Results 1 to 10 of 10

Pallet recycling

| General - Let's talk business
  1. #1
    mthomasdev started this thread.
    mthomasdev's Avatar
    SMF Badges of Honor


    Member since
    Apr 2012
    Location
    pittsfield, ma
    Posts
    1,300
    Thanks
    348
    Thanked 1,532 Times in 704 Posts

    Pallet recycling

    Testing the waters in another area. Too much on my plate already, but what the heck.

    I have a resort that I already get Ewaste from. They have about 70 pallets and get 15 to 20 a week. I have someone near me that picks them up, fixes what can be fixed and resells grade A and grade B pallets. Sounds like I can sell him unbroken ones for a couple of bucks a piece. It's not much money, but the resort is on my way home from work and his shop is right down the road. It also gives me access to pallets for my other recycling.


  2. The Following 5 Users say Thank You for This Post by mthomasdev:



  3. #2
    hobo finds's Avatar
    SMF Badges of Honor


    Member since
    Nov 2010
    Location
    tucson, az
    Posts
    4,746
    Thanks
    6,035
    Thanked 5,906 Times in 2,555 Posts
    Quote Originally Posted by mthomasdev View Post
    Testing the waters in another area. Too much on my plate already, but what the heck.

    I have a resort that I already get Ewaste from. They have about 70 pallets and get 15 to 20 a week. I have someone near me that picks them up, fixes what can be fixed and resells grade A and grade B pallets. Sounds like I can sell him unbroken ones for a couple of bucks a piece. It's not much money, but the resort is on my way home from work and his shop is right down the road. It also gives me access to pallets for my other recycling.
    I would do it even for $2 each
    Better than the dump!

  4. The Following 3 Users say Thank You for This Post by hobo finds:


  5. #3
    mthomasdev started this thread.
    mthomasdev's Avatar
    SMF Badges of Honor


    Member since
    Apr 2012
    Location
    pittsfield, ma
    Posts
    1,300
    Thanks
    348
    Thanked 1,532 Times in 704 Posts
    Quote Originally Posted by mthomasdev View Post
    Testing the waters in another area. Too much on my plate already, but what the heck.

    I have a resort that I already get Ewaste from. They have about 70 pallets and get 15 to 20 a week. I have someone near me that picks them up, fixes what can be fixed and resells grade A and grade B pallets. Sounds like I can sell him unbroken ones for a couple of bucks a piece. It's not much money, but the resort is on my way home from work and his shop is right down the road. It also gives me access to pallets for my other recycling.
    I dropped off 2 small loads today. 41 pallets in all. I'm getting paid for 29 unbroken pallets. Of the 12 remaining, 2 were a non-standard size (only deals in 40" x 48"). 1 was broken beyond repair. 9 were broken, but repairable. Looks like this will be a decent little regular pickup. Should be able to make an extra grand a year, picking up stuff on the way home from work. Once I get thru the initial pile and have a complete understanding of what is good, I'll start keeping some of the bad ones and either use them myself or possibly fix them. Not sure if $2 is worth it if I need to fix them, but we will see.

  6. The Following 4 Users say Thank You for This Post by mthomasdev:


  7. #4
    hobo finds's Avatar
    SMF Badges of Honor


    Member since
    Nov 2010
    Location
    tucson, az
    Posts
    4,746
    Thanks
    6,035
    Thanked 5,906 Times in 2,555 Posts
    Quote Originally Posted by mthomasdev View Post
    I dropped off 2 small loads today. 41 pallets in all. I'm getting paid for 29 unbroken pallets. Of the 12 remaining, 2 were a non-standard size (only deals in 40" x 48"). 1 was broken beyond repair. 9 were broken, but repairable. Looks like this will be a decent little regular pickup. Should be able to make an extra grand a year, picking up stuff on the way home from work. Once I get thru the initial pile and have a complete understanding of what is good, I'll start keeping some of the bad ones and either use them myself or possibly fix them. Not sure if $2 is worth it if I need to fix them, but we will see.
    I assume he takes the ones that need repair for free? If so you may as well just let them go to him, unless you have a few screws or nails to make a quick fix. Do you need to remove all pallets from the resort or will they let you be picky? I would probably take them all and dispose of the bad ones so they are getting a service from you...

  8. #5
    mthomasdev started this thread.
    mthomasdev's Avatar
    SMF Badges of Honor


    Member since
    Apr 2012
    Location
    pittsfield, ma
    Posts
    1,300
    Thanks
    348
    Thanked 1,532 Times in 704 Posts
    Quote Originally Posted by hobo finds View Post
    I assume he takes the ones that need repair for free? If so you may as well just let them go to him, unless you have a few screws or nails to make a quick fix. Do you need to remove all pallets from the resort or will they let you be picky? I would probably take them all and dispose of the bad ones so they are getting a service from you...
    I don't get paid for broken ones. As you said, I may just keep giving them to him.

    As far as the resort, I have to take all of them.

  9. #6
    Breakage's Avatar
    SMF Badges of Honor

    Member since
    Aug 2016
    Posts
    297
    Thanks
    242
    Thanked 273 Times in 149 Posts
    When I priced buying/selling pallets, $2 seemed to be the going rate.

  10. #7
    SMF Badges of Honor


    Member since
    Jun 2017
    Location
    Las Vegas
    Posts
    1,306
    Thanks
    3,232
    Thanked 1,922 Times in 785 Posts
    Around here I get either $2 or $2.50. Is one place pays $3 for some but it's not worth the drive with my capacity

  11. #8
    hills's Avatar
    SMF Badges of Honor



    Member since
    Sep 2017
    Location
    Maine
    Posts
    1,359
    Thanks
    798
    Thanked 1,281 Times in 726 Posts
    I was going through the used pallets at work today. We ship cardboard bales that weigh anywhere from 800 - 1200 lbs. We need something decent to bear all that weight. The thing i was looking for was a standard size hardwood pallet that was in good shape.

    The next thing was a hardwood pallet that had broken slats but could be repaired. They're easy to fix. Just take a sawzall with a fine tooth metal cutting blade and cut the nails. The slat pops right off. Take a slat from a donor pallet and nail it on with a nail gun that shoots the thin shank fencing nail.

    The badly broken ones where one or more of the three joists are broken go off to the burn pile at the dump. Same with any of the softwood pallets.

    A brand new HT hardwood pallet goes for 25.00$ or more. Used ones are worth around 7.50 $

    Just for the heck of it you might check out some of the warehouses that do a lot of shipping & receiving. You might find a buyer there. There are a couple on rt 91 and another on rt 90. Whole bunch on the South Shore around Boston but that's a longer drive.

    Might be a winner if you find a couple that would buy from you on a regular basis ?

  12. The Following User Says Thank You to hills for This Post:


  13. #9
    mthomasdev started this thread.
    mthomasdev's Avatar
    SMF Badges of Honor


    Member since
    Apr 2012
    Location
    pittsfield, ma
    Posts
    1,300
    Thanks
    348
    Thanked 1,532 Times in 704 Posts
    Quote Originally Posted by hills View Post
    I was going through the used pallets at work today. We ship cardboard bales that weigh anywhere from 800 - 1200 lbs. We need something decent to bear all that weight. The thing i was looking for was a standard size hardwood pallet that was in good shape.

    The next thing was a hardwood pallet that had broken slats but could be repaired. They're easy to fix. Just take a sawzall with a fine tooth metal cutting blade and cut the nails. The slat pops right off. Take a slat from a donor pallet and nail it on with a nail gun that shoots the thin shank fencing nail.

    The badly broken ones where one or more of the three joists are broken go off to the burn pile at the dump. Same with any of the softwood pallets.

    A brand new HT hardwood pallet goes for 25.00$ or more. Used ones are worth around 7.50 $

    Just for the heck of it you might check out some of the warehouses that do a lot of shipping & receiving. You might find a buyer there. There are a couple on rt 91 and another on rt 90. Whole bunch on the South Shore around Boston but that's a longer drive.

    Might be a winner if you find a couple that would buy from you on a regular basis ?
    Thank you for the advice. I'm going to stick with my buyer for the foreseeable future. He is literally on the same road as me, probably less than a half mile away. I don't have the time or a large enough trailer to consider selling to others.

  14. #10
    mthomasdev started this thread.
    mthomasdev's Avatar
    SMF Badges of Honor


    Member since
    Apr 2012
    Location
    pittsfield, ma
    Posts
    1,300
    Thanks
    348
    Thanked 1,532 Times in 704 Posts
    I finished the initial (plus what was added since i started) pile today. 75 pallets. I kept 4 for use at my shop and had 45 more that were good. After 3 loads, I have a good feeling for how much I'm comfortable putting on the trailer. Had 30 on the last load. I think I could comfortaby do 35. Now I'll have to wait a week or so and see how quickly they pile up. Looks like it will work out good. A little extra money for minimal effort.

  15. The Following 3 Users say Thank You for This Post by mthomasdev:



  16. Similar threads on the Scrap Metal Forum

    1. Pallet of towers
      By scrapping4ever in forum Auction Talk
      Replies: 3
      Last Post: 06-06-2013, 11:18 AM
    2. first pallet of servers from the ad :)
      By EcoSafe in forum General - Let's talk business
      Replies: 3
      Last Post: 03-26-2013, 03:06 PM
    3. Pallet Of Microwaves
      By Johnicek in forum General - Let's talk business
      Replies: 20
      Last Post: 10-04-2012, 04:20 PM
    4. Pallet jack
      By Copper Head in forum A Day in the Life of a Scrapper
      Replies: 7
      Last Post: 06-25-2012, 01:32 PM
    5. a pallet in a poke ??
      By Dumpster-Dee in forum General Electronics Recycling
      Replies: 18
      Last Post: 09-14-2011, 10:56 PM

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook