Results 1 to 9 of 9

Floor Plans

| General - Let's talk business
  1. #1
    davidatchets started this thread.
    SMF Badges of Honor

    Member since
    Jan 2020
    Posts
    5
    Thanks
    4
    Thanked 3 Times in 2 Posts

    Floor Plans

    Hey all! My first post here and I plan to be pretty active, so hello!

    I'm getting involved in a project to start up a new junkyard/used auto parts store. The first step for us is to build out the office space/customer servicing area. I was wondering if there were any blueprints/floor plans out there that anyone new of?



    Or if not, does anyone have any advice on the best way to build this out?

    Thanks!!
    David

  2. The Following 2 Users say Thank You for This Post by davidatchets:



  3. #2
    kss's Avatar
    SMF Badges of Honor


    Member since
    May 2019
    Location
    PA
    Posts
    839
    Thanks
    465
    Thanked 715 Times in 403 Posts
    No real advices on this.... but bigger is always better if you can afford it. My only limitations recently is the amount of space I have (well, and amount of time too, but mostly space).....

  4. The Following User Says Thank You to kss for This Post:


  5. #3
    davidatchets started this thread.
    SMF Badges of Honor

    Member since
    Jan 2020
    Posts
    5
    Thanks
    4
    Thanked 3 Times in 2 Posts
    Quote Originally Posted by kss View Post
    No real advices on this.... but bigger is always better if you can afford it. My only limitations recently is the amount of space I have (well, and amount of time too, but mostly space).....
    Thanks! Yah we are pretty limited with space, but will do our best to get the most out of what we have.

  6. The Following User Says Thank You to davidatchets for This Post:


  7. #4
    Patriot76's Avatar
    SMF Badges of Honor


    Member since
    Dec 2012
    Location
    Buffalo Commons
    Posts
    2,949
    Thanks
    10,589
    Thanked 7,220 Times in 2,256 Posts
    Welcome to the forum and I will echo the previous thread. A thought for you to consider is that I have never heard anyone complain that they wished they had built a smaller (house, shop, office, garage, etc.) I look forward to your contributions because of my interest in that type of business.
    Give back more to this world than we take.

  8. The Following User Says Thank You to Patriot76 for This Post:


  9. #5
    ChildhoodDream's Avatar
    SMF Badges of Honor



    Member since
    Mar 2015
    Location
    Minnesota
    Posts
    1,283
    Thanks
    1,664
    Thanked 994 Times in 527 Posts
    SPACE, the final frontier. These are the continuing adventures of the private salvage yard.

    Even though I have 10 acres, I'm always short on GOOD space for most everything.

    Always patching roofs and trying to keep the weather out of where I don't want it.

    I have been busy for years sorting through STUFF of all sorts and trying to get the "bottle necks" opened up. As I sure did haul the STUFF home over the many years with most of it still here.

    When limited on space for a building, you can always go 2 story if the laws and ordinances allow it.

    As for floor plans, I think places like Menards have computer set ups that are for designing floor plans and such. I think it's free to use if they still have it.

  10. The Following 2 Users say Thank You for This Post by ChildhoodDream:


  11. #6
    rc1530's Avatar
    SMF Badges of Honor

    Member since
    Jan 2019
    Location
    PA
    Posts
    22
    Thanks
    5
    Thanked 14 Times in 4 Posts
    My local yard that specializes in trucks and 4wd vehicles has about a 20 x 30 area to service customers, a 40 acre yard, and a few 50x100 buildings. Tight aisles, bins, and tagging everything is key. They mark a lot with yellow paint marker, which WD-40 will remove.

  12. The Following 2 Users say Thank You for This Post by rc1530:


  13. #7
    SMF Badges of Honor


    Member since
    Jun 2017
    Location
    Las Vegas
    Posts
    1,306
    Thanks
    3,232
    Thanked 1,922 Times in 785 Posts
    Very strongly suggest identifying your goals/specialities and designing your work and retail spaces around that rather than the other way around.

  14. The Following 3 Users say Thank You for This Post by JJinLV:


  15. #8
    hills's Avatar
    SMF Badges of Honor



    Member since
    Sep 2017
    Location
    Maine
    Posts
    1,359
    Thanks
    798
    Thanked 1,281 Times in 726 Posts
    Hey Dave !

    Welcome to the forum.

    I was in the building trades for 30 + years so i've got some background in this. I'm not really sure what you mean by a "build out". Some pictures would help.You need 10 posts here before you can post pictures but you could use an image posting site and provide us with links.

    Just some general suggestions:

    1: Check the stats for your area, but about 80 -90 % of the new business startups fail within the first five years. My best advise would be to start small and earn your way up. Warehousing is a PITA. It's a major headache to keep track of all the inventory. You would be better off to leverage a used parts supply chain till you are firmly established.

    2: Bigger isn't necessarily better. The bigger you are .... the bigger your overhead operating costs are likely to be. I look at it this way: You are sort of like a sparrow in a hurricane when you are running a new business. You are subject to the whim of economic mega forces that you have absolutely no control over.

    Most new business startups are fueled by borrowing. The bigger the initial debt, the bigger the debt service once you get up and running. The prudent course of borrowing would be to take on no more than 1/4 of what you think you can afford every month. Your business plan should have you positioned to have your debt completely paid off within the first five years. Most likely ... you will run into unforseen expenses and economic reversals that you couldn't have anticipated and will have to re-fi after the first 60 months.

    3: There's really no " one size fits all "approach to a business layout. Why not work with what you've got for awhile and see how it goes ? Experience would be the best teacher. That would tell you what you need once you become profitable.

    4: I can tell you from firsthand experience that anything construction related is an expensive proposition these days. Build outs, additions, renovations, and repairs to existing structures can easily run 2-3x the cost of new construction per square foot.

    The company that i'm currently working for has three buildings that are 50 + years old. Quite honestly, the company is in a predicament because it can't afford the maintenance & upkeep on these older structures. They're energy hogs,expensive to own, and are slowly falling into disrepair. The asset is depreciating at a very rapid rate. I'm hoping for the best, but the company's long term prospects don't look promising. On it's current track .... it's unlikely that the company will ever get out from under it's debt load. There's no sense in working for the bank. You're just a debt slave that way. It's a slipping down life.

    You might take an example from some of the successful big box & restaurant chains. They generally don't keep a building in service for more than 20 years or so. Build new and depreciate the asset over a 20 year span. That way you would have a tax writeoff that would help the bottom line.

    Probably more info than anyone would ever want but that does seem to be the reality of things.

    Again ... just generalities w/o knowing much about your own particular situation.
    Last edited by hills; 01-22-2020 at 01:35 PM. Reason: edited for clarity

  16. The Following 3 Users say Thank You for This Post by hills:


  17. #9
    davidatchets started this thread.
    SMF Badges of Honor

    Member since
    Jan 2020
    Posts
    5
    Thanks
    4
    Thanked 3 Times in 2 Posts
    Thanks everyone! I'll keep you updated on how it goes.


  18. Similar threads on the Scrap Metal Forum

    1. What's your plans for the year ahead
      By Jedimaster in forum A Day in the Life of a Scrapper
      Replies: 5
      Last Post: 01-21-2016, 10:44 PM
    2. Thanksgiving Day Plans?
      By pjost in forum Off Topic Discussions
      Replies: 19
      Last Post: 11-28-2014, 09:08 AM
    3. 4th of July plans?
      By Harland in forum Off Topic Discussions
      Replies: 12
      Last Post: 07-06-2012, 09:16 PM
    4. New Housing Plans
      By Geiser093 in forum Scrap Metal Spots
      Replies: 2
      Last Post: 05-30-2012, 09:05 PM

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook