Experienced Scrapper
|
Today's project was a 1999 Compaq Desk Top. How do you break down the Pentium 3 It has the black alum fin on top and haven't figured out how to remove it. Breakdown was fun. If I did my reading right and understood it, this is a model before the company was bought out my HP. No monitor was with it. Any advice with out damaging the Pentium 3?
Metal Recycling Entrepreneur
sometimes they're stuck pretty well, might try a razor knife around it ever so carefully, and don't cut yourself! i've used knifes, or chisels, anything it took to get them apart.
Metal Recycling Entrepreneur
I use a thin flathead screwdriver. Just pop it in and apply some leverage until it snaps off.
Also a well aimed hammer blow can help a lot. Fun huh? Mike.
"Profit begins when you buy NOT when you sell." {quote passed down to me from a wise man}
Now go beat the copper out of something, Miked
|
I tried this awhile ago and shattered a $30/lb ceramic CPU. I'd try a razorblade or screwdriver insteadOriginally Posted by miked
There's nothing more fun and more effective than hitting something repeatedly with a sledgehammer
Which $30/lb cpu is in what I recognize and the normal heatsink/plastic housing used on Pentium 2 and 3 slot processors? At least I "assumed" the originator was asking about a slot processor.
The ceramic ones I have had stuck to the heat sink I also used a screwdriver or blade to break them apart. I did have three that were stuborn and I ended up breaking one, it was a ceramic pentium 1. I put the pieces in the bag with the other Pentium cpu's. Mike
Here's a photo of my last group of ceramic cpu's
|
Mike quit rubbing it in,,, You like doing that, doncha,,,??
P & M Recycling - Specializing in E-Waste Recycling.
If you enjoy your freedom, thank a vet.
Metal Recycling Entrepreneur
i presumed it was a socket p3, i bought of those compaqs in 2000 and it was a p3 socket, but later with the different comments began to wonder myself which one he had
Bear thats why I used the "assumed" in quotes. I assumed I might be wrong, something I seem to be good at.
Mech, I truely never get tired of showing off. Thanks for noticing, Mike.
Metal Recycling Entrepreneur
|
Great collection Miked. IK been working on some old Packard Bells, and they had 2 CPU's. 1 big, 1 small. Used a small flat head to pop out. These big office printers have been whipping my butt. So many screw's!
|
there are two stasinless strips on the back attached to the pegs in the heat sink, pry those off and the prosessor comes off.
Metal Recycling Entrepreneur
Were you trying to break it away from the heatsink, or remove it from the board ? Looks like here a picture might have been worth a thousand words. Getting it off the board you need to release the spring leafs holding the heatsink in place(usually they just press down somehow to release the catches from the sides of it). Then unsnap the latch holding it to the motherboard. Then it should lift right out. Then, if you still need to separate the heatsink and CPU, see comments 1-11 lol
|
|
Oh, I thought he was referring to a normal processor. My mistake
|
I position a flathead screwdriver between the processor and the heatsink and just lightly tap the screwdriver with a hammer. The two will indeed separate.
“Most people miss opportunity because it wears overalls and looks like work .” ― Thomas A. Edison
www.thortekrecycling.com
There are currently 1 users browsing this thread. (0 members and 1 guests)
|
Browse the Most Recent Threads
On SMF In THIS CATEGORY. 
OR 
|
Posting Permissions
Register To Reply
Bookmarks