Results 1 to 9 of 9

watching Ps and Qs

| General - Let's talk business
  1. #1
    EcoSafe started this thread.
    EcoSafe's Avatar
    SMF Badges of Honor



    Member since
    May 2011
    Posts
    3,705
    Thanks
    3,713
    Thanked 6,807 Times in 1,954 Posts

    watching Ps and Qs

    gold has been going down and shipping going up as well as all other things needed to scrap e waste. tools, fuel ect.

    for example a low end dell work station or hospital computer is now worth about $8 totaly scrapped out as apposed to about $12 a year or so ago. This BS that the inflation rate (cost of doing business or living) is at one percent or lower is just that total B.S.. just look at the cost of food utilities. fuel and other esentials that were dropped from the inflation index a couple of years ago.

    Our gross inventory here at EcoSafe has risen dramatically over the past year, but, because of inflation our bottom line is still about the same or even less if we don't watch our Ps and Qs. Un fortunately I have just never been a Ps and Qs kind of guy so it is a difficult learning process for me.

    Just today we got in about 700 to 800 lbs and I will spend the day tomorrow shopping shippers, it has come to the point where a penny or two a pound is significant in the bottom line.

    I also tend to give the customer the benefit of doubt on pricing unfamiliar boards. for fear of losing the customer, another habit I'm trying hard to break. If you are in danger of losing money on the deal then loosing the customer can sometimes be the right thing to do.



    To chase down a scrap computer or even 2 or 3 paying $5 ea. for them then going to get them in today's market is a loosing proposition. many only realize that after 6 month or so of hard work only to realize their bank account is empty
    and they are borrowing the mortgage or car payment to buy inventory. (been there done that). MCW Just sayin.

    I posted this earlier on Marios site. thought it might help others who don't visit that sight very often. mcw
    "anyone who thinks scrappin is easy money ain't doin it right!"

  2. The Following 5 Users say Thank You for This Post by EcoSafe:



  3. #2
    EcoSafe started this thread.
    EcoSafe's Avatar
    SMF Badges of Honor



    Member since
    May 2011
    Posts
    3,705
    Thanks
    3,713
    Thanked 6,807 Times in 1,954 Posts
    I posted this thread, not to criticize, but as a boost to help other struggling with falling e waste prices we must learn to adapt and overcome.

  4. #3
    Phantoms001's Avatar
    SMF Badges of Honor



    Member since
    Mar 2012
    Location
    Indiana
    Posts
    556
    Thanks
    167
    Thanked 529 Times in 243 Posts
    I think the falling prices are certainly going to thin the herd. I've started trying to resell everything possible to make up for the drop in prices but was really surprised how slow desktops sell. I personally prefer a desktop to a laptop but I certainly may be in the minority.

  5. The Following User Says Thank You to Phantoms001 for This Post:


  6. #4
    Ironhunter's Avatar
    SMF Badges of Honor


    Member since
    Oct 2013
    Location
    Illinois
    Posts
    234
    Thanks
    66
    Thanked 156 Times in 74 Posts
    I think alot of us e scrappers (me included) are in the "hoarding" phase, waiting for the prices to rise and to get enough inventory to have a couple good shipments when the prices hopefully rebound, JM $.02
    Urban Mining: When people give you free money.

  7. #5
    EcoSafe started this thread.
    EcoSafe's Avatar
    SMF Badges of Honor



    Member since
    May 2011
    Posts
    3,705
    Thanks
    3,713
    Thanked 6,807 Times in 1,954 Posts
    Problem is I can,t afford to hoard. got a nut to crack and with the lease in Omaha running now I've got two nuts to crack.

  8. #6
    Mechanic688's Avatar
    SMF Badges of Honor



    Member since
    Mar 2011
    Location
    Warsaw , Ind. In the heart of the lakes, and down the street from the hotel where Al Capone stayed.
    Posts
    9,568
    Thanks
    11,247
    Thanked 10,730 Times in 4,728 Posts
    Phantom, I have found that just about every audio and video card I take the time to list sells for 9.95 - 19.95 ea. Certainly much better than xx per lb. I run them thru a 5-7 day auction (depending on how the sold ones look) and if they don't sell after twice then in the pile they go.
    P & M Recycling - Specializing in E-Waste Recycling.
    If you enjoy your freedom, thank a vet.

  9. The Following 3 Users say Thank You for This Post by Mechanic688:


  10. #7
    parrothead's Avatar
    SMF Badges of Honor


    Member since
    Jan 2011
    Location
    Treasure Coast, FL
    Posts
    2,416
    Thanks
    667
    Thanked 2,067 Times in 953 Posts
    I've been "retooling". Switching towards getting customers that want to just avoid a fee for getting rid of their stuff. That and resale make a good mixture.
    "64K should be enough for anybody." - Bill Gates 1981
    http://www.treasurecoastelectronicrecycling.com/

  11. #8
    Abshere's Avatar
    SMF Badges of Honor



    Member since
    Nov 2013
    Location
    WI
    Posts
    100
    Thanks
    22
    Thanked 96 Times in 35 Posts
    I haven't been getting anything in lately. A lot of it is the competition in my area. Seems that everyone and their brother decided to get into e-waste at the same time. I have branched out into doing home clean-outs in the hopes of getting some items that are decent to resell. In the job I accepted right now, I will be getting a queen bed frame, couple dressers, working fridge(could use down in my work area so I don't have to load up the upstairs fridge with pop and food), kitchen table set. Did find a Dremel tool. Bought the bits for it for $20 at WalMart. Works great and probably keeping that. When I started out with scrapping, I spent everyday out in my garage tearing stuff apart and trying to find room to take in more. Now, spending most of my time during my day job posting ads for scrap and talking to people. Then coming home and getting a couple things tore down. Not much inventory here. I am with olddude on hoarding. Just can't afford to hold onto much if anything.

  12. #9
    SMF Badges of Honor


    Member since
    Nov 2013
    Location
    San Jose, CA
    Posts
    12
    Thanks
    10
    Thanked 14 Times in 7 Posts
    Great post, olddude. I think that scrappers like you who look ahead and adapt to changing markets, and who can objectively and honestly identify areas for improvement will be the ones who can survive through lower prices. Branching out into resale will probably be necessary for most of us smaller folks. It is more time consuming, more work on the back end, and makes for a much slower turn over of inventory, but my boyfriend and I discovered almost immediately that the return is much higher. Resale compared to scrap is the same stuff with a different set of challenges. Breakdowns are done with more care, organization is completely different, the value comes from different properties, money is spent on shipping rather than gas, and the profits come in little by little instead of in big chunks. My bf and I are both pretty tech-savvy so we are able to do some computer repair/rebuilding, but for our day to day bread and butter we haul in steel (low payout but it is abundant) and redeemable bottles and cans. We also collect tech stuff for scrap, mainly stuff that is broken or not worth selling, but it takes a loooong time for that to add up to much.

    ~Anna
    YouThinkItScrap

  13. The Following User Says Thank You to AnnaScrap for This Post:



  14. Similar threads on the Scrap Metal Forum

    1. Watching the Liars Tonight?
      By Kris Kringle in forum Off Topic Discussions
      Replies: 24
      Last Post: 01-27-2012, 11:42 PM

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook