Results 1 to 15 of 15

Constant escrap load opportunity. input welcomed!

| General Electronics Recycling
  1. #1
    prgiva started this thread.
    SMF Badges of Honor

    Member since
    Aug 2011
    Posts
    79
    Thanks
    13
    Thanked 30 Times in 16 Posts

    Constant escrap load opportunity. input welcomed!

    I made a contact when I ran into an auction today.

    This guy needs to clear out his warehouse around a bi monthly basis...
    Says he needs 2 pallets of Computers. mostly Dell Optiplex gx220's which have pretty much zero resale value. (atleast here in the states!)
    its a 50/50 chance that they have either HDD or RAM in them.

    and one pallet of misc. items such as printers/fax machines/ phones yadda.

    he asked me if i would take them off his hands.
    He threw a number of $7 per unit at me. I'm assuming he meant just the comps.

    I'm going to try and bring him down to $6 per.

    Never discussed a price on the misc. items.

    He's sending me a list of his goods tomorrow.

    thoughts? I'd love to takem for 6 but its still pretty much worth it at 7 right?

  2. The Following User Says Thank You to prgiva for This Post:



  3. #2
    SMF Badges of Honor



    Member since
    Jul 2011
    Location
    Jacksonville, NC
    Posts
    4,917
    Thanks
    15,632
    Thanked 5,861 Times in 2,713 Posts
    I would also want to pay $6 each and throw in the extras for free. Depending on your situation things could be different. There has been a lot of discussion of the p4 mb's being a lower grade and therefore a lower price or lower price comming. Having said that a regular supply of computers to break down for a one man operation like me would be great. Best to you, Mike.
    "Profit begins when you buy NOT when you sell." {quote passed down to me from a wise man}

    Now go beat the copper out of something, Miked

  4. The Following User Says Thank You to miked for This Post:


  5. #3
    SMF Badges of Honor


    Member since
    Nov 2011
    Posts
    101
    Thanks
    40
    Thanked 24 Times in 12 Posts
    Like the quote say's at the bottom of mikes post " PROFIT BEGINS WHEN YOU BUY NOT WHEN YOU SELL" I would try $5 you can always go up but rarely can you go back down. Good Luck wb

  6. The Following 2 Users say Thank You for This Post by wildbillhappy:


  7. #4
    Mechanic688's Avatar
    SMF Badges of Honor



    Member since
    Mar 2011
    Location
    Warsaw , Ind. In the heart of the lakes, and down the street from the hotel where Al Capone stayed.
    Posts
    9,568
    Thanks
    11,247
    Thanked 10,730 Times in 4,728 Posts
    Depending on whether the computers are complete, I've been noticing that a lot of them have the HD's pulled out. I would say scrap wise there is $10 to $15. value in them depending on how well you break them down and market them. Printers might have a little value if they have card readers.
    P & M Recycling - Specializing in E-Waste Recycling.
    If you enjoy your freedom, thank a vet.

  8. #5
    PartTimeScrapper's Avatar
    SMF Badges of Honor



    Member since
    Aug 2011
    Location
    Morrison, Colorado
    Posts
    3,400
    Thanks
    1,004
    Thanked 3,256 Times in 1,335 Posts
    If those towers have dvdrw drives in them it wouldnt be a bad deal. But if they are just MB cpu and maybe pci cards I think $7 would be a little high. I wouldnt pay more than half of shred price for the rest of the stuff.

  9. #6
    prgiva started this thread.
    SMF Badges of Honor

    Member since
    Aug 2011
    Posts
    79
    Thanks
    13
    Thanked 30 Times in 16 Posts
    Just got off the phone with they guy.

    He agreed to $5 a piece. I'm picking them up monday morning.
    I should have went lower as he was quick to agree. Especially considering that its a grab bag whether or not there will be either RAM or HDD in the units.
    He told me he's not ACTIVELY looking into these things to tear out memory but who knows.
    if they're all carcasses... then I'll eat it on this first deal and go lower the next time around.

    We'll see when Mon. rolls around

  10. The Following User Says Thank You to prgiva for This Post:


  11. #7
    SMF Badges of Honor



    Member since
    Jul 2011
    Location
    Jacksonville, NC
    Posts
    4,917
    Thanks
    15,632
    Thanked 5,861 Times in 2,713 Posts
    That's great news. Take pictures, Mike.

  12. #8
    prgiva started this thread.
    SMF Badges of Honor

    Member since
    Aug 2011
    Posts
    79
    Thanks
    13
    Thanked 30 Times in 16 Posts
    I did a quick glance over of the materials that i got and its not looking too good.

    picked up 49 towers today at $5 a piece.

    about 35 of them are dell GX 280s. it looks like most have been gutted. Leaving only the mother board, cdrom/floppy drives, video cards.
    Half of the CPU's look like they've been taken out.

    the rest of them are really old pentium 2/3's which look to be pretty much intact. heavy @$$ towers.

    He warned me that most of them were pretty bare on the inside when i got there.
    i told him that I'd keep my word and buy everything at the price that I had told him on the phone, but that moving forward I'd have to adjust the pricing depending on what I saw in this current batch.
    I know that I pretty much am just hoping to break even on this deal.

    He appreciated that I was honest and a man of my word and he told me he'd be calling me the next time he has another bundle and understood that I'm going to be coming with a much lower price.

    I think I'm going to have to go with a straight per/lb price on the items with him. maybe closer to shred...

    Once I get time I'll catalogue what I make out of this.

    I'll consider this one an education

  13. The Following User Says Thank You to prgiva for This Post:


  14. #9
    SMF Badges of Honor



    Member since
    Jul 2011
    Location
    Jacksonville, NC
    Posts
    4,917
    Thanks
    15,632
    Thanked 5,861 Times in 2,713 Posts
    Exactly what I would have expected, not as good as you hope but an education and a little profit. Congrats, Mike.

  15. #10
    PartTimeScrapper's Avatar
    SMF Badges of Honor



    Member since
    Aug 2011
    Location
    Morrison, Colorado
    Posts
    3,400
    Thanks
    1,004
    Thanked 3,256 Times in 1,335 Posts
    Aslong as they have the MB in them you should be close to breaking even. IF you want to make sure you make a profit look at all the cdrom drives and see if any are DVDRW drives. Also check all the hard drives and ram. Ill buy any you get for more than scrap value if they meet what im looking for.

  16. #11
    directrecycle's Avatar
    SMF Badges of Honor

    Member since
    Oct 2011
    Posts
    520
    Thanks
    95
    Thanked 467 Times in 226 Posts
    throw some memory in the gx 280's. if they work we are currently getting around 25 dollars ea for them with no harddrive

  17. #12
    prgiva started this thread.
    SMF Badges of Honor

    Member since
    Aug 2011
    Posts
    79
    Thanks
    13
    Thanked 30 Times in 16 Posts
    Quote Originally Posted by directrecycle View Post
    throw some memory in the gx 280's. if they work we are currently getting around 25 dollars ea for them with no harddrive
    Really?

    "Something is only as worth as much as someone will pay for it" is what my father always told me.

    Where are you finding these buyers? Ebay?

  18. #13
    thortek's Avatar
    SMF Badges of Honor

    Member since
    Jan 2012
    Location
    Scrap biz in OHIO, but I live in south Florida!
    Posts
    513
    Thanks
    153
    Thanked 425 Times in 204 Posts
    I'll sell you some ram! I have a TON of 256mb sticks! I also have a few cpus...Hit me up I'll make you a deal, just have to tell me what you need....and I'll see if I have it.
    “Most people miss opportunity because it wears overalls and looks like work .” ― Thomas A. Edison

    www.thortekrecycling.com

  19. #14
    SMF Badges of Honor



    Member since
    Feb 2012
    Location
    OK
    Posts
    5,728
    Thanks
    6,814
    Thanked 3,464 Times in 1,989 Posts
    I could use a p3 and some ram myself

  20. #15
    SMF Badges of Honor


    Member since
    Nov 2011
    Location
    Waterford, WI
    Posts
    78
    Thanks
    179
    Thanked 64 Times in 24 Posts
    I think if your getting the systems @ $5 or less(even partially gutted) with other scrap free you can do alright as long as it doesn't take you away from other opportunities. Not a huge money maker but keeps you busy and making a profit.



  21. Similar threads on the Scrap Metal Forum

    1. Missed escrap opportunity
      By faulguy in forum A Day in the Life of a Scrapper
      Replies: 4
      Last Post: 10-29-2013, 10:01 PM
    2. How to strip copper from a constant motor
      By demillo in forum Scrap Metal Questions and Answers
      Replies: 20
      Last Post: 07-30-2012, 06:23 PM
    3. New Website - Input Please
      By erg in forum General - Let's talk business
      Replies: 3
      Last Post: 07-19-2012, 03:31 AM
    4. opportunity I need input on...
      By Ecycle Atlanta in forum Scrap Metal Questions and Answers
      Replies: 8
      Last Post: 09-14-2011, 10:01 AM

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook