later!

  17. #11
    SMF Badges of Honor



    Member since
    Apr 2015
    Posts
    2,078
    Thanks
    616
    Thanked 2,447 Times in 1,094 Posts
    Quote Originally Posted by CLRRRogue View Post
    Wow! thank you all so much for the warm welcoming and priceless advice and wisdom. I honestly have never felt so welcomed by an online community. I'm real excited to learn all that I can to pay it forward as well.

    Silversurfer: thanks for the warm welcome from down under I put ethics above all else in this business, always leave the site cleaner than when you got there. And there is so much information here that I am rushing between reading and scrapping. It's a lot of fun.

    Gabriel Services: Thanks for opening up and I'll pm you. I like scrapping as a business because a just about anyone with mental problem will tell you, a "normal" job can be real tough in a lot of ways. And scrapping offers profitable freedom.

    Nutpie and Miked: thank you for passing along that advice. I truly appreciate it.

    Alloy2: Thank you so much for sharing your experience. I completely know what you mean about how life can take unexpected turns or throw us some rough time but if we work hard and seize the opportunity then we will succeed. Actually I have a lot of education and experience with all thing mechanical, electrical and plumbing. Plus having worked construction before, I've already gained some helpful experience. I think that if I throw myself into it and be open minded that I will certainly find my niche where I can enjoy the work and make some cash.

    jimicrk: thanks for the welcoming, I'll look around the forum for you.

    I have to be up early to pick up several truck loads of appliances so good night for now y'all.
    Your most welcome, with your aptitude in mechanics and class "A" personality I see a great future lays ahead for you.

    Doing in home repairs, I found if a dryer, washing machine or refrigerator had to be pulled away from a wall underneath you would always find the floor covered in lint and dirt electric ranges dirt and grease.

    The women of the house will show shock knowing she is living is such filth, anyhow I politely ask for the house vac then clean up the mess. The majority of women wont fight you for the vac

    Another thing to be careful when moving an appliance that has sat in the same spot for years because all that weight of the machine has made indents in the linoleum from which the machine should be lifted free from and not dragged which would possibly cause the flooring to tear.

    Meeting your customer for the first time contact is usually the customer calling you over the phone, now that you have secured the job when you greet the customer at the door say hello I'm Joe from GMA appliance the of the conversation is filler.

    You can be a scrap man and an appliance repairman at the same time, I'm cursed in that my eyes always wander taking in everything on one job fixing a dryer I could see an old John Deere farm tractor sitting just beyond where the home owner kept the grass cut and yard tidy. If the tractor had been a car you could see it was ripe for picking, the only thing that did not compute in my mind was why such a large tractor was sitting on such a small property.as it was obvious it had not been moved in years.

    Just like a magpie I wanted the tractor so I directed my conversation towards asking questions first commenting on wow what a cool tractor then is there something wrong with it ( remember first observation hasn’t moved in years ) The home owner opens up you can feel the love and sentiment pouring out in the conversation, they trucked the tractor to BC from a farm in Alberta to a larger property they owned in Langley which sold five years ago they kept the tractor moving it to the lot they now lived on but sentiment has since ebbed and they would like to see the tractor go to a good home. Jesus it's like their about to adopt out a dog to a good home and your credentials are being checked out before you can have custody.

    The tractor was a John Deere model 70 with a hand clutch, front end loader I picked it up two days later kept it for years and even used it on a scrap job. I had purchased 18 electric trolley bus's, I had Rypac drop a bin at my house loaded it with tractor welder and tools then had the bin delivered to the bus site some 75 miles east of my home.

    The trolley bus's were aluminum took me awhile to figure the best way to dismantle but the rewards were in the copper from the wiring, electric heaters ,electric motors, brass from the air brake system and air coolers.
    Last edited by alloy2; 12-16-2015 at 10:35 PM.

  18. The Following 2 Users say Thank You for This Post by alloy2:


  19. #12
    CLRRRogue started this thread.
    CLRRRogue's Avatar
    SMF Badges of Honor

    Member since
    Dec 2015
    Location
    Southern Oregon
    Posts
    4
    Thanks
    3
    Thanked 11 Times in 3 Posts
    Quote Originally Posted by alloy2 View Post
    Your most welcome, with your aptitude in mechanics and class "A" personality I see a great future lays ahead for you.

    Doing in home repairs, I found if a dryer, washing machine or refrigerator had to be pulled away from a wall underneath you would always find the floor covered in lint and dirt electric ranges dirt and grease.

    The women of the house will show shock knowing she is living is such filth, anyhow I politely ask for the house vac then clean up the mess. The majority of women wont fight you for the vac

    Another thing to be careful bout when moving an appliance that has sat in the same spot for years is that the weight of the machine has made indents in the linoleum from which the machine should be lifted free from and not dragged which would possibly cause the flooring to tear.

    Meeting your customer for the first time contact is usually the customer calling you over the phone, now that you have secured the job when you greet the customer at the door say hello I'm Joe from GMA appliance the conversation is filler.

    You can be a scrap man and an appliance repairman at the same time, I'm cursed in that my eyes always wander taking in everything on one job fixing a dryer I could see an old John Deere farm tractor sitting just beyond where the home owner kept the grass cut and yard tidy. If the tractor had been a car you could see it was ripe for picking, the only thing that did not compute in my mind was why such a large tractor was sitting on such a small property.as it was obvious it had not been moved in years.

    Just like a magpie I wanted the tractor so I directed my conversation towards asking questions first commenting on wow what a cool tractor then is there something wrong with it ( remember first observation hasn’t moved in years ) The home owner opens up you can feel the love and sentiment pouring out in the conversation, they trucked the tractor to BC from a farm in Alberta to a larger property they owned in Langley which sold five years ago they kept the tractor moving it to the lot they now lived on but sentiment has since ebbed and they would like to see the tractor go to a good home. Jesus it's like their about to adopt out a dog to a good home and your credentials are being checked out before you can have custody.

    The tractor was a John Deere model 70 with a hand clutch, front end loader I picked it up two days later kept it for years and even used it on a scrap job. I had purchased 18 electric trolley bus's, I had Rypac drop a bin at my house loaded it with tractor welder and tools then had the bin delivered to the bus site some 75 miles east of my home.

    The trolley bus's were aluminum took me awhile to figure the best way to dismantle but the rewards were in the copper from the wiring, electric heaters ,electric motors, brass from the air brake system and air coolers.
    Excellent tips and advice. Yes, you are the man! Great story about the tractor. Yesterday I picked up a bunch of working TV's from an older couple who were moving out to live in an RV. It was raining and my brother and I were just putting the TV's in the back of the truck. The man was getting really upset that these 20 year old TV's were getting wet. I ended up covering the truck bed in a tarp, but I removed the tarp when I found some more scrap around the corner. Having worked construction and as an apartment complex handyman, I always clean-up that grime under the old fridge or range, etc. Treating people well and leaving them with a positive experience always pays off.

    Alloy2, will you be my SMF hero? Anyways thanks again friend. You've opened my eyes to the opportunity of branching out to in-home repairs or wherever this business may take me. I need to always keep my eyes open and my brain working.

  20. The Following 2 Users say Thank You for This Post by CLRRRogue:


  21. #13
    SMF Badges of Honor



    Member since
    Apr 2015
    Posts
    2,078
    Thanks
    616
    Thanked 2,447 Times in 1,094 Posts
    Quote Originally Posted by CLRRRogue View Post
    Excellent tips and advice. Yes, you are the man! Great story about the tractor. Yesterday I picked up a bunch of working TV's from an older couple who were moving out to live in an RV. It was raining and my brother and I were just putting the TV's in the back of the truck. The man was getting really upset that these 20 year old TV's were getting wet. I ended up covering the truck bed in a tarp, but I removed the tarp when I found some more scrap around the corner. Having worked construction and as an apartment complex handyman, I always clean-up that grime under the old fridge or range, etc. Treating people well and leaving them with a positive experience always pays off.

    Alloy2, will you be my SMF hero? Anyways thanks again friend. You've opened my eyes to the opportunity of branching out to in-home repairs or wherever this business may take me. I need to always keep my eyes open and my brain working.
    Would you settle for an Internet mentor.

    I worked as a sub contractor for a pump and plumbing outfit for awhile as a pump repair guy.

    One day I was sent out on call the customer had no water. When I arrived the pump was still running but not picking up any water from the well, first thing I did was drop a sting down the well to find out where the water was.

    Basically there are three type of well pumps, the regular cheap one will only lift 21 ft and it struggles at this depth, then we have the jet pump which looks similar but has two lines going down the well, this style will lift 90 feet or more but is slow to fill the reservoir tank.
    then we have the submersible pump which is king of pumps.

    Pump one has one water line down the well.

    The Jet pump has two lines going down the well as water is pumped down the first line it goes through a venturi connected at the bottom of the two lines the magic takes place at the venturi as the pressurised water from the first line makes an abrupt turn around now heading upwards as it does this the water from line one now travelling upwards will siphon water from the well into another port on the venturi to be co-joined with the water sent down now travelling upwards.

    The submersible pump uses one line with power lines taped to it, this pump is capable of pumping water from great depths with efficiency.

    In my customers well the water table had lowered enough the pump could not lift, luckily he had a jet pump which was plumbed as a single line so he needn’t worry about the additional expense of buying a jet pump.

    I added the second line with a venturi, spent hours trying to get the system primed, then finally got the water I was hoping for, buttoned up the project gathered up my tools then handed my invoice over to the customer.

    About a week later this customer shows up at my home and hands me a 100 gift certificate for sears and a brand new pipe wrench. I asked him why and he said because you held your temper.
    Last edited by alloy2; 12-16-2015 at 11:02 PM.

  22. The Following User Says Thank You to alloy2 for This Post:



  23. Similar threads on the Scrap Metal Forum

    1. Found Silver in a weird place
      By AuburnEwaste in forum General Electronics Recycling
      Replies: 10
      Last Post: 03-23-2015, 12:32 PM
    2. haha found the right place hello from nj
      By njscrapper88 in forum Introduce yourself
      Replies: 0
      Last Post: 01-02-2014, 05:22 AM
    3. strangest place I've ever found scrap
      By gueroinchicago in forum A Day in the Life of a Scrapper
      Replies: 11
      Last Post: 04-18-2012, 03:16 PM
    4. Just found this place!
      By ScrapperStoke in forum Introduce yourself
      Replies: 3
      Last Post: 11-03-2011, 06:50 AM

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook