Page 1 of 2 12 LastLast
Results 1 to 20 of 39
  1. #1
    irondale started this thread.
    SMF Badges of Honor


    Member since
    Nov 2011
    Posts
    62
    Thanks
    26
    Thanked 14 Times in 9 Posts

    Need help with 3 semi loads of crt monitors,projection tvs

    An associate of mine lease is up on his warehouse.He has 3 semi loads of crt monitor,tube,and projection tvs to gt rid of. He has offered me to buy each piece for 40 cents.Im guessing each trailer has around 1200 units.He has his own trucks and will cover all shipping costs he said that he just needed a dropoff location.He told me that I can pay him after 2 weeks.He is in atlanta,Iam in jacksonville,fl.If anyone out there has the space and equiptment for something like this let me know.I would like to partner with someone on this,and we can come up with an agreement that will work for both of us.



  2. #2
    Mechanic688's Avatar
    SMF Badges of Honor



    Member since
    Mar 2011
    Location
    Warsaw , Ind. In the heart of the lakes, and down the street from the hotel where Al Capone stayed.
    Posts
    9,568
    Thanks
    11,247
    Thanked 10,730 Times in 4,728 Posts
    As hard as it is to get rid of the tubes he'll be lucky if someone doesn't charge him $5.00 each. No way I'd pay even .10 for TV's when I could get all I wanted off of Craigslist.

    With the copper prices being down there's not the money in them that there used to be.
    P & M Recycling - Specializing in E-Waste Recycling.
    If you enjoy your freedom, thank a vet.

  3. The Following 9 Users say Thank You for This Post by Mechanic688:


  4. #3
    logansryche's Avatar
    SMF Badges of Honor


    Member since
    Sep 2014
    Location
    Jamestown, TN
    Posts
    1,215
    Thanks
    1,043
    Thanked 564 Times in 367 Posts
    CRTs are still a scrappers worst nightmare and aren't worth moving or even attempting to move unless the price is right.

    The Foxy E-Scrapper
    Buy/Sell Thread: http://www.scrapmetalforum.com/scrap...ents-more.html


  5. The Following 2 Users say Thank You for This Post by logansryche:


  6. #4
    SMF Badges of Honor

    Member since
    Oct 2013
    Location
    Missouri
    Posts
    99
    Thanks
    18
    Thanked 82 Times in 45 Posts
    I would run away from that offer and not look back. Crt cost money to recycle properly. Most companies charge 20 to 40 cents per lb to recycle. Just figure 10 dollars a unit to recycle. You are talking about 36000 dollars to recycle the right away. Meaning it will cost you 36000 dollars . Not make you 36000.

  7. The Following 5 Users say Thank You for This Post by missouri:


  8. #5
    SMF Badges of Honor

    Member since
    Jul 2014
    Location
    Southern Pines, North Carolina
    Posts
    150
    Thanks
    89
    Thanked 303 Times in 82 Posts
    Don't do it. Take it from me, I've taken about 400 for free at one time. Never again. They are NOT worth it. CRT disposal fees are terrible. If anything, I would charge him $5 a piece.

  9. The Following 2 Users say Thank You for This Post by SteelMill:


  10. #6
    matador's Avatar
    SMF Badges of Honor

    We purchase laptop computers and many components for greater than scrap value. We offer a shipping reimbursement program.replies

    Member since
    Nov 2013
    Location
    Big Wonderful Wyoming
    Posts
    2,310
    Thanks
    1,813
    Thanked 3,204 Times in 1,450 Posts
    I wouldn't even touch them for $5 a piece. Your trucking them across state lines, which is a red tape nightmare. When you break them down, you have hazardous waste that is expensive and difficult to dispose of. No matter how rich your partner was, if I was in your place, I don't think he'd have enough money to get me to take that deal. If he did, he'd need deep pockets, though.

    If you want to recycle CRTs and TVs of that style, just offer free drop off. Two towns with 15k people total completely overflowed the collection bin at the local ReStore. I owned a 15' box van at the time. Volume wise, there was at least 10 loads there- at one time! If you really want CRTs and TVs, you can get them for free. I wouldn't pay for them!
    More than Scrap Value Shipment Tips: http://www.scrapmetalforum.com/scrap...tml#post242349

  11. The Following 4 Users say Thank You for This Post by matador:


  12. #7
    jimicrk's Avatar
    SMF Badges of Honor


    Member since
    Sep 2013
    Location
    Tennessee
    Posts
    2,826
    Thanks
    2,917
    Thanked 4,838 Times in 1,877 Posts
    RUN! Forrest RUN!

  13. The Following 10 Users say Thank You for This Post by jimicrk:


  14. #8
    SMF Badges of Honor


    Member since
    Nov 2010
    Location
    Boise, ID
    Posts
    2,702
    Thanks
    2,237
    Thanked 2,352 Times in 1,014 Posts
    Sounds like the beginning stages of those stories we read ever so often about abandoned warehouses full of CRTs. Either your associate is clueless, or he hopes you're stupid and plans to bend you over. There is NO WAY I'd take this deal. And he wants to charge you?!? Run from this as fast as you can.

  15. The Following 6 Users say Thank You for This Post by IdahoScrapper:


  16. #9
    sledge's Avatar
    SMF Badges of Honor


    Member since
    Nov 2012
    Location
    Central Indiana
    Posts
    2,717
    Thanks
    4,534
    Thanked 4,240 Times in 1,609 Posts
    I'm coming into the thread late.. but the answer has been covered.. Run.. Run like the WIND!!
    I'm so into scrapping.. When my Steel Toe Boots Wear out, I cut the Steel out of them and recycle the Toe!

  17. The Following 3 Users say Thank You for This Post by sledge:


  18. #10
    webuyselltradestuff's Avatar
    SMF Badges of Honor

    Member since
    May 2013
    Location
    Watkinsville, GA
    Posts
    950
    Thanks
    131
    Thanked 1,284 Times in 583 Posts
    ::waves hand:: this is not the ewaste you are looking for...move along..."

    Seriously, like everyone has suggested, this is stuff you CHARGE, not pay for. There is really NO worth even stripped due to time and disposal cost of the tubes.....if ti were LCD/LED TV's and they were damaged in shipping items AND you felt fine about doing massive reselling of the boards, then ok we could talk...

    Someone, somewhere is going to get screwed in this deal...watch from the next state with some popcorn
    PROFIT is made when you BUY/ACQUIRE NOT when you sell

  19. The Following 4 Users say Thank You for This Post by webuyselltradestuff:


  20. #11
    greytruck's Avatar
    SMF Badges of Honor



    Member since
    Jan 2012
    Location
    Thornton, Illinois
    Posts
    1,875
    Thanks
    1,641
    Thanked 1,736 Times in 896 Posts
    Go cut the cords off! LOL!!!!!!!!

  21. The Following 3 Users say Thank You for This Post by greytruck:


  22. #12
    webuyselltradestuff's Avatar
    SMF Badges of Honor

    Member since
    May 2013
    Location
    Watkinsville, GA
    Posts
    950
    Thanks
    131
    Thanked 1,284 Times in 583 Posts
    Quote Originally Posted by greytruck View Post
    Go cut the cords off! LOL!!!!!!!!
    Not worth the time or the backache these days LOL

  23. The Following User Says Thank You to webuyselltradestuff for This Post:


  24. #13
    bigburtchino's Avatar
    SMF Badges of Honor



    Member since
    Mar 2011
    Location
    California
    Posts
    1,647
    Thanks
    4,388
    Thanked 2,835 Times in 1,132 Posts
    Three semi loads of CRT's, that will become a "pain" and not a "gain" for you! As you live in Florida, I copied this one paragraph from Florida's Department of Environmental Protection, just to put the problem in perspective.

    By 2014, the market for recycled CRT glass has become limited. Very few new CRTs are being manufactured since flat panel displays have almost completely replaced CRT displays. The demand for CRT glass by lead smelters has also fallen sharply. Recycling markets for CRT glass are limited, costly and far away making CRT glass recycling a challenge to e-scrap recyclers. As a result, some e-scrap recyclers have been “stuck” with quantities of stored CRT glass for which they are hard-pressed to find cost effective, large
    quantity markets.


    ​That would be a lot of contaminated "LEAD GLASS" for you to pay for, with little if any financial gain. As everyone has suggested to you,Run away from that "associates" three semi loads of "LIABILITIES"!
    Last edited by bigburtchino; 10-27-2015 at 01:11 PM.

  25. The Following 3 Users say Thank You for This Post by bigburtchino:


  26. #14
    AdmiralAluminum's Avatar
    SMF Badges of Honor


    Member since
    Jan 2014
    Location
    Ontario
    Posts
    737
    Thanks
    824
    Thanked 968 Times in 415 Posts
    Find a way to get them to Canada! Still .08/lb here stripped of wire and yoke. Just turned in a big Sony for 14.00 plus I keep the yoke, Al heatsinks and wires from inside. The board only fetches .10/lb so its not worth the bother to pull it out.
    METAL IS MY MISTRESS...PLEASE DON'T TELL MY WIFE!

  27. The Following 3 Users say Thank You for This Post by AdmiralAluminum:


  28. #15
    SMF Badges of Honor


    Member since
    Nov 2010
    Location
    Indiana
    Posts
    273
    Thanks
    177
    Thanked 154 Times in 87 Posts
    I wouldn't take them for FREE. He wants to get rid of them for a reason, and its not to be a good guy. DO not take them, you will be stuck with 3 semi loads of the same stuff minus what you take out of it. Which will not cover what you paid for them. Listen to what everyone has said

  29. #16
    irondale started this thread.
    SMF Badges of Honor


    Member since
    Nov 2011
    Posts
    62
    Thanks
    26
    Thanked 14 Times in 9 Posts
    Thank you all for the advice. One of my plans was to get 1 trailer have him park it in one of those month to month trailer and rv parking places for around $100 or less/month,resale most if not all for $1-2 each to my fellow recyclers I have contact with in the area,I believe they would be happy to double or triple their money,plus this would spread the workload and disposal per person.In the past I have gotten a free 26ft boxtruck full and made about $600 ,that was about 6 months ago.It took me a week to finish by myself.Sold the plastic for 5 cents/lb,the unstripped low grade for 10-15 cents/lb ,copper steel,alum.I spread the tubes a little at a time in various dumpsters that allow for haz/waste.I even know a guy that works at the haz/waste facility here in town,even done business with him in the past.A good percentage of the projection tv I will sell straight out to a few repair shops that usually buy these from me. There are a few good boards in most of these.More than likely I may pass on this,but I'm not afraid I'll lose money on it.Too many scrappers in the area that wouldnt mind doubling their money on these.I agree that I should charge him,because I know this is costing him money in rent each month.I would like to make some sort of deal with him though because he has 100lbs of chips with ceramic mixed in,along with about 20 lbs memory, a few thousand server hard drives,and 100 computers I would like to buy from him.He does recycle drives and business pickups throughout the southeast so this will be on going.

  30. #17
    irondale started this thread.
    SMF Badges of Honor


    Member since
    Nov 2011
    Posts
    62
    Thanks
    26
    Thanked 14 Times in 9 Posts
    If I can convince him to ship to Canada,would you Admiral look after these loads and split profit with me?

  31. #18
    hobo finds's Avatar
    SMF Badges of Honor


    Member since
    Nov 2010
    Location
    tucson, az
    Posts
    4,746
    Thanks
    6,035
    Thanked 5,907 Times in 2,555 Posts
    Quote Originally Posted by irondale View Post
    Thank you all for the advice. One of my plans was to get 1 trailer have him park it in one of those month to month trailer and rv parking places for around $100 or less/month,resale most if not all for $1-2 each to my fellow recyclers I have contact with in the area,I believe they would be happy to double or triple their money,plus this would spread the workload and disposal per person.In the past I have gotten a free 26ft boxtruck full and made about $600 ,that was about 6 months ago.It took me a week to finish by myself.Sold the plastic for 5 cents/lb,the unstripped low grade for 10-15 cents/lb ,copper steel,alum.I spread the tubes a little at a time in various dumpsters that allow for haz/waste.I even know a guy that works at the haz/waste facility here in town,even done business with him in the past.A good percentage of the projection tv I will sell straight out to a few repair shops that usually buy these from me. There are a few good boards in most of these.More than likely I may pass on this,but I'm not afraid I'll lose money on it.Too many scrappers in the area that wouldnt mind doubling their money on these.I agree that I should charge him,because I know this is costing him money in rent each month.I would like to make some sort of deal with him though because he has 100lbs of chips with ceramic mixed in,along with about 20 lbs memory, a few thousand server hard drives,and 100 computers I would like to buy from him.He does recycle drives and business pickups throughout the southeast so this will be on going.
    Uh might as well just pull off all the good stuff and dump the rest wherever you can, as that is what these $1 tv/monitor buyers are goanna do with it...

  32. The Following User Says Thank You to hobo finds for This Post:


  33. #19
    irondale started this thread.
    SMF Badges of Honor


    Member since
    Nov 2011
    Posts
    62
    Thanks
    26
    Thanked 14 Times in 9 Posts
    I agree ,all I can do is ask them to do the right thing and dispose properly .Sell a gun some will hunt with it some may murder.Sell a car some may go to school with it ,some may rob banks with it.What can you do, but hope for the best.

  34. #20
    hobo finds's Avatar
    SMF Badges of Honor


    Member since
    Nov 2010
    Location
    tucson, az
    Posts
    4,746
    Thanks
    6,035
    Thanked 5,907 Times in 2,555 Posts
    Quote Originally Posted by irondale View Post
    I agree ,all I can do is ask them to do the right thing and dispose properly .Sell a gun some will hunt with it some may murder.Sell a car some may go to school with it ,some may rob banks with it.What can you do, but hope for the best.
    Then I would have to pass on this, even for a friend. Figure out a way for someone to buy it all or nothing, can't part it out... pass it on!


  35. Similar threads on the Scrap Metal Forum

    1. rear projection TV.
      By EcoSafe in forum General Electronics Recycling
      Replies: 16
      Last Post: 04-30-2015, 11:50 PM
    2. Replies: 51
      Last Post: 02-17-2015, 06:57 PM
    3. PCBS???????????? Projection tv's
      By chowdha in forum Scrap Metal Questions and Answers
      Replies: 19
      Last Post: 04-06-2014, 10:59 AM
    4. projection lamps
      By TheRecycleGuy in forum A Day in the Life of a Scrapper
      Replies: 5
      Last Post: 09-23-2013, 07:51 PM
    5. projection tv
      By Copper Head in forum A Day in the Life of a Scrapper
      Replies: 2
      Last Post: 03-11-2013, 08:46 PM

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook